Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 24 for “"Roof Support"”.

  1. Adapting Roof Support Methods for Anchoring Satellites on Asteroids

    … and lander anchors by drawing on existing roof bolt technology. This study compared the behavior of tensioned point anchor and untensioned fully-grouted roof bolts with a polyurethane-anchored bolt under environmental conditions similar to those anticipated in space. These conditions …

    wvu Repository record for Adapting Roof Support Methods for Anchoring Satellites on Asteroids (opens in a new tab)

  2. Using Geopolymerization Technology to Develop High Performance Pumpable Roof Support Cementitious Material and to Recycle Mine Tailings

    … aims to develop high performance pumpable roof support cementitious material and to recycle mine tailings (MT) through geopolymerization technology. First, a systematic study on the incorporation of ordinary Portland cement (OPC) to adjust/improve the workability, setting time, and …

    arizona-thes Repository record for Using Geopolymerization Technology to Develop High Performance Pumpable Roof Support Cementitious Material and to Recycle Mine Tailings (opens in a new tab)

  3. Some factors in the use of roof bolts for mine roof control

    … of stresses often time cause catastrophic roof-falls which kill and injure miners and damage equipment. Attempts are made to control these unbalanced stresses by choosing the proper method of mining and suitable method of roof support. About 20 years ago, the St. Joseph Lead Company in …

    vt Repository record for Some factors in the use of roof bolts for mine roof control (opens in a new tab)

  4. Optimizing roof control using probabilistic techniques in roof failure prediction

    … underground mine is the reliable prediction of roof falls' size, frequency and location. Probabilistic simulation of potential roof control problems allows a designer to test the performance of competing mine layouts against assumed roof conditions. By comparing different roof control plans …

    vt Repository record for Optimizing roof control using probabilistic techniques in roof failure prediction (opens in a new tab)

  5. Evaluation of underground supports made of wood and other materials

    A roof support system is one of the most important systems in underground mining. It may consist of various types of supports such as props, cribs, steel arches, powered supports and roof bolts, among others. In this research, powered supports and roof bolting are not included. Evaluation of …

    vt Repository record for Evaluation of underground supports made of wood and other materials (opens in a new tab)

  6. Investigation of signing to reduce conflicts between pedestrians and turning vehicles at signalized intersections

    … to the field of vision caused by the front-left roof-support (A-pillar) during a left-turn maneuver was found to have the potential to cover a substantial portion of the crosswalk creating a blind zone, especially during a left-turn maneuver from a two-way street. The front-right roof-support …

    nebraska Repository record for Investigation of signing to reduce conflicts between pedestrians and turning vehicles at signalized intersections (opens in a new tab)

  7. Geologic feature prediction using roof bolter drilling parameters

    The design of a safe and efficient roof support system is essential for any underground coal mining operation. All underground coal mines in the United States install roof bolts with a roof bolter as the primary means of supporting the mine roof. Proper application of roof bolting is dependent upon …

    wvu Repository record for Geologic feature prediction using roof bolter drilling parameters (opens in a new tab)

  8. A methodology for determining the character of mine roof rocks.

    … safely control the surrounding rock mass, with support of the roof rocks being of the greatest concern. Primary roof support systems use mechanical structures, such as roof bolts, roof trusses and cable bolts, to stiffen and control the roof rocks. Each of these systems requires the drilling of …

    wvu Repository record for A methodology for determining the character of mine roof rocks. (opens in a new tab)

  9. Mississippian Architecture: Temporal, Technological, and Spatial Patterning of Structures at the Toqua Site (40M R6)

    … had continuous elements making up both walls and roof. A later rigid form of building construction use separate components for walls, roof, and roof support system.</p> <p>Study of structure size, form, proportion, elaboration, content, and location provided information concerning structure …

    ut-knoxville Repository record for Mississippian Architecture: Temporal, Technological, and Spatial Patterning of Structures at the Toqua Site (40M R6) (opens in a new tab)

