Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 17 of 17 for “"Rolling Shear"”.

  1. Failure mechanism of rolling shear failure in cross-laminated timber

    … of CLT, which is usually referred to as the rolling shear failure. The scientific research conducted in this thesis combined both analytical modelling and experimental material testing. The stresses in CLT cross-layers obtained from a finite-element model were analyzed to differentiate …

    ubc Repository record for Failure mechanism of rolling shear failure in cross-laminated timber (opens in a new tab) Download PDF for Failure mechanism of rolling shear failure in cross-laminated timber (opens in a new tab)

  2. The consequences of wood cellular structure and rolling-shear in crossbanded veneer composites

    … plate tests. The tests showed that the shear deformations in cross veneers have a strong effect on the deflections and the strength of wood composite plates. However, the conventional theory based on Love-Kirchoff hypothesis does not take into account pronounced shear deformations of …

    aalto Repository record for The consequences of wood cellular structure and rolling-shear in crossbanded veneer composites (opens in a new tab)

  3. Duration-of-load and size effects on the rolling shear strength of cross laminated timber

    … the duration-of-load and size effects on the rolling shear strength of CLT manufactured from MPB-afflicted lumber were evaluated. The study of the duration-of-load effect on the strength properties of wood products is typically challenging; and, additional complexity exists with the …

    ubc Repository record for Duration-of-load and size effects on the rolling shear strength of cross laminated timber (opens in a new tab) Download PDF for Duration-of-load and size effects on the rolling shear strength of cross laminated timber (opens in a new tab)

  4. Rolling Shear Strength and Modulus for Various Southeastern US Wood Species using the Two-Plate Shear Test

    … Code (IBC), CLT material properties, especially rolling shear, would need to be explored. The increasing demand for softwood lumber, along with the increase of demand of CLT panel production, could place a burden and surpass the domestic softwood supply. Rolling shear is a phenomenon that occurs …

    vt Repository record for Rolling Shear Strength and Modulus for Various Southeastern US Wood Species using the Two-Plate Shear Test (opens in a new tab)

  5. Fatigue behaviour and size effect perpendicular to the grain of laminated Douglas fir veneer

    The rolling shear behaviour of laminated Douglas fir veneers was studied using specimens with 15 layers of 2.5 mm veneers. The 3 central layers were cross-plies with grain angle oriented perpendicular to the long axis of the specimen. The other layers were orthogonal to the central layers. Based on …

    ubc Repository record for Fatigue behaviour and size effect perpendicular to the grain of laminated Douglas fir veneer (opens in a new tab) Download PDF for Fatigue behaviour and size effect perpendicular to the grain of laminated Douglas fir veneer (opens in a new tab)

  6. Modeling of Mass Timber Components Subjected to Blast Loads

    … was more complex and included flexural failure, rolling shear failure, or a combined behaviour where both modes developed simultaneously. Single-degree-of-freedom (SDOF) and finite element analysis (FEA) methodologies were used to predict the behaviour in terms of displacement-time histories and …

    ottawa-retro Repository record for Modeling of Mass Timber Components Subjected to Blast Loads (opens in a new tab)

  7. Experimental Study of Shear Resistance and Failure Behavior of Reinforced and Un-reinforced Notched Cross-Laminated Timber Plates

    … aimed at gaining a deeper understanding of the shear resistance and failure modes of un-reinforced and reinforced notched Cross-Laminated Timber (CLT) plates. It addresses the limited availability of experimental data on notched CLT by exploring the structural behavior of notched CLT plates with …

    uvic Repository record for Experimental Study of Shear Resistance and Failure Behavior of Reinforced and Un-reinforced Notched Cross-Laminated Timber Plates (opens in a new tab)

  8. Next Generation CLT - Material optimisation of CLT with regard to structural performance by the introduction of air gaps in the cross-layers

    … tests on small scale test specimens, the shear capacity is determined and compared with the material reduction of the specimens. Furthermore, finite element analysis of each configuration is performed in order to predict the behaviour of the specimens and to complement the results from the …

    chalmers Repository record for Next Generation CLT - Material optimisation of CLT with regard to structural performance by the introduction of air gaps in the cross-layers (opens in a new tab)

