Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 69 for “"Rut Depth"”.
-
Flexible Pavement Rut Depth Modeling For Different Climate Zones
Pavement rutting is one of the most important types of pavement distress that affect road safety and ride quality. Therefore, the primary objective of this study was to develop pavement rutting empirical models for different climate zones to predict pavement rutting on granular base based on LTPP …
-
Rut Depth Prediction Modeling Using LCPC Tester Of Hot Mix Asphalt
Abstract Rut Depth Prediction Modeling Using LCPC Tester of Hot Mix Asphalt Rutting is considered as one of the major modes of deterioration to flexible pavements. The goal of this study is to contribute to the understating of this phenomenon, and to establish a simple tool predict the resistance …
-
Rut Depth Prediction on Flexible Pavements - Calibration and Validation of Incremental-Recursive Models
… The objective is to evaluate different types of rut depth prediction models for an incremental design process. Two different models were chosen for further studies: One model that calculates the plastic strain through the whole pavement, and one model that calculates a critical response. The …
-
Comparative Study of Low-Range LiDAR, Mid-Range LiDAR, and Depth Camera for Autonomous Rut Depth Measurement
Measuring the depth of ruts caused by vehicles on different terrains is very important as it provides information that can be used for terrain assessment, timely maintenance, vehicle traversability, ecological impact, and others. Traditionally, rut depth is measured manually but recently algorithms …
-
Evaluating Pavement Response and Performance with Different Simulative Tests
… under ALF, MMLS 3 and APA tests, in terms of rut depth, strain response, seismic stiffness, and contact stress using both experimental and numerical simulation results. Test slabs extracted from the ALF test lanes, are trafficked with the MMLS3 under comparable environmental conditions at …
-
Pavement management analysis of Hamilton County using HDM-4 and HPMA
… treatment may cost less, but does not improve rut depth, while an overlay improves the roadway including structural cracking and rut depth. In Tennessee, HPMA cost-effective optimization analysis is available to adequately distribute the available funds.
-
Geosynthetic stabilization of unpaved roads on soft ground : a field evaluation
… on the relationship between number of passes and rut depth. Performance of the test sections was evaluated from measurements of rut depth, base course thickness, base course deformations, geosynthetic strain, and deformed profile of the geosynthetic, with increasing number of vehicle passes. …
-
Improving Asphalt Concrete Mixtures' Resistance to Studded Tires and Chains Wear
… significant correlation was found between rut depth resulting from the studded tire at Condition 1 and the rut depth resulting from non-studded tire at Condition 2. Additionally, a relationship was observed between rut depth resulting from studded tire at Condition 2 and the rut depth …
-
Development of Laser System to Measure Pavement Rutting
Asphalt pavement rutting is one of the most common and destructive pavement distresses observed on U.S. roads, particularly in the urban environment at intersections. They are an important indicator of the structural integrity of the pavement as well as having an impact on road user safety. For …
-
Investigation of the impact of climate change on road maintenance
… the study were threefold: firstly, to develop a rut depth prediction model that considered potential effects of future climate; secondly, to formulate a framework for quantification of uncertainties; and finally, to demonstrate the application of the tools developed using a case study. The model …
-
Providing a Statistical Analysis Framework for Agencies to Analyze the Parameters Influencing the Rutting and Cracking Performance of Asphalt Mixtures
… (BMD) to try and address both cracking and rutting. However, there is uncertainty on what asphalt mixture properties can impact cracking and rutting. This research explores the IDEAL-CT and APA data from two years of mix designs collected by ARDOT. To understand which asphalt mixture …
-
Use of the Clegg Impact Soil Tester to Access Rutting Susceptiblity of Cement-Treated Base Material Under Early Trafficking
… gain has occurred can lead to marring or rutting of the treated layer. The specific objectives of this research were to examine the correlation between Clegg impact values (CIVs) determined using a heavy Clegg impact soil tester and rut depths measured in newly constructed CTB and …
-
Terrain and Vehicle-Terrain Sensing and Estimation in Real-Time for Use in Autonomous Vehicles
… In the area of direct sensing the tire rut depth left behind by a tire is measured using a system of two Intel RealSense D405 stereo cameras. The rut depth can be assumed to be the same as the tire sinkage in this application and is then used to get the tire entry angle. The tire entry …
-
A methodology for characterizing pavement rutting condition using emerging 3D line laser imaging technology
Pavement rutting is one of the major asphalt pavement surface distresses affecting pavement structure integrity and driving safety and is also a required performance measure specified in the Highway Performance Monitoring System (HPMS). Manual rutting measurement is still conducted by many state …
-
Central Tire Inflation for Agricultural Vehicles
… a 2% improvement in traction, a 10% decrease in rut depth, and an improvement in cone index in the top 15 cm (6 in) of soil.
-
An evaluation of waste plastic in asphalt pavement towards a circular economy
… characterize the workability, high-temperature (rutting) performance, and low temperature (cracking) performance. AASHTO Superpave method was performed to explore the LLDPE modified mixture performance with MoDOT criteria. Rutting resistance, cracking resistance at different temperatures were …
-
Feasibility for the use of non-contact ultrasound for application with asphalt concrete materials
… value of the Asphalt Pavement Analyzer rut depth. It was found that the use of the non-contact ultrasound measurement correlates with the HMA material property of bulk specific gravity to a degree that can discern changes in gradation, bulk specific gravity, and with the material …
-
UTILIZATION OF THE CLEGG IMPACT HAMMER TO PREDICT CALIFORNIA BEARING RATIO AND TIRE RUT DEPTHS OF OPERATING AIRCRAFT
… as well as successfully predict accumulative rut depths for multiple passes of an aircraft on an unsurfaced soil runway. To obtain this goal a laboratory procedure was set up to physically measure strengths of varying soil types under various moisture conditions and densities. Sufficient data …
-
Influence of Turning on Military Vehicle Induced Rut Formation
<p>Rut formation can severely influence soil conditions and vegetation, and reduce vehicle mobility. Vehicle operations can affect rut formation. Ruts formed in straight vehicle paths are different than when the vehicle turns. This research is mainly to investigate the effects of vehicle turning …
-
Field Evaluation of Asphalt Overlays on State Route 30 in Northern Utah
The purpose of this research was to compare the rutting, cracking, and development of roughness of two asphalt overlay types commonly used in northern Utah and to evaluate how well the Mechanistic-Empirical Pavement Design Guide (MEPDG) can predict the observed results. AC-10 and PG 64-34 asphalt …
Page 1 of 4