Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 12 of 12 for “"Rubbery modulus"”.
-
Effect of chemical structure and crosslinking density on the thermo-mechanical properties and toughness of (meth)acrylate shape-memory polymer networks
… crosslink density, glass transition temperature, rubbery modulus, failure strain, and toughness. The glass transition temperature of the networks ranged from -29 to 112 °C, and the rubbery modulus ranged from 2.8 to 129.5 MPa. At low crosslink density (Er < 10 MPa) network chemistry has a profound …
-
An exploration of shape memory polymers and (nano) composites for packaging applications.
… glass transition temperatures (Tg) and rubbery modulus values ranging from -18 to 39 °C and 0.7 to 25.0 MPa, respectively. The networks were characterised for homogeneity, thermal, mechanical and shape memory properties. The adjustable Tg had a great impact on the shape memory effect …
-
Physical and mechanical behavior of amorphous poly(arylene ether)ketone and poly(arylene ether)ketone modified bismaleimides
… Tg’s around 160 °C as well as a stable rubbery modulus to above 350°C, as determined by dynamic mechanical measurements. Toughness of these networks increased dramaticly with increasing Mc up to the chain entanglement molecular weight. Tg and rubbery modulus were only slightly altered by …
-
Molecular Engineering of Polycarbonates Derived from Polyhydroxyl Natural Products as Resourceful Materials
… glass transitions (38 to 65°C), without altering rubbery modulus. Control force cyclic testing demonstrated excellent shape memory; high percent recoverable strains were obtained, reaching 100% recovery during fourth and fifth cycles.
-
Optimization of mechanical properties and manufacturing techniques to enable shape-memory polymer processing
… as the glass transition temperature (Tg) and rubbery modulus (ER). Exploring materials with large recoverable strains, a model copolymer of photo-polymerized methyl acrylate (MA), isobornyl acrylate and crosslinker bisphenol A ethoxylate dimethacrylate was shown to strain above 800%, twice the …
-
Renewable Source Thermoplastics
… while DMA data showed comparable glassy and rubbery modulus for all sets of TPUs. These results indicate that the renewable source Cerenol Polyol would be a viable drop-in replacement for petroleum-based Polyols at for a wide range of applications without sacrificing overall TPU performance. …
-
Data-Driven Study of Polymer-Based Nanocomposites (PNC) – FAIR Online Data Resource Development and ML-Facilitated Material Design
… absolute percentage error (MAPE) of < 5% for rubbery modulus, < 1% for glassy modulus, and 1.22% for tan delta peak, with as few as 500 FEA simulation data for fine-tuning. ViscoNet demonstrates impressive generalization capabilities from thermoplastics to thermosets. ViscoNet enables the …
-
Enhancing the deformability of elastic memory sandwich composites with elastic memory/conventional epoxy hybrid facesheets
… the inherent ability of polymers to exist in a rubbery state at higher temperatures and in a glassy state at lower temperatures, shape memory composites (SMC), which incorporate continuous fiber reinforcement, can accommodate strains up to 5%, compared to the ultimate strain of 1% - 1.5% typical …
-
Thermal and rheological characterization of polystyrene and polystyrene grafted silica nanocomposites
… one decade, of the dynamic storage (G') and loss modulus (G'') curves toward lower frequencies is observed consistent with the increase in Tg. Terminal flow behavior is not observed for the nanocomposites in the experimental window, A 7 % reduction of the rubbery plateau moduli (GNo) for the 35 …
-
Adapted creep test for the study of non-equilibrated thin polymer films
… stresses are expected to be comparable to the rubbery modulus of the polymer. The first key observation was found for an as-cast film, where a surprisingly rapid and large contraction of the filament in the creep experiment was observed. However, a filament obtained from an annealed film showed …
-
Linear and non-linear rheology of heterogeneous polymeric systems: from entangled polymeric networks and elastomers to nanocomposites
… we clearly show that large departures of the rubbery modulus for industrial elastomers may occur when dynamic mechanical measurements are performed in torsion according to industrial standards. The testing sample was chosen in such a way that a comparison with the most common and reliable …
-
Viscoelastic study of natural polymers: DNA and amber
… scaling. A concentration dependence of plateau modulus G_N^0 ~ C^2.29 is obtained from the dynamic tests. The plateau modulus scaling is consistent with the blob model for entangled polymer solutions. The terminal relaxation time shows a change like the unentangled to entangled crossover in …