Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 28 for “"SDOF Analysis"”.

  1. Performance of Steel Fiber-Reinforced Concrete Beams Under Shock Tube Induced Blast Loading

    … dynamic inelastic single-degree-of-freedom (SDOF) analysis. Overall the analytical results demonstrate that SDOF analysis can be used to predict the blast response of beams built with SFRC.

    ottawa-retro Repository record for Performance of Steel Fiber-Reinforced Concrete Beams Under Shock Tube Induced Blast Loading (opens in a new tab)

  2. Blast Performance of Reiforced Concrete Beams Constructed with High-Strength Concrete and High-Strength Reinforcement

    … dynamic inelastic single-degree-of-freedom (SDOF) analysis and includes a sensitivity analysis examining the effect of various modelling parameters on the response predictions. Overall the analytical results demonstrate that SDOF analysis can be used to predict the blast response of beams …

    ottawa-retro Repository record for Blast Performance of Reiforced Concrete Beams Constructed with High-Strength Concrete and High-Strength Reinforcement (opens in a new tab)

  3. Development of software architecture to investigate bridge security

    … of a solver (prestressed girder with advanced SDOF analysis model) is also presented to illustrate a fast-running algorithm. The SDOF model incorporates the development of a moment-curvature response curve created by a layer-by-layer analysis, a non-linear static analysis accounting for both …

    texas Repository record for Development of software architecture to investigate bridge security