Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 93 for “"Rock material"”.
-
Performance evaluation of cover systems constructed of Paste Rock material
… environmental problems associated with Acid Rock Drainage during operations as well as post-mining. But given the wide differences between geographical and climatic conditions in which mines operate, it is impossible to create a universally usable recipe. To overcome the challenges posed by …
-
Assessment of blended waste rock material at Zinifex Century Mine: consequences for acid drainage generation
There is little doubt that acid rock drainage (ARD) is the largest and most testing long-term environmental issue facing the global minerals industry (Lawrence and Day, 1997, Munchenberg, 1998, Olson et al. 2006). The aim of this study was to assess leachate quality from different blends of waste …
-
Development and evaluation of an instrumentation system for high acceleration centrifuge testing of an artificial rock material
… acceleration centrifuge testing of an artificial rock material. A stress analysis of the centrifuge rotor was performed to ensure its safe operation. The centrifuge was found to be safe for operation to a maximum of 1000 rpm for a payload of 15 pounds (6.82 kg). The instrumentation system …
-
Predicting the breakdown pressure in hard rock material subjected to hydraulic fracturing and quantifying fluid flow within a fracture network
… regeneration capacity through a volume of rock fragments for ventilating mine workings. This system can provide heating (during winter) and cooling (during summer) of air on seasonal basis, without using artificial refrigeration. Optimizing the system requires creation of a specific volume …
-
Prediction of breakdown pressures and fracture propagation surfaces in a rock material subjected to hydraulic fracturing using intact specimens and specimens with a replicated crack
… resource industries to change the properties of rock material below the surface of the Earth. This method induces fracturing in a rock mass by injecting highly pressurised fluid into the crust. These resultant fractures can enhance the rock permeability and hence increase the efficiency of …
-
Quantification and Clustering of Microcrack Tensor Invariants
In the field of rock mechanics, the behaviour of hard rock materials such as granite are known to depend strongly on the nature of discontinuities present in the material. Even so-called intact rock samples, collected between discontinuities such as joints, often contain microcracks. Microcracks …
-
Investigating Mineral Weathering and Metal Transport through Century-Old Ore Chimney Waste Rock
… the long-term weathering of a 100-year-old waste-rock pile at the Ore Chimney mine. Three vertical trenches were excavated, and waste-rock material was sampled at 0.5 m depth intervals. Waste-rock material was sieved into fine (< 0.5 mm) and coarse (0.5 to 2.0 mm) grain size fractions and used to …
-
Continuum Damage Modeling of Rocks Under Blast Loading
Rock fragmentation by blasting has been in practice in civil and mining industries for centuries. The controlled use of explosives is considered the dominant approach for the purpose of breaking the rock material in any hard rock mining. The fracturing process of rock material, when subjected to …
-
Προσδιορισμός μηχανικών παραμέτρων του βραχώδους υλικού και εφαρμογή αυτών στην εκτίμηση της αντοχής και παραμορφωσιμότητας της βραχομάζας
… of the mechanical properties of intact rock and their application to the estimation of the strength and deformability of the rock mass. There has been made an attempt to set up the boundaries in rock material behavior and to formulate empirical correlations between rock material …
-
The Role of Horizontal Stress in the Formation of Valley Stress Relief Features in Flat-Lying Sedimentary Rocks
… linear elastic models without the inclusion of material plasticity. Stress conditions include gravitational loading as well as a regional horizontal stress. The results of this analysis were compared to previous studies. Next, a layered geologic sequence including plastic slip along bedding is …
-
Investigation of hydrological and geochemical properties and spatial relationships of an unsaturated waste rock pile, Key Lake, Saskatchewan
… drainage (ARD) are not well understood in waste rock material. In particular, relationships between subsurface flow and the timing, duration, and intensity of leaching of metals and acidity from waste rock dumps remain ill defined. This study investigates field-scale relationships between …
-
Analytical and Numerical Modelling of Thermal Conductive Heating in Fractured Rock
… Modelling was conducted in a fractured bedrock environment containing a system of parallel, equally-spaced horizontal fractures. A semi-analytical solution to the two-dimensional heat conduction equation was developed and used to study temperature distributions between two thermal wells. A …
-
Improvement of Biochar Through Ozonization and Biosafety of Genetically Engineered Cyanobacteria
… one, the incubation of an insoluble phosphate rock material (hydroxyapatite) with the wet ozonized pine 400 biochar and its filtrate resulted in a solubilization of 80 times more phosphate from hydroxyapatite (569.0 mg/L ± 6.4) compared to the pure water-hydroxyapatite control (7.2 mg/L ± 0.3). …
-
Analysis of rock performance under three-dimensional stress to predict instability in deep boreholes.
Underground rock formations are always under some stress, mostly due to overburden pressure and tectonic stresses. When a borehole is drilled, the rock material surrounding the hole must carry the load which was initially supported by the excavated rock. Therefore, due to the introduction of a …
-
Optimising hydraulic fracture treatments in reservoirs under complex conditions
… complex in-situ stress distribution, large material property contrasts and unique production mechanism complicate the implementation of hydraulic fracture treatments in CBM and gas-condensate reservoirs respectively. An integrated approach to optimise hydraulic fracture treatments in …
-
Characterisation and amelioration of low pH conditions in pyritic mine pitwall materials, Martha Mine, Waihi, New Zealand : a thesis submitted in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Soil Science, Massey University
… the generation of low pH conditions in pitwall rock material at Martha Mine, Waihi, and evaluate the ameliorating effectiveness of some selected acid neutralising materials with an aim to create suitable plant growth media. Approximately 25% of the current pitwall area is affected by pyrite …
-
Using an Inventory of Unstable Slopes to Prioritize Probabilistic Rockfall Modeling and Acid Base Accounting in Great Smoky Mountains National Park
… fourteen sites for two-dimensional probabilistic rockfall simulations and Acid Base Accounting (ABA) tests. Simulations indicate that rock material would likely enter the roadway at all fourteen sites. ABA test results indicate that influence of significant acid-producing potential is generally …
-
Γεωτεχνική διερεύνηση μολασσικών σχηματισμών της λεκάνης των Γρεβενών
The shear strength of geological materials is of great importance for the mechanical behavior of geological formations within the framework of construction of technical works. In the case of rock formations, this behavior depends on both the mechanical characteristics of the intact rock material …
-
Investigation of underground mine pillar design procedures
… openings and to carry the load of overlying rock strata. They are often (partially or completely) recovered at a later stage when their stabilizing effect is no longer required. For economic reasons, an optimum-sized pillar is the smallest one satisfying safety requirements. Thus the pillar …
-
An investigation of enhanced thermosolutal axial dispersion in a horizontal concentric annular enclosure
… from the heated waste packages to the host rock. Material failure due to corrosion is a significant issue due to the hazardous materials being stored and the extensive project design life of 10.000 years. The objective of the experimental investigation is to quantify the axial dispersion of …
Page 1 of 5