Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 29 for “"Rotating blade"”.

  1. Ablative pyrolysis of biomass

    … at 500°C. The constructed reactor utilised a rotating blade approach to achieve particle ablation in a 258mm internal diameter reactor. By fulfilling the key requirements of high relative motion and high contact pressure, pine wood particles of maximum size 6.35 mm were successfully …

    aston Download PDF for Ablative pyrolysis of biomass (opens in a new tab)

  2. Radial flow effects on a retreating rotor blade

    … aerodynamic phenomena occurring on a retreating blade with a focus on dynamic stall and reverse flow as applied to both a helicopter rotor in forward flight and a wind turbine operating at a yaw angle. While great progress has been made in understanding the phenomenon of two-dimensional dynamic …

    gatech Repository record for Radial flow effects on a retreating rotor blade (opens in a new tab)

  3. Development of an extremely flexible, variable-diameter rotor for a micro-helicopter

    … rotor featuring extremely flexible, retractable blades. These rotor blades are composed of a flexible matrix composite material; they are so flexible that they can be rolled up and stowed in the rotor hub. The motivation for this study is to equip the next generation of unmanned rotary-wing …

    texas Repository record for Development of an extremely flexible, variable-diameter rotor for a micro-helicopter (opens in a new tab)

  4. Numerical Study of the Stability of Embedded Supersonic Compressor Stages

    … boundary condition between adjacent, relatively-rotating blade rows. A steady, five-blade-row, numerical simulation using the Baldwin-Lomax turbulence model was performed, creating several constant speed lines. The results are presented, highlighting the role shock structure plays in the …

    vt Repository record for Numerical Study of the Stability of Embedded Supersonic Compressor Stages (opens in a new tab)

  5. Vibrational analysis of vertical axis wind turbine blades

    … vibration model for a vertical axis wind turbineblade. This model accommodates the aects of varying relative ow angle caused by rotatingthe blade in the ow eld, uses a simple aerodynamic model that assumes constant windspeed and constant rotation rate, and neglects the disturbance of wind due to …

    msu Repository record for Vibrational analysis of vertical axis wind turbine blades (opens in a new tab)

  6. Investigation and characterisation of the wear mechanisms of abradable compressor linings

    … and unbalanced parts lead to contact between the rotating blade and the abradable lining of the surrounding casing. Observation of aero-engine service has highlighted undesirable issues and relative wear mechanisms that have created problems during operation, with significant reductions in …

    whiterose Download PDF for Investigation and characterisation of the wear mechanisms of abradable compressor linings (opens in a new tab)

  7. Idling and cutting vibration characteristics of guided circular saws

    … presented first by numerical investigation of rotating disks and then by conducting idling and cutting experimental tests of splined saws with different guide configurations. For the numerical investigations, the governing linear equation of transverse vibration of a rotating disk is used. As a …

    ubc Repository record for Idling and cutting vibration characteristics of guided circular saws (opens in a new tab) Download PDF for Idling and cutting vibration characteristics of guided circular saws (opens in a new tab)

  8. Correlation-based Transition Modeling for External Aerodynamic Flows

    … transition model is successfully applied to rotating blade configurations in axial flow conditions to study the effects of transitional boundary layers on rotor thrust and torque. In helicopter rotors, inclusion of transition effects increased thrust prediction by 2% and decreased torque by …

    maryland Repository record for Correlation-based Transition Modeling for External Aerodynamic Flows (opens in a new tab)

  9. Modeling Analysis and Control of Nonlinear Aeroelastic Systems

    Airplane wings, turbine blades and other structures subjected to air or water flows, can undergo motions depending on their flexibility. As such, the performance of these systems depends strongly on their geometry and material properties. Of particular importance is the contribution of different …

    vt Repository record for Modeling Analysis and Control of Nonlinear Aeroelastic Systems (opens in a new tab)

  10. Numerical Study of Trailing Edge Flow Control for Horizontal Axis Wind Turbines

    … Deploying effective flow control devices on the blades could either increase loads at off-design wind speed conditions or reduce the extreme loads, leading to either higher energy output or a more stable energy output from the wind turbine. This study reports a research into the performance of …

    whiterose Download PDF for Numerical Study of Trailing Edge Flow Control for Horizontal Axis Wind Turbines (opens in a new tab)

