Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 119 for “"RuO2"”.
-
Hydrodeoxygenation mechanism of Acetaldehyde on Ru(0001), RuO2(110), and RuO2/TiO2(110) from first-principles investigations
… oxygenates in bio-oil, is explored on Ru(0001), RuO2(110), and a RuO2/TiO2(110) overlayer surface using periodic density functional theory. Under typical HDO reaction conditions, the oxide surfaces are partially reduced and have bridging hydroxyls. Upon additional hydrogen adsorption, these …
-
Atomic-Scale Structure and Catalytic Reactivity of RuO2
… phases on Ru(0001) and Ru(100) and the bulk RuO2(101) surface were studied by quantitative LEED I/E analysis, TDS and AES. On Ru(0001), the (2´ 2)-3O phase forms at an O coverage of 0.75 ML. The atomic structure of this phase turned out to be a (2´ 2) vacancy structure of a (1´ 1)-O network …
-
Φωτοκαταλυτική διάσπαση του νερού σε καταλύτες Pt-RuO2/TiO2
THE PHOTOCATALYTIC CLEAVAGE OF WATER OVER PT-RUO2/TIO2 CATALYSTS UNDER ILLUMINATION IN THE NEAR UV REGION IS INVESTIGATED IN A BATCH AND IN A SEMICONTINUOUS FLOW PHOTOREACTOR CELL. IT IS SHOWN THAT THE RATE OF H2 PRODUCTION DEPENDS ON RUO2 LOADING, ON THE ANATASE CONTENT OF TIO2 EXHIBITS A WEAK …
-
A Structural Study of the Lithium Intercalates of RuO2, IrO2, and OsO2
… in the formation of the orthorhombic phases Li0.9RuO2 and Li0.9IrO2, respectively. The orthorhombic cells of the intercalation products are related to the tetragonal transition metal dioxide cells by a large expansion (~ 0.5 Å) in the [100] and [010] directions and a smaller contraction (~ 0.3 Å …
-
Decoupling the Mechanistic Effects of CeO2-x-Based Catalytic Heterojunctions: Chemisorbed MoO3 vs Physisorbed RuO2
… of bulk CeO2-x as well as MoO3-CeO2-x and RuO2-CeO2-x heterojunctions. Electrodeposition was used to synthesise holey nanosheets and heterojunctions were created using wet chemistry. Analyses consisted of XRD, Raman, SEM, HRTEM, EDS, SAED, AFM, XPS, EPR, PL, KPFM, and UV-Vis. DFT was used …
-
Atomic Layer Deposition of Ru and RuO2: New Process Development, Fabrication of Heterostructured Nanoelectrodes, and Applications in Energy Storage
… were developed for Ru and RuO2 showing stable growth rates of 0.5 Å/cycle and 0.4 Å/cycle respectively. Both process are discussed and compared to similar processes reported in the literature. The Ru process is shown to have significantly lower nucleation while the RuO2 is …
-
Evaluation of Catalyst Layer Composition on Proton-Exchange Membrane Water Electrolyzer Performance and Durability
… commercial PEM electrolyzers. Ruthenium oxide (RuO2) is more OER-active and less expensive than iridium oxide, yet RuO2 catalysts lack stability in the highly acidic environment during operation. The objective of this work was to help make PEM electrolysis more viable by evaluating the effect of …
-
Preparation Of Mesoporous Silica Supported Ruthenium Oxides And The Application And Kinetic Study In The Catalysis Of Water Oxidation
… remain to be improved. Ruthenium oxide (RuO2) has long been known as one of the most active catalysts for water oxidation. In this thesis are reported the syntheses of a series of mesoporous silica supported nanosized RuO2, their characterization, application in Ce(IV)-induced water …
-
Metal-Substituted Ruthenium Oxide Oxygen Evolution Electrocatalysts: Structure, Catalytic Activity, and Electrochemical Stability
… not rely on iridium are needed. Ruthenium oxide (RuO2) is lower cost than IrO2 and highly active but is unstable in acidic media during PEMWE operation, creating challenges for practical implementation. To produce an active and stable OER catalyst, we investigated how the substitution of niobium …
-
Materials properties of ruthenium and ruthenium oxides thin films for advanced electronic applications.
… (MOS) device applications. Moreover, Ru and RuO2 are promising candidates as diffusion barriers for copper interconnects. In this thesis, the thermal stability and interfacial diffusion and reaction of both Ru and RuO2 thin films on HfO2 gate dielectrics were investigated using Rutherford …
-
Development, manufacture and application of a solid-state pH sensor using ruthenium oxide
… sensor is developed using ruthenium metal oxide (RuO2). Initially, pH sensitive RuO2 electrodes were prepared by deposition with radio frequency magnetron sputtering (RFMS) in a reactive oxygen plasma, onto screen-printed carbon based electrical contacts (substrates). These electrodes performed …
-
Surface Chemistry and Work Function of Irradiated and Nanoscale Thin Films Covered Indium Tin Oxides
… and sputtering based depositions of RuO2 and Se nano-layers on indium tin oxides (ITOs). We elucidated the effect of Ar sputtering on the composition and chemistry of Sn rich ITO surface. We demonstrated that while a combination of UV-ozone radiation and Ar sputtering removes most of …
-
Avaliação das técnicas eletrolíticas de eletrocoagulação-eletroflotação e eletro-oxidação separadas e conjugadas aplicadas no tratamento de lixiviados
… (Ti) and titanium doped with ruthenium oxide (Ti-RuO2) electrodes, yielding 43 to 54% of COD removal with best CD of 331 A/m2 . In a third phase, conjugated and simultaneous processes were applied in a single reactor with best CDs, with Al electrodes in ECF and EO with SS, Ti and Ti-RuO2 …
-
Ruthenium-Chromium Oxide Aerogels Oxygen Evolution Electrocatalysts: Structure, Activity and Stability
… and similar stability compared to a commercial RuO2 and the activity remained higher than RuO2 after an accelerated durability test. The Ru-600 catalyst exhibited higher stability than the commercial RuO2 after the accelerated durability test. This work shows that chromium introduced into …
-
Aplicação de um reator eletroquímico em fluxo através de um ânodo de Ti/RuO2 na degradação de compostos orgânicos presentes em um efluente sintético contaminado por derivado de petróleo
… the electrodes. Electro-oxidation using DSA (Ti/RuO2) electrodes, due to their low cost, greater durability and relative efficiency, has been studied in the removal of organic substances derived from petroleum. The complete factorial design was employed as a statistical technique in order to …
Page 1 of 6