Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 47 for “"Rogowski coil"”.

  1. Ω-shaped Rogowski Coil Current Sensor Optimization Design in Power Electronics Applications

    … sensor, consisting of an Ω-shaped copper tube, Rogowski coil and an external integrator, to achieve precise switching current measurement. The designed structure allows easy integration into various current paths. And a multi-objective optimization based on a genetic algorithm and a finite …

    arkansas Repository record for Ω-shaped Rogowski Coil Current Sensor Optimization Design in Power Electronics Applications (opens in a new tab)

  2. Partial discharge detection for condition monitoring of covered-conductor overhead distribution networks using Rogowski coil

    … at different locations on the CC line using a Rogowski coil. The time domain reflectometry (TDR) measurement technique is presented to extract the frequency-dependent wave propagation characteristics (attenuation, phase constant, and propagation velocity) of CC overhead distribution lines. The …

    aalto Repository record for Partial discharge detection for condition monitoring of covered-conductor overhead distribution networks using Rogowski coil (opens in a new tab)

  3. Design and Implementation of Partial Discharge Measurement Sensors for On-line Condition Assessment of Power Distribution System Components

    … conductors (CCs) and cables. A high frequency Rogowski coil induction sensor is designed for this purpose. An accurate electrical model of the sensor is necessary for efficient signal processing of the sensed signal and for reliable interpretation of the measured signal. A new method to …

    aalto Repository record for Design and Implementation of Partial Discharge Measurement Sensors for On-line Condition Assessment of Power Distribution System Components (opens in a new tab)

  4. Partial Discharge Location Technique for Covered-Conductor Overhead Distribution Lines

    … high frequency signals which were measured. A Rogowski coil is used as the measuring sensor. A multi-end correlation-based technique for PD location is implemented using the theory of maximum correlation factor in order to find the time difference of arrival (TDOA) between signal arrivals at …

    aalto Repository record for Partial Discharge Location Technique for Covered-Conductor Overhead Distribution Lines (opens in a new tab)

  5. An investigation of shaft current in a large sleeve bearing induction machine

    … of shaft current measurement, known as the Rogowski Coil Method, was applied to this machine. The experiments included oil analysis and microscopic analysis of the bearing. The experiments showed that the main cause of the shaft current is the presence of joints between stator lamination …

    mcmaster Repository record for An investigation of shaft current in a large sleeve bearing induction machine (opens in a new tab)

  6. The Development of a 1 MV 40 kJ Marx Generator and Pulse Forming Line System

    … location for the operator. Diagnostics include a Rogowski coil to measure the Marx generator current, a quarter-turn Rogowski coil to measure load current, and capacitive voltage dividers on either side of the peaking gap to measure line and load voltages. High voltage charging of the Marx …

    ttu Repository record for The Development of a 1 MV 40 kJ Marx Generator and Pulse Forming Line System (opens in a new tab) Embargoed until 2030-12-01

  7. PCB-Embedded Phase Current Sensor and Short-Circuit Detector for High Power SiC-Based Converters

    … inverter stage, high bandwidth, high performance Rogowski coil switch current sensors are employed. These sensor were embedded on the PCB and integrated on the gate driver. High bandwidth switch current sensor measurement is used for fast short-circuit detection and protection of the SiC MOSFET …

    vt Repository record for PCB-Embedded Phase Current Sensor and Short-Circuit Detector for High Power SiC-Based Converters (opens in a new tab)

  8. High Bandwidth Hybrid Current Sensor Readout Interface for Power Applications

    … of a magneto resistor or Hall sensor and a coil is used to cover a wide frequency band. The lower cutoff frequency of the coil is matched to the 3 dB bandwidth of the used MR/Hall sensor. The achieved flat band response is then limited by the bandwidth of the readout interface. The …

    arkansas Repository record for High Bandwidth Hybrid Current Sensor Readout Interface for Power Applications (opens in a new tab)

  9. The observed disruption of intense runaway electron streams in a plasma betatron

    … x 102 to 8.8 x 103 volts/m were used. Refined Rogowski-coil and scintillationdetector diagnostic techniques were used to study the behavior of the system. Intense runaway electron streams were observed. Disruption of the stream occurred approximately 0.4 usec after its formation. X radiation …

    sask Repository record for The observed disruption of intense runaway electron streams in a plasma betatron (opens in a new tab)

  10. Design and implementation of Silicon-Carbide-based Four-Switch Buck-Boost DCDC Converter for DC Microgrid Applications

    … and off-state drain-source voltage sensors and Rogowski coil-based current sensors are embedded in the gate driver to minimize the requirement for external sensors, thus increasing the power density of the converter unit. Also, Rogowski-coil-based current protection and drain-source …

    vt Repository record for Design and implementation of Silicon-Carbide-based Four-Switch Buck-Boost DCDC Converter for DC Microgrid Applications (opens in a new tab)

