Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 25 for “"Rotational Molding"”.

  1. Simulation of rotational molding

    … program is written in FORTRAN IV to simulate the Rotational Molding process based on the discrete technique suggested by Progelhof and Throne. This program employs three techniques of Finite Difference, Euler's, Crank Nicolson's, and pure implicit, with their inherent accuracy and cost limits. The …

    njit Repository record for Simulation of rotational molding (opens in a new tab)

  2. Sustainability in Rotational Molding: Influence of Additives

    Rotational molding is a polymer processing technique uniquely able to produce large hollow parts while maintaining structural integrity. This benefit comes with a significant drawback: large amounts of plastic waste when a part is defective. The present study aims to investigate the feasibility of …

    mcmaster Repository record for Sustainability in Rotational Molding: Influence of Additives (opens in a new tab)

  3. Polymer melt formation and densification in rotational molding

    … is a situation encountered in processes such as rotational molding and powder coating. The present work focuses on the study of the transformation of a loosely packed, low density powder compact, to a fully densified polymer part, when processed at temperatures above the melting (or glass …

    mcmaster Repository record for Polymer melt formation and densification in rotational molding (opens in a new tab)

  4. Polymer sintering and its role in rotational molding

    … is a fundamental phenomenon in processes such as rotational molding and powder coating. Rotational molding uses plastic powder to produce hollow plastic parts. The porosity of the final part produced in rotational molding depends on the completion of polymer sintering and the removal of bubbles. …

    mcmaster Repository record for Polymer sintering and its role in rotational molding (opens in a new tab)

  5. Development of a Particle Flow Test for Rotational Molding

    … qualify resin for use in production in the rotomolding process has been shown to have many flaws in both equipment and procedure. Research was done here to investigate a possible alternative that could eliminate some of these testing deficiencies. By reducing equipment and operator errors, the …

    byu Repository record for Development of a Particle Flow Test for Rotational Molding (opens in a new tab) Download PDF for Development of a Particle Flow Test for Rotational Molding (opens in a new tab)

  6. Rotational Molding of Acrylonitrile-Butadiene-Styrene Polymers and Blends

    … (ABS) resins for use in rotational molding would provide a medium performance material, thus opening doors to new markets for the rotational molding industry. Unfortunately, ABS resins have shown serious problems during the rotational molding process, namely discoloration, …

    byu Repository record for Rotational Molding of Acrylonitrile-Butadiene-Styrene Polymers and Blends (opens in a new tab) Download PDF for Rotational Molding of Acrylonitrile-Butadiene-Styrene Polymers and Blends (opens in a new tab)

  7. Selection of Thermotropic Liquid Crystalline Polymers for Rotational Molding

    … for use in the storage of cryogenic fluids. Rotational molding was selected as the processing method for these containers because it is convenient for manufacturing large storage vessels from thermoplastics. Unfortunately, there are no reports of successful TLCP rotational molding in the …

    vt Repository record for Selection of Thermotropic Liquid Crystalline Polymers for Rotational Molding (opens in a new tab)

  8. Thermal Models and Energy Saving Strategies for Rotational Molding Operations

    Transient heat transfer phenomena in the rotational molding of plastic parts are modeled in this study. Natural convection and radiation from the furnace and flue gases to the mold housing are analyzed. Other models include transient heat transfer through the mold, single-phase conduction through …

    gatech Repository record for Thermal Models and Energy Saving Strategies for Rotational Molding Operations (opens in a new tab)

  9. An analysis of the heating and densification process during rotational molding of a thermoplastic powder in a uniaxially rotating cylindrical cavity

    … of the heating and densification portion of the rotational molding process in a uniaxial, cylindrical mold. A thorough literature survey is included which reviewed past analysis of the rotational molding process and other areas that assisted in understanding of the process. The results presented …

    njit Repository record for An analysis of the heating and densification process during rotational molding of a thermoplastic powder in a uniaxially rotating cylindrical cavity (opens in a new tab)

  10. Design, development and experimental validation of a lab-scale system for rapid rotational molding of functionally graded integral-skin cellular polyethylene composites

    … originally developed for a patented Rapid Rotational Foam Molding (RRFM) process, was re-designed, built, and its functionality was successfully experimentally verified. The primary objective of the research work presented in this thesis was to provide the physical means to introduce a …

    uoit Repository record for Design, development and experimental validation of a lab-scale system for rapid rotational molding of functionally graded integral-skin cellular polyethylene composites (opens in a new tab)

  11. Survey of Methods for Achieving Low Gasoline Fuel-Permeation in Rotationally-Molded Articles

    … processes by which to meet such requirements. Rotational molding is a common processing choice for fuel containers given its ability to produce complex, hollow geometries with consistent wall thickness. A number of strategies have been devised for meeting fuel permeation requirements in …

    ndsu Repository record for Survey of Methods for Achieving Low Gasoline Fuel-Permeation in Rotationally-Molded Articles (opens in a new tab)

