Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 20 for “"Roof stability"”.
-
Assessment of Roof Stability in a Room and Pillar Coal Mine in the U.S. Using Three-Dimensional Distinct Element Method
Roof falls and accumulation of dangerous gasses are the most common hazards in any underground coal mine. Different mechanisms can jeopardize the stability of the roof in underground excavations and successful roof control can only be obtained if the failure mechanism is identified and understood …
-
Interface Behavior of Water Saturated Limestone Rock Joints Using Hollow Cylinder Testing and A Case History Regarding Mine Roof Stability: Fort Hartford Mine Superfund Site
… <p>Part III is a case history regarding mine roof stability at the Fort Hartford Mine Superfund Site in Olaton, Kentucky. Specifically, mine roof instability at the Fort Hartford Mine Superfund Site has a number of potentially detrimental consequences including risks to mine personnel, …
-
Factors predictive of roof instability in addition to the existing CMRR criteria at two case study coal mines
Roof falls remain one of the greatest hazards facing underground coal miners (Barczak et al., 2000; Razani et al., 2013; Oraee et al., 2016). In 2017 there were 91 lost-time injuries from roof falls (in US underground coal mines). A further 48 roof falls were reported in US underground coal mines …
-
Two-dimensional numerical simulation and design of fully grouted bolts for underground coal mines.
… It occupied the greatest portion of the annual roof bolt consumption in the U.S. There are three components of the fully grouted bolt; steel rebar (bolt), resin annulus, and rock/grout interaction. Fully grouted bolts are loaded in three ways: axial load, shear load and bending moment. Moreover, …
-
Stability assessment of entry roofs in underlying multiple seam mines
Entry roofs in underlying multiple seam mines are vulnerable to failure under the influence of stress transferred from the upper seam workings. Overburden depth, innerburden thickness, percentage of hard rock in the innerburden and relative location of pillars in the two seams are some of the …
-
Investigation of roof shales in Illinois Coal Mines
… physical properties and the performance of roof shales in Illinois coal mines. The study included cataloging the physical and mineralogical properties of typical roof shales, determining the interrelationships of the properties and defining the factors in the rock which effect deterioration. …
-
Geologic and geotechnical controls on the stability of coal mine entries
Roof and rib failures in underground coal mines are one of the major problems facing the industry today. In addition to safety considerations, the resulting economic impact of such failures is staggering. Uncovering and replacing buried and damaged equipment and clearing entries can account for a …
-
Investigation of Geomechanical Behavior of Laminated Rock Mass Through Experimental and Numerical Approach
Roof failure in the Appalachian underground coal fields occurs often in laminated shale. Laminated shale roof in coal mines fails in unique ways, such as cutter failure or delamination failure. Extensive studies have investigated the influential factors that cause laminated roof failure, which …
-
Integrated stability mapping system for mines
The Integrated Stability Mapping System (ISMS) was developed as an engineering tool to quantify the geologic and geo-mechanical information of mines, and to integrate the critical stability influence factors into an overall stability index for use in mine planning and support design. It is …
-
Three-dimensional numerical simulation and design of tensioned roof bolting for underground coal mines.
… believed to be effective for certain types of roof strata. A 3-D finite element model using ABAQUS has been developed for the tensioned bolting design. In this model, the physical process of the tensioned bolting including entry excavation sequence, roof bolting components, bolt installation …
-
Longwall weighting events at Phalen Colliery, Nova Scotia, Canada
… rates within the powered supports which maintain roof stability along the longwall face. Rapid convergence is induced by ground pressures that exceed the load capacity of the supports, and forces them to yield. A weighting event need not necessarily impact the mining process negatively, but …
-
Stress analysis in longwall entry roof under high horizontal stress
… longwall mining. It can significantly affect the stability of the panel entry system in both the development and mining periods. Many roof problems have been contributed to high horizontal stress, especially when the immediate roof is weak, or thinly bedded.;In this research, the stress …
-
Multi-Scale Characterization of Mining-Induced Deformation Using Radar
… excavation can produce fractures that reduce roof stability and surface deformation that may affect mine-related or public infrastructure. However, these responses are difficult to characterize because fractures are concealed within the rock mass and surface deformation may extend across large …
-
Apparent Stress Estimates of Seismic Events Associated with Underground Mining Operations in Sedimentary Rock Units: Implications for Improving Underground Roof Collapse Warning Systems
… at the two mines to evaluate the potential for roof failure based on the temporal and spatial distribution of the seismic activity. In an earlier study, the roof failures at the two underground mine locations were found to be the result of two distinct failure processes, both of which were …
-
Feasibility Study of a Continuous Borer-Bolter in an Underground Potash Mine
… anomalous. These areas can result in reduced stability from what would normally be found in the typical geological conditions. Potash mines install rock bolts in anomalous ground conditions to counter this. This is currently done using two different machines and results in a lot of down time …
-
Influence of cutting sequence and time effects on cutters and roof falls in underground coal mine -- numerical approach
Roof falls are among the most serious safety hazards faced by underground coal mines worldwide. Due to the stringent safety measures and development of the innovative support systems in the past few decades, their numbers were drastically reduced but have not been eliminated. Underground …
-
Stability Assessment of Salt Cavern Roof Beam for Compressed Air Energy Storage in South-Western Ontario
… In the case of an underground storage system, stability and serviceability of the storage cavern must be investigated using geomechanical models. Geomechanical issues may cause serious damage to the cavern, which could stop the system from functioning. The stability of the cavern roof layer has …
-
Structural features of coal measures of the Kootenay formation, southeastern Canadian Rocky Mountains
… underground mines the structural features of the roof rock and the coal seams have a pronounced effect on roof stability.. In the Vicary Creek mine, located in the hanging wall of the Coleman Fault, the Number 2 seam and some of the roof rock were pervasively sheared as a result of interstratal …
-
Geomechanical behaviour of laminated, weak roof strata and development of an appropriate reinforcement strategy
… of the geomechanical behaviour of laminated weak roof strata along longwall roadways in underground coal mines and the mechanisms for effective reinforcement. Field investigations have been particularly associated with underground conditions at Angus Place Colliery, New South Wales, Australia. The …
-
Comparative geomechanical investigation of empirical, analytical, and numerical methods utilized in designing flat-roof excavations in discontinuous and laminated rockmasses
… often employed in the design of flat-roof excavations: assuming that the overburden has no self-supporting capacity, and representing discontinuous systems as continua. To that end, this research utilizes the explicit discrete element method (DEM) to identify and account for the …