  11. An investigation of the noise signals associated with current measurement in a pulsed discharge circuit

    A Rogowski coil has been used for the measurement of a pulsed discharge current. The frequency response of the coil is discussed, and a method which extends this response to higher frequencies (100 Mc/s) is described. It has been found that the noise signals associated with the measurement of a …

    ubc Repository record for An investigation of the noise signals associated with current measurement in a pulsed discharge circuit (opens in a new tab) Download PDF for An investigation of the noise signals associated with current measurement in a pulsed discharge circuit (opens in a new tab)

  12. Design and Characterization of a Coaxial Plasma Railgun for Jet Collision Experiments

    … by analyzing diagnostic data collected from a Rogowski coil, interferometer, and photodiode. Peak line-integrated electron number densities of approximately 8 × 10<sup>15</sup> cm<sup>-2</sup> and jet velocities of tens of km/s are inferred from the data recorded from ten experimental pulses.

    vt Repository record for Design and Characterization of a Coaxial Plasma Railgun for Jet Collision Experiments (opens in a new tab)

  13. Travelling Wave Based DC Line Fault Location in VSC HVDC Systems

    … at each line terminal is measured by using a Rogowski coil and compared with a threshold to detect the wave fronts. Simulation studies in PSCAD showed that fault location accuracy of ±100 m is achievable for a 300 km long cable and 1000 km long overhead line. Experimental measurements in a …

    manitoba Repository record for Travelling Wave Based DC Line Fault Location in VSC HVDC Systems (opens in a new tab)

  14. An integrated-optic current sensor for relaying and metering in high-voltage power systems

    … developed, constructed, and tested here using a Rogowski coil and an integrated-optic Pockels cell (IOPC). The Rogowski coil generates a low-level voltage signal in proportion to the derivative of the primary current. A fully passive integrator is constructed from ultrastable components, …

    ubc Repository record for An integrated-optic current sensor for relaying and metering in high-voltage power systems (opens in a new tab) Download PDF for An integrated-optic current sensor for relaying and metering in high-voltage power systems (opens in a new tab)

  15. Electromagnetic Compatibility, Fault-Tolerance, and Efficiency Enhancements of High-Current Bidirectional 28-V Vehicular Auxiliary Power Modules

    … failures. To address this, a planar pickup-coil-based mixed-signal fault-detection scheme is proposed, capable of identifying device-paralleling failures and overcurrent faults in configurations with up to three paralleled MOSFETs. Third, the failure-mode analysis of the SR-DCX reveals that …

    mcmaster Repository record for Electromagnetic Compatibility, Fault-Tolerance, and Efficiency Enhancements of High-Current Bidirectional 28-V Vehicular Auxiliary Power Modules (opens in a new tab)

  16. Diagnostics and Exploration of Current Sheet Formation in the High-Pulse-Rate Pulsed Inductive Thruster (HiPeR-PIT)

    … (HiPeR-PIT), is a low energy (∼3.8 J), planar coil, electrical propulsion concept employing a two-turn Archimedes spiral acceleration coil, and two stages of propellant pre-ionization, RF plasma discharge for the first stage, and a high frequency energy pulse through the acceleration coil for …

    washington Repository record for Diagnostics and Exploration of Current Sheet Formation in the High-Pulse-Rate Pulsed Inductive Thruster (HiPeR-PIT) (opens in a new tab)

  17. Distributed, Intelligent Edge-Sensing for a Smarter Grid

    … ‘clip-on’ current sensor based on PCB-embedded Rogowski coil has been developed. The sensor hosts a novel signal conditioning stage allowing an 'auto-tuning' feature, resulting in a universal current sensor design for measuring a wide range of currents, including faults for smart grid …

    gatech Repository record for Distributed, Intelligent Edge-Sensing for a Smarter Grid (opens in a new tab)

  18. Analysis of an Experimental Pulsed Plasma Accelerator

    … B-Dot probes; a laser interferometer; and Rogowski coils. These devices measure the time dependent current sheets, the electron number density, and the capacitor discharge current respectively.</p> <p>The B-Dot probes were an excellent source of data once the correct procedure for their …

    ut-knoxville Repository record for Analysis of an Experimental Pulsed Plasma Accelerator (opens in a new tab)

  19. Measuring bearing currents

    … will be demonstrated. For current detection a Rogowski coil, a coaxial shunt and current probes were used. The main benefit of using a remote diagnostic device is the removing the need of direct contact to the investigated object and the possible production process interruption. The early …

    chalmers Repository record for Measuring bearing currents (opens in a new tab)

  20. B-dot Probes For The Queen's Rotamak Experiment

    … measurements were verified using independent Rogowski coil data. It was determined that the rotating field coils have a field constant of 16.3 µT/A ± 0.4 µT/A and that the region ± 15 cm from the midpoint of the vacuum chamber offers fairly uniform field strength. Plasma shots have revealed …

    queens Repository record for B-dot Probes For The Queen's Rotamak Experiment (opens in a new tab)

Page 1 of 3