  12. Selected topics in viscous flow: Coating flow with rotation

    This thesis consists of two parts concerning rotational molding and spin coating, respectively. Both parts consider coating flows which have relevance to industrial applications. The main theme of the thesis is to make appropriate simplifications to the mathematical descriptions of the flows in …

    uiuc Repository record for Selected topics in viscous flow: Coating flow with rotation (opens in a new tab)

  13. Nonlinear Ultrasonics for In-line Quality Monitoring of Polymer Processing Methods

    … tool was developed and applied to a batch rotational molding process. Multiple traditional quality measurements were correlated with the ultrasonic signal using multivariate statistical analysis. Finally, an in-line statistical approach for quality classification and an on-line process …

    mcmaster Repository record for Nonlinear Ultrasonics for In-line Quality Monitoring of Polymer Processing Methods (opens in a new tab)

  14. Data-Driven Modelling and Control of Batch Processes

    … initially developed and implemented on a batch Rotational Molding process to achieve product specifications through constraints on the predicted quality variables, while either minimizing the total input consumption or further maximizing the product quality. A Linear Time-Invariant (LTI) State …

    mcmaster Repository record for Data-Driven Modelling and Control of Batch Processes (opens in a new tab)

  15. Effects of fiber content and extrusion parameters on the properties of flax fiber - polyethylene composites

    … and separation of fiber from the polymer during rotational molding, which consequently affect the mechanical and physical properties of the resulting composites. Using triethoxyvinylsilane as chemical pre-treatment on flax fibers and linear low density polyethylene (LLDPE) and high density …

    sask Repository record for Effects of fiber content and extrusion parameters on the properties of flax fiber - polyethylene composites (opens in a new tab)

  16. EXPERIMENTAL AND NUMERICAL STUDIES OF BUBBLE DEVELOPMENT PROCESS IN ROTATIONAL FOAM MOLDING

    … non-pressurized conditions as applicable to rotational molding to elucidate the underlying mechanisms in the bubble transformation process and provide an accurate basis for predicting the morphological structure and macroscopic properties of the foamed materials. It was found that the foaming …

    mcmaster Repository record for EXPERIMENTAL AND NUMERICAL STUDIES OF BUBBLE DEVELOPMENT PROCESS IN ROTATIONAL FOAM MOLDING (opens in a new tab)

  17. Gas atomization of high molecular weight polymers: feasibility studies and process development

    … of the powders include uses as raw materials for rotational molding, powder spray coating, and for low cost thermoplastic composites and polymer alloys.</p>

    iastate Repository record for Gas atomization of high molecular weight polymers: feasibility studies and process development (opens in a new tab)

  18. Mechanical, Rheological and Thermal Properties of Polyethylene (PE)/Clay Nanocomposite for Rotomolded Containers

    … (PE) is widely used to make bulk containers via rotational molding process. Adding 2 wt % and 4 wt % organo-modified clay improved the thermal, barrier and mechanical properties of PE. Clay layers create a tortuous path against the permeant, yielding better barrier properties. Due to the …

    calgary Repository record for Mechanical, Rheological and Thermal Properties of Polyethylene (PE)/Clay Nanocomposite for Rotomolded Containers (opens in a new tab)

  19. A Study of the Cause of Failure of Rotationally Molded, High-Density Polyethylene, Sodium Hypochlorite Storage Tanks

    The topic of chemical oxidative degradation in rotational molded polyethylene (high-density cross-linked) chemical (sodium hypochlorite) storage tanks is an industry problem that ranks at the top of current business issues for manufacturers of chemical storage tanks. The degradation of these tanks …

    byu Repository record for A Study of the Cause of Failure of Rotationally Molded, High-Density Polyethylene, Sodium Hypochlorite Storage Tanks (opens in a new tab) Download PDF for A Study of the Cause of Failure of Rotationally Molded, High-Density Polyethylene, Sodium Hypochlorite Storage Tanks (opens in a new tab)

  20. Toward Sustainable Antifouling: Experimental and Environmental Assessment of Embedded Antimicrobials in Polymeric Marine Systems

    … available silver-aluminum alloy. Using rotational molding techniques and static ocean submersion testing in high-biofouling waters, the study evaluated microbial resistance, biofouling growth rate, and economic feasibility. Results showed that embedded systems can significantly reduce …

    ttu Repository record for Toward Sustainable Antifouling: Experimental and Environmental Assessment of Embedded Antimicrobials in Polymeric Marine Systems (opens in a new tab)

Page 1 of 2