Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 13 of 13 for “"Rotor faults"”.
-
On-line condition monitoring and detection of stator and rotor faults in induction motors.
… motor in order to determine the types of faults and their severity while the motor is under a normal operating condition. The work in this thesis investigates the detection of stator and rotor faults (i.e. shorted turn faults, eccentricity faults, and broken rotor bar faults) using three …
-
Separating Load Torque Oscillation and Rotor Faults in Stator Current Based-Induction Motor Condition Monitoring
… analysis techniques are usually used to detect rotor faults in induction machines. Magnetic field anomalies in the airgap due to the rotor faults result in characteristic side-band harmonic components in the stator current spectrum, which can be measured as rotor fault signatures. A …
-
Detection of Rotor and Load Faults in BLDC Motors Operating Under Stationary and Non-Stationary Conditions
… of this research is to advance the field of rotor and load fault diagnosis in BLDC machines operating in a variety of operating conditions ranging from constant speed to continuous transient operation. This objective is addressed as three parts in this research. The first part experimentally …
-
Analysis, Modeling, and Diagnostics of Adjacent and Nonadjacent Broken Rotor Bars in Squirrel-Cage Induction Machines
In this thesis, faults associated with squirrel-cage rotor structures will be considered. More specifically, diagnostics of adjacent and nonadjacent squirrel-cage rotor bar breakages will be addressed. Effects of such faults on machine performance will be studied through a number of modeling …
-
Bounded-Time Detection and Recovery from Faults in Large-Scale, Distributed Cyber-Physical Systems
… critical applications and others are subject to faults; that is, components in the system can experience failure due to software bugs, broken actuators, miscalibrated sensors, or even adversarial attacks. Damages caused by many faults in CPS have immediate, real-world consequences. For instance, …
-
Fault detection and model-based diagnostics in nonlinear dynamic systems
… Dynamic model of rolling element bearings with faults were developed using vector bond graphs. The model incorporates gyroscopic and centrifugal effects, contact deflections and forces, contact slip and separations, and localized faults. Dents and pits on inner race, outer race and balls were …
-
Towards Sample- and Compute-Efficient Condition Monitoring of Induction Machines
… fail under high stress levels, with bearing and rotor faults accounting for most breakdowns. Condition monitoring (CM) mitigates the risks caused by undetected faults by assessing machine health through physical signal analysis. Methods are either model-based, relying on simulations, or …
-
Low-cost motor drive embedded fault diagnosis systems
… in industrial manufacturing plants. Bearing faults, insulation faults, and rotor faults are the major causes of electric motor failures. Based on the line current analysis, this dissertation mainly deals with the low cost incipient fault detection of inverter-fed driven motors. Basically, low …
-
Condition Monitoring and Fault Diagnosis of Induction Machine Using Artificial Intelligence Methods and Empirical Mode Decomposition
… asymmetries and vibrations due to machine faults. Hence, this project focuses on two fault detection techniques, namely, vibration signature and MCSA. There are a number of issues to address in the formulation of a reliable fault detection and diagnosis scheme: 1. definition of a single …
-
An investigation of shaft current in a large sleeve bearing induction machine
… of the stator current to determine stator and rotor faults in alternating current machines. The Rogowski coil method can be used as an alternative on-line monitoring system for such faults.</p>
-
Modelling, fault detection and active vibration control of rotor dynamic systems with applications in machine tools
Rotors are extensively used to transfer energy from one part to other parts of a mechanical system. During the service life of the rotors, they are subjected to different faults like the rotor crack, coupling misalignment, rotor bow, rotor-stator rubbing and unbalance. One of the important aspects …
-
Δυναμική ανάλυση και ανάπτυξη μεθόδων διάγνωσης σφαλμάτωνελεγχόμενου κινητήριου συστήματος αποτελούμενου από ασύγχρονη μηχανή δακτυλιοφόρου δρομέα και ηλεκτρονικούς μετατροπείς ισχύος
… a power electronic converter connected to the rotor circuit is carried out. This drive is referred to as “subsynchronous cascade drive” or “slip energy recovery drive” in the literature. The investigation is carried out via simulations in Matlab/Simulink of a 4 MW drive installed in a Greek …