  11. Reduced-order modeling of mistuned bladed disks with geometric and contact nonlinearities

    … methodology to study the dynamics of mistuned bladed disks with geometric and contact nonlinearities in a numerically efficient way. The methodology is based on a reduction procedure. This allows to overcome the difficulties related to the high computational costs of nonlinear dynamic …

    liege Repository record for Reduced-order modeling of mistuned bladed disks with geometric and contact nonlinearities (opens in a new tab) Download PDF for Reduced-order modeling of mistuned bladed disks with geometric and contact nonlinearities (opens in a new tab)

  12. Estimation of helicopter rotor loads from blade structural response

    … the load distribution along a helicopter rotor blade has been one of the most challenging tasks in experimental aeromechanics. Conventional loads measurements with on-blade instrumentation, such as pressure transducers for airloads and strain gages for structural loads, require the …

    texas Repository record for Estimation of helicopter rotor loads from blade structural response (opens in a new tab)

  13. Mechanisms and Identification of Unsteady Separation Development and Remediation

    … the complex flow phenomena over wind turbine blades during stall development, a scaled three-dimensional non-rotating blade model is designed to be dynamically similar to a rotating full-scale NREL 5MW wind turbine blade. A time-resolved particle image velocimetry (PIV) investigation of flow …

    portland-state Repository record for Mechanisms and Identification of Unsteady Separation Development and Remediation (opens in a new tab)

  14. Heat Transfer Analysis of Cooling Channels with the Blade-shaped Feature

    This dissertation features rotating, blade-shaped, two-pass cooling channels with varying aspect ratio (AR) under various operating and surface conditions. The cooling channels in turbine blades have variation in cross-section and orientation with respect to rotation to maximize the cooling space …

    tamu Repository record for Heat Transfer Analysis of Cooling Channels with the Blade-shaped Feature (opens in a new tab)

  15. The generation of transverse and longitudinal vortices in low speed wind tunnels

    … The longitudinal vortex system is that of a co-rotating vortex pair which, if substituted for a classical single tip vortex, may produce a beneficial modification to Blade Vortex Interaction. The transverse vortex mimics the tip vortex of a typical helicopter rotor and may be used to assess its …

    glasgow Download PDF for The generation of transverse and longitudinal vortices in low speed wind tunnels (opens in a new tab)

  16. CFD analysis of 3D dynamic stall

    … dictated by the stall characteristics of the blade. Stall under dynamic conditions (Dynamic Stall) is the dominant phenomenon encountered on heavily loaded fast-flying rotors, resulting in an extra lift and excessive pitching moments. Dynamic stall (DS) can be idealised as the pitching motion …

    glasgow Download PDF for CFD analysis of 3D dynamic stall (opens in a new tab)

  17. Wear Performance Evaluation of Abradable Coatings: A Tribological Investigation and Development of an Abradable Test Rig

    … coatings, applied to minimize the gap between rotating blade tips and stationary casings, reduce compressed air leakage, enhance operational safety, and lower fuel consumption, CO₂, and NOₓ emissions. In low-pressure compressor (LPC) applications, thermally sprayed aluminum–silicon (AlSi) …

    concordia Download PDF for Wear Performance Evaluation of Abradable Coatings: A Tribological Investigation and Development of an Abradable Test Rig (opens in a new tab)

  18. Simplified Dynamic Models for Modern Flying Vehicles

    … Similarly, unsteady aerodynamic effects over a rotating blade are modeled by means of an available approach, namely the ONERA dynamic stall model. Some reasonable simplifying assumptions based on the comparison of simulation results with a quasi–static aerodynamic model are then derived and a …

    poli-torino Repository record for Simplified Dynamic Models for Modern Flying Vehicles (opens in a new tab)

  19. Film cooling effectiveness measurements on rotating and non-rotating turbine components

    … distributions were measured on the stationary blade tip and on the leading edge region of a rotating blade using a Pressure Sensitive Paint technique. Air and nitrogen gas were used as the film cooling gases and the oxygen concentration distribution for each case was measured. The film cooling …

    tamu Repository record for Film cooling effectiveness measurements on rotating and non-rotating turbine components (opens in a new tab)

Page 1 of 2