Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 72 for “"Roll Motion"”.
-
Optimal Feedback Control for Ship Roll Motion Under Sea States
The primary influences of ship motion are roll motion. The purpose of this dissertation is to discuss a means to reduce the roll amplitude of ship motion in the case of zero forward speed using the roll mitigation device known as the flume tank, or U-tube, tank. Passive control and active control …
-
Discomfort of seated persons exposed to low frequency lateral and roll motion
… 1 Hz which may cause vibration discomfort and motion sickness. Previous knowledge of human responses to motion is insufficient for predicting the discomfort caused by low frequencies. The objective of this thesis is to improve understanding of subjective responses to lateral and roll …
-
Analysis and Modeling of Hydrodynamic Components for Ship Roll Motion in Heavy Weather
Ship roll motion has been the subject of many studies, because of the complexities associated with this mode of ship motion, and its impact on operability, safety, and survivability. Estimation and prediction of the energy transfer and dissipation of the hydrodynamic components, added inertia and …
-
On the Statistical Correlation between the Heave, Pitch and Roll Motion of Road Transport Vehicles
… road distribution focuses only on the vertical motion of the transport vehicle as it has been shown to be the most severe. However, the pitching and rolling motions of the vehicle can contribute significant energy to the overall excitation of the vehicle and payload, and excite vibratory modes …
-
Roll motion control with a fully active suspension system: High-Level Motion Control and Low-Level Actuator Implementation
During cornering, vehicle roll motion directly affects lateral load transfer, tire force distribution, and handling consistency. This thesis therefore investigates roll-gradient shaping for a fully active suspension system in simulated cornering maneuvers and driver-in-the-loop tests, with emphasis …
-
Analysis of a single-degree-of-freedom roll motion model: simulation, sensitivity study, and comparison to multi-degree-of-freedom models.
This study models roll motion response of a barge subjected to beam sea conditions as a single degree of freedom system. The measured wave, either regular or random, is input into a computer program which uses a fourth order Runge Kutta integration method to numerically predict roll motion …
-
Experimental study on rectangular barge in beam sea
… The rectangular barge was fixed and free to roll (one degree of freedom) in a beam sea. Particle image velocimetry (PIV) was employed to measure the velocity field in the vicinity of the structure. The mean velocity and turbulence properties were obtained by phase-averaging the velocity …
-
Passive and Active Nonlinear Control of Ship Roll Motions Using U-Tube Tanks
A U-tube water tank is first designed to roll a ship floating on still water. The 6-degree of freedom (DOF) dynamic model of U-tube tank is derived and the effects of its parameters on ship roll motion are studied. Numerical simulations show that the U-tube tank is an effective stimulator to roll …
-
Prediction of Parametric Roll of Ships in Regular and Irregular Sea
… was done to develop tools to predict parametric roll motion of ships in regular and irregular sea and provide guidelines to avoid parametric roll during initial design stage. A post Panamax hull form (modified C11 Hull form, Courtesy of MARIN) was used to study parametric roll in ships. The …
-
Prediction of the Risk of Capsize of Small Ships
… analysis for assessing a potentially dangerous roll motion with a probabilistic assessment of ship performance in rough seas on a standard test-track. This represents a significant advance on previous research. A novel feature of the analysis was that prediction of the extreme capsize roll …
-
Rudder roll reduction for small ships
Roll motion on a ship can be very uncomfortable, and in the extreme, dangerous. It is possible to use the rudder to reduce roll motion as has been demonstrated by others on naval and coastguard vessels. For this study, five controllers were chosen and designed to implement a rudder roll reduction …
-
Reliability Assessment of Hull Forms Susceptible to Parametric Roll in Irregular Seas
… which makes head seas a very safe heading for roll motion stability. However, in the recent years several incidents of large amplitude roll motion in head seas have been reported which have later been attributed to parametric roll. Parametric roll motion is a phenomenon in which a ship exhibits …
-
Ship roll mode information extracted from sea trial data.
… Analysis was applied to time histories of roll motion for the Spruance class destroyer. The data was generated from sea trials conducted on a ship in 1987. The RANDEC process was applied to obtain estimates of roll- resonance modal damping and frequencies due to ship motion excitation by …
-
Estudo do movimento de balanço de um sistema com perturbação interna
The roll motion of a system with internal perturbation is investigated. The system consists of a rigid box with a pendulum fixed on the top and supported by an elastic dissipative suspension. The mathematical model is obtained by the Newtonian Mechanics. One establishes the rtability chart with …
-
Hydrodynamic Behaviour of a Floating Linkspan: A study on wave responses
… of global trade. Ro-Ro transports standing for roll-on-roll- off is a an important part of maritime transport. Ro-Ro transports is closely related to the concept of linkspan. Tide and waves can make access to quay difficult. A linkspan, as a solution is a facility to provide a good connection …
-
Roll stabilization for T-AGOS class ships
… In order to meet mission requirements, their roll motion must be reduced. Several roll damping methods appropriate for this class of ships are considered. Bilge keel stabilization is studied in more detail and various sized bilge keels are analyzed, utilizing a seakeeping prediction program, …
-
Non-linear rolling of ships in large sea waves
… model tests show a ship that is prone to extreme roll transients. This thesis examines a simple method of producing a non-linear simulation of roll motion using a tumblehome hull provided by the Office of Naval Research. This research demonstrates the significant difference that a variable …
-
A study of the desingularised boundary-element method and viscous roll damping
… and optimised method for the prediction of ship motion, and this research has two aims. The first aim was to improve an algorithm of the oscillatory problems for strip theory by means of reducing numerical integration using the desingularised method. A new way of distributing point sources was …
-
Generalized Predictive Control of Ship Coupling Motions Using Active Flume Tanks
… approach to design a control system for a ship rolling motion coupled with the sway and yaw using an activated flume tank. GPC is a strategy based on system output prediction over finite horizon known as the prediction horizon. GPC controller is designed from the coefficients of the …
-
Evaluating boom height control performance with variable boom roll damping in a suspended boom system on self-propelled sprayers
… and pests. The spraying process needed to be controlled in a manner such that the spray boom maintained the necessary target height for uniform coverage. Deviation from target height allowed outside factors such as wind to become more prevalent during chemical application which generated …
Page 1 of 4