Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 43 for “"Robots Dynamics"”.
-
Physical modeling of tools necessary for robot manipulation
Previous research on modeling general processes has focused on physical and empirical modeling of dedicated process machines which have sufficient stiffness and accuracy. For example, machining centers have relatively high stiffness and exhibit negligible deflections. Robot manipulators have low …
-
Sketch-based navigation for mobile robots using qualitative landmark states
In this work, a system for navigating a mobile robot along a sketched route is proposed. The sketch is drawn on a PDA screen by a human operator and contains approximate landmarks and a path, similar to a sketch provided to another person to reach a goal. The robot receives the sketch and detects …
-
Real-time compensation of static deflections in robotic manipulators
… more flexible than common industrial robots, it serves as a near worst-case test for deflection modeling. The end effector was found to deflect as much as 1.5 inches due to the weight of the links and joints. The deflection model was able to compensate for 94% of the end-effector …
-
Improvements in the control of robotic motion simulations using the ATB model
Modifications were made to the control model for torque generation in the Air Force Articulated Total Body (ATS) simulation computer program. Limb motion stability was improved by introducing integral control in the existing feedback control equation. Motion studies were performed using a Merlin …
-
Controlling the cooperative behavior of a system of autonomous mobile robots
… that uses 'swarms' of small autonomous mobile robots to collectively lift and move palletized loads. The robots are relatively unsophisticated in design and have no advanced sensory or communications capability. There is no central or supervisory controller directing the robots. Each robot must …
-
An autonoumous mobile robot system with adaptive navigation strategy and vision-based motion planning
Thesis (Ph. D.)--Michigan State University. Department of Electrical Engineering, 1995
-
Position and vibration control of flexible space robots
… vibration control of flexible articulated space robots consisting of a rigid platform, two flexible arms, and a rigid end-effector carrying a payload, all components being serially connected through revolute joints. The mission is to carry a payload over a prescribed trajectory in the inertial …
-
Biped Locomotion: Stability analysis, gait generation and control
… is an important domain of research in Bipedal Robots. Dynamics of the foot-link plays a key role in the stability of biped locomotion. Biped locomotion can be either with flat-foot (foot-link does not loose contact with ground surface) or with foot-rotation (foot-link rotates about toe). The …
-
Geometric-based spatial path planning
Cartesian space path planning involves generating the position and orientation trajectories for a manipulator end-effector. Currently, much of the literature in motion planning for robotics concentrates on topics such as obstacle avoidance, dynamic optimizations, or high-level task planning. The …
-
Dynamically expanding occupancy grids
Previous evidence grid based robot architectures have used static arrays for representing the environment map. We present a method for dynamically sizing the environment map. Basically, the mobile robot explores and as it explores the map grows in a non-rectilinear fashion. Thus, the area formed as …
-
Analysis and implementation of a navigation system using vanishing points in a generalized environment
… importance in navigation of mobile autonomous robots. The following master's thesis analyzes the use of vanishing points for robot navigation. Parallel lines in the environment of the robot are used to compute vanishing points which serve as a reference for guiding a robot. To accomplish the …
-
Analytical and experimental study of robotic peg-in-hole insertion
<p>A mathematical model of robotic peg-in-hole insertion, which relates insertion force and moment to manipulator compliance and geometric constraints, is presented. Based on this model, the effects of manipulator compliance and geometric and positional parameters on the insertion are studied. The …
-
Mobile robot path planning based on hierarchical hexagonal decomposition
<p>In this thesis, a new algorithm based on hierarchical cell decomposition and artificial potential field is developed to solve the find-path problem for a mobile robot. The basic cell structure used for decomposition is a hexagon. The artificial potential field is based on an attractive force …
Page 1 of 3