Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 87 for “"SAW devices"”.
-
Diffraction Modelling for SAW Devices on Anisotropic Substrates
… to solving the diffraction problem for SAW devices on anisotropic substrates. Diffraction is a nonlinear second-order effect which alters SAW performance, and some of the difficulty in predicting the actual effect is the anisotropy of acoustic materials, which makes the Fresnel Integral …
-
Resampling of fir functions for application to saw devices
Master of Science (M.S.)
-
Lithium niobate thin films on diamond substrates for SAW devices
… magnetron sputtering. The surface acoustic wave (SAW) characterizations of the multilayer lithium niobate/diamond/silicon are calculated. The lithium niobate thin films as well as the diamond/silicon substrates are structurally analyzed using techniques such as Bragg X-ray diffraction, scanning …
-
Investigation of silicon nitride films by pecvd and applications to saw devices
Doctor of Philosophy (Ph.D.)
-
Micro-saw devices based on randomly-oriented PZT films: Design, fabrication and characterization
… in this work. A micro-surface acoustic wave (muSAW) device was fabricated through a multi-layer thin film technique, where the active sensing material is based on a 300 nm thick PbZr0.52Tii0.48O3 (PZT) piezoelectric film grown via a sol-gel process. The electrodes were based on Si/SiO2/TiOx/Pt …
-
Modeling of SAW devices using antisymmetric extension of a periodic FEM/BEM and P-Matrix model
Zunehmend strengere Anforderungen an heutige akustische Oberflächenwellen (OFW-) Bauelemente in Anwendungen wie beispielsweise Hochfrequenzfilter, führen zu steigenden Anforderungen an Simulations- und Entwicklungswerkzeuge für OFW-Strukturen hinsichtlich Rechengeschwindigkeit, Genauigkeit und …
-
Characterization of Plasticizer-Polymer Coatings for the Detection of Benzene in Water Using Sh-Saw Devices
… a shear horizontal surface acoustic wave (SH-SAW) sensor to detect benzene in water. There are many polymers which are unavailable for use as a sensing polymer due to their glassy nature. The use of plasticizers allows the polymer properties to be modified to give a more sensitive polymer by …
-
Analysis of the Detection of Organophosphate Pesticides in Aqueous Solutions Using Polymer-Coated SH-SAW Devices
Organophosphate pesticides (OPs) have been found as contaminants in surface and ground waters, soil, and agricultural products. Because OPs are toxic compounds, rapid detection/monitoring of OPs in groundwater is necessary to allow for real-time remediation. Detection of OPs in water has already …
-
Design, Analysis And Implementation Of Orthogonal Frequency Coding In Saw Devices Used For Spread Spectrum Tags And Sensors
SAW based sensors can offer wireless, passive operation in numerous environments and various device embodiments are employed for retrieval of the sensed data information. Single sensor systems can typically use a single carrier frequency and a simple device embodiment, since tagging is not …
-
Dynamic behavior of ultra-thin polymer films deposited on surface acoustic wave(SAW) devices: A feasibility study of saw applications
… to delve into mathematical interpretation of SAW device responses, it did seek to evaluate the usefulness of the SAW technology from an engineering perspective.
-
Direct current resistance measurement structure for determining line width and metal thickness variations in surface acoustic wave devices.
SAW devices are often designed to act as bandpass filters. The electrical properties of surface acoustic wave (SAW) devices are difficult to measure prior to being wirebonded into packages. Matching difference in SAW devices cause difficulties in obtaining accurate measurement of the centre …
-
Lithium niobate thin films deposited on silicon substrates for SAW applications (surface acoustic wave)
… make low insertion loss surface acoustic wave (SAW) devices. For SAW devices, the insertion loss mainly relates to the electromechanical coupling coefficient (K$\sp2$) of the materials. To get low insertion loss in SAW devices, we need use high K$\sp2$ materials. Among common piezoelectric …
-
Passive, Wireless SAW OFC Strain Sensor and Software Defined Radio Interrogator
Surface acoustic wave (SAW) devices have exhibited unique capabilities to meet the demands for many applications due to the inherent properties of SAW devices and piezoelectric materials. In particular, SAW devices have been adapted as sensors that can be configured to operate both passively and …
-
4.74 GHz Harmonically Operated SAW Device for Sensing Applications and Interrogation System
Surface acoustic wave (SAW) devices have provided solutions to many sensor applications. With the increasing use of the electromagnetic spectrum, the adoption of higher frequencies for new developments is becoming a necessity. SAW devices represent a solution for advancing many emerging sensor's …
-
Chemically sensitive polymer-mediated nanoporous alumina SAW sensors for the detection of vapor-phase analytes
… (NP) alumina-coated surface acoustic wave (SAW) devices that have been surface-modified with polymeric mediating films. The research in this dissertation covers the refinement of the NP alumina coating, development of dendrimer and/or polymer surface modifications, design of composite …
-
The Design and Implementation of Surface Acoustic Wave Devices for Linear FM and Nonlinear FM Pulse Compression Technique for Radar Applications
… is to design, fabricate, and compare dispersive SAW devices using both linear FM and a new non-linear FM scheme. This new non-linear FM scheme uses the Blackman function as the modulating signal of the FM waveform. Up-chirped and V-chirped devices for both linear and the new non-linear FM scheme …
-
Group III-nitride devices and applications
… focuses on developing group III-nitride based devices for novel applications.;GaN is a robust, chemically inert, piezoelectric material, making it an ideal candidate for surface acoustic wave (SAW) devices designed for high temperature and/or harsh environment sensors. In this work, SAW devices …
-
Characterization of PMMA Polymer using Thickness-Shear Mode Resonator
… sensors and as a waveguiding layer in guided SH-SAW devices. PMMA is suitable as a chemical sensing layer because of its analyte sorption ability and good resistance to acid and environmental deterioration. It is a good waveguiding layer for guide SH-SAW devices because of its low acoustic …
-
The design and analysis of a radio frequency (RF) quadrature combiner using surface acoustic wave techniques and the coupling of modes model
… has been developed using surface acoustic wave (SAW) technology. The device is intended for use in quadrature communication systems and has four electrical ports; two RF inputs and two RF outputs. The device produces the real sum and the quadrature sum of the two input signals. There are various …
-
Development and evaluation of an acylating agent detector using surface acoustic wave devices
… a highly desirable goal. Surface Acoustic Wave (SAW) devices have been used for chemical analysis since 1978. While sensitive to mass changes occurring on their surfaces, they are not selective to the mass they will detect. Their use as chemical sensors requires the development of specificity for …
Page 1 of 5