Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 8 of 8 for “"Rod Bundle Geometry"”.
-
Positron Emission Tomography (PET) for Flow Measurement
… in opaque fluids and for flow within complex geometry where conventional optical flow measurement approaches fail. This study explores the capabilities of PET as flow measurement tool suited to validation of computational fluid dynamic (CFD) predictions.</p> <p>The MicroPET P4 scanner was used …
-
Three-Dimensional Velocity Measurement Reconstruction for a Rod Bundle Array using Matched Refractive Index Particle Tracking Velocimetry
… reactor (PWR), pressurized water flows over fuel rods containing radioactive uranium. Potential failure of these nuclear fuel rods is a primary concern, as fuel rod failure typically results in power generation losses and reactor downtime. Thermal parameters such as critical heat flux have …
-
Advanced Experimental Characterization of Bubbly Flows in Rectangular and Rod-Bundle Geometries
… of bubbly flows in rectangular and rod-bundle geometries. A comprehensive experimental investigation was conducted in a 30 mm × 10 mm rectangular channel to establish a high-resolution, validation-grade bubbly-flow database. Gas-phase and liquid-phase measurements were obtained using …
-
Implementation of Wire Mesh Sensor Principles into New Needle Probe for Characterization of Two-Phase Flow Parameters
… conditions is needed. A new full-scale heated rod bundle facility was designed to capture high fidelity void fraction data. There are several techniques in the literature for measuring void fraction, each with its own advantages and weaknesses. One such technique, the wire mesh sensor, which …
-
Study of cross flows and large flow structures in nuclear reactors
… gap regions. The axial variation of the brick geometry has also been found to significantly influence the distribution of the temperature within the brick. It is also found that there may be flow instabilities in the flows in the lower level of the AGR fuel channels. Large-eddy simulation (LES) …
-
Experimental Analysis and Improved Modelling of Disperse Two-Phase Flows in Complex Geometries
… accurate CFD prediction for a fuel assembly geometry is still a challenge. The reason is that the accuracy of two-phase flow simulations is highly dependent on adequate modelling of phase interactions including interfacial forces (i.e. drag, lift, wall lubrication, turbulent dispersion and …