  10. Design criteria for tensioned point-anchored resin-assisted roof bolt systems.

    Roof bolting is now the primary means of roof support in mines. Further, the beam building mechanism is now believed to be the primary mechanism by which roof bolts work. This statement particularly holds true for laminated roof strata. With beam building, the roof strata is reinforced by the …

    wvu Repository record for Design criteria for tensioned point-anchored resin-assisted roof bolt systems. (opens in a new tab)

  11. Ground control support consideration for pre-driven longwall recovery rooms.

    … current coal panel. The entry is developed and supported ahead of time so that the required combinations of standing and internal supports can be installed before the longwall face approaches. The combination of the internal bolting system and the standing concrete supports are critical for the …

    wvu Repository record for Ground control support consideration for pre-driven longwall recovery rooms. (opens in a new tab)

  12. Stochastic availability analysis and modeling of longwall mining operations

    … four subsystems: coal—cutting, face—conveying, roof—support, and outby—haulage. The operating characteristics of the longwall system are then investigated based on the system configuration, component failure and repair processes, and rules of operation. Through use of the techniques of …

    vt Repository record for Stochastic availability analysis and modeling of longwall mining operations (opens in a new tab)

  13. Investigation of Stress Corrosion Cracking in Underground Coal Mines

    Rock bolts and cable bolts are widely used as roof support systems in underground mines. Over the last two decades there have been increasing reports of failure of rock bolts and, more recently, cable bolts. While rock bolt failure has been studied extensively, no study has been made previously of …

    unsw Repository record for Investigation of Stress Corrosion Cracking in Underground Coal Mines (opens in a new tab)

  14. Size effect and anisotropy on the strength of shale under compressive stress conditions

    … Appalachian region report the highest rate of roof falls in the United States. The immediate roof of these mines is mostly composed of shale. The in-situ strength of shale is necessary for designing roof support to prevent roof falls. Estimating the in-situ strength of shale requires the …

    wvu Repository record for Size effect and anisotropy on the strength of shale under compressive stress conditions (opens in a new tab)

  15. Integrated Large Discontinuity Factor, Lamodel and Stability Mapping Approach for Stone Mine Pillar Stability

    … to guide the industry in designing pillar and roof support. These guidelines emphasize the impact of large, angular discontinuities on pillar strength. Esterhuizen et al. (2011) derived the large discontinuity factor (LDF) to account for the impact of discontinuities on pillar stability by …

    wvu Repository record for Integrated Large Discontinuity Factor, Lamodel and Stability Mapping Approach for Stone Mine Pillar Stability (opens in a new tab)

  16. Improving Real-time Methane Monitoring in Longwall Coal Mines Through System Response Characterization of a Multi-Nodal Methane Detection Network

    … to be easily integrated within the current roof support equipment of the mine. Each unit contains an array of sensors used to continuously monitor the environmental conditions which include methane concentration, temperature, pressure, and relative humidity. All MWS units report information …

    wvu Repository record for Improving Real-time Methane Monitoring in Longwall Coal Mines Through System Response Characterization of a Multi-Nodal Methane Detection Network (opens in a new tab)

  17. Longwall weighting events at Phalen Colliery, Nova Scotia, Canada

    … by high convergence rates within the powered supports which maintain roof stability along the longwall face. Rapid convergence is induced by ground pressures that exceed the load capacity of the supports, and forces them to yield. A weighting event need not necessarily impact the mining …

    wvu Repository record for Longwall weighting events at Phalen Colliery, Nova Scotia, Canada (opens in a new tab)

  18. Investigation of Geomechanical Behavior of Laminated Rock Mass Through Experimental and Numerical Approach

    Roof failure in the Appalachian underground coal fields occurs often in laminated shale. Laminated shale roof in coal mines fails in unique ways, such as cutter failure or delamination failure. Extensive studies have investigated the influential factors that cause laminated roof failure, which …

    wvu Repository record for Investigation of Geomechanical Behavior of Laminated Rock Mass Through Experimental and Numerical Approach (opens in a new tab)

Page 1 of 2