Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 14 of 14 for “"Road materials--Testing"”.
-
Salt migration in highways fills
Thesis (M.S.)--Michigan State University. Dept. of Civil Engineering, 1968
-
Regression and neural network modeling of resilient modulus based on routine soil properties and stress states.
The laboratory results from the fourteen sites from fourteen counties were used to develop the relationships or models.
-
An acceptance test for chip seal projects based on image analysis
… techniques performed by many DOTs, county road departments and cities. One of the most important parameters affecting performance of a chip seal is the percent aggregate embedment depth into the binder. Depending on the percent embedment of aggregates in chip seals, they may be susceptible …
-
Design and evaluation of chip seals through image-based microstructural parameters and performance tests
"Chip seal is one of the most popularly adopted pavement preservation strategies. A chip seal treatment is constructed by adding hot asphalt or emulsion on the surface of an existing pavement, spraying aggregates on the top, followed by roller compaction. Extensive research has led to the …
-
Polymer/fiber modified asphalt fracture mechanisms and microstructure relationships to distresses and environmental factors
Thesis (M.S.)--Michigan State University. Department of Chemical Engineering, 1993
-
EVALUATING THE PERMEABILITY OF POROUS AGGREGATE CONCRETE USING ELECTRICAL RESISTIVITY-BASED MEASUREMENTS
Recycled concrete aggregates (RCA) and lightweight aggregates (LWA) are popular alternative aggregates for concrete. However, due to their highly porous structure, concrete with RCA and LWA shows a different microstructure and higher permeability than conventional concrete. Thus, the existing …
-
Evaluating cracking performance of polymer enhanced and fiber reinforced microsurface mixtures using asphalt laboratory testing
… mixtures using common asphalt laboratory testing. A preliminary optimal timing study and a study to evaluate improvements to cracking performance were conducted. The control mixture was based on NJDOT standard mix design specifications. Three mixtures were tested in this study: a fiber …