  9. Retrofitting CLT Panels and Glulam Beams Subjected to Static and Dynamic Loads

    … including full length, localized (shear and moment regions), and U-shaped arrangements, using both unidirectional and bidirectional CFRP. According to the experimental results, CFRP fabrics significantly improved the resistance, stiffness, and ductility of the specimens. In the …

    ottawa-retro Repository record for Retrofitting CLT Panels and Glulam Beams Subjected to Static and Dynamic Loads (opens in a new tab)

  10. Experimental Methods for Understanding the Performance of Impulsively Loaded Cross-Laminated Timber Panels

    … that have remained unstudied or elusive, i.e., rolling shear failure of CLT under impulsive, blast-like loading and intermediate strain rates in CLT. A novel center-point testing system and methodology was developed that permits the application of impulsive loading in a highly controlled and …

    gatech Repository record for Experimental Methods for Understanding the Performance of Impulsively Loaded Cross-Laminated Timber Panels (opens in a new tab)

  11. Performance optimization of CLT (NextGenCLT)

    … introduction of air gaps in the cross-layers, shear and four-point bending tests were conducted on small and large samples produced in both a university workshop and a CLT factory. The experimental results were compared with FEM models created in MATLAB and ABAQUS. The study focused on …

    chalmers Repository record for Performance optimization of CLT (NextGenCLT) (opens in a new tab)

  12. Assessment of beam-to-column joint behaviour in steel-timber composite systems

    … failure modes that involve a tensile fracture, rolling shear, tear out and plug shear in timber slabs as well as yielding of steel end-plates and fasteners. The experimental results and numerical simulations show that flush end-plate STC beam to column connections have hogging bending moment and …

    unsw Repository record for Assessment of beam-to-column joint behaviour in steel-timber composite systems (opens in a new tab)

  13. The Effect of Steel Strapping Tensioning Technique and Fibre-Reinforced Polymer on the Performance of Cross-Laminated Timber Slabs Subjected to Blast Loads

    … and to promote flexural failure by preventing rolling shear failure. It also eliminated flying debris and enhanced the ultimate strength, stiffness as well as ductility. Applying GFRP layers enhanced the overall behaviour of the slab resulting in a significant increase in peak resistance, …

    ottawa-retro Repository record for The Effect of Steel Strapping Tensioning Technique and Fibre-Reinforced Polymer on the Performance of Cross-Laminated Timber Slabs Subjected to Blast Loads (opens in a new tab)

  14. Eficiência de reforços em madeira lamelada colada cruzada

    … na resistência à compressão. O cisalhamento rolling shear, delaminação e tração são os principais modos de ruptura da MLCC. Além disso, a aplicação de reforços altera o modo de falha dos elementos colados. Assim, a utilização de reforços de fibra, tanto natural quanto sintética, em MLCC …

    brazil-ufv Repository record for Eficiência de reforços em madeira lamelada colada cruzada (opens in a new tab)

  15. Strength and Serviceability Performances of Southern Yellow Pine Cross-Laminated Timber (CLT) and CLT-Glulam Composite Beam

    … performances of CLT panels in flexural and shear. The test results showed that SYP can be used to produce CLT panels that meet and exceed the product standard requirements for CLT in the North America. The results generated from the pilot study were used in the second phase of the research …

    clemson Repository record for Strength and Serviceability Performances of Southern Yellow Pine Cross-Laminated Timber (CLT) and CLT-Glulam Composite Beam (opens in a new tab)

  16. Návrh variant výroby ploché součásti z plechu s otvory

    Závěrečná práce zpracovaná v rámci bakalářského studia oboru B2307-00 předkládá návrh variant výroby ploché součásti z plechu s otvory. V projektu jsou zpracovány dvě varianty výroby jedné součásti a to: výroba na postupovém střižném nástroji a výroba pomocí CNC plazmového zařízení. Série součásti …

    brno-tech Repository record for Návrh variant výroby ploché součásti z plechu s otvory (opens in a new tab)

  17. Experimental and Numerical Investigation of the Flexural Behaviour and Effective Flange Width of Mass Timber Composite Panels

    … limited experimental guidance on practical shear connection solutions, uncertainty in predicting serviceability-level performance, and a lack of validated methods for accounting for shear lag and effective flange width (EFW) in the CLT flanges. Existing research has primarily focused on …

    waterloo Repository record for Experimental and Numerical Investigation of the Flexural Behaviour and Effective Flange Width of Mass Timber Composite Panels (opens in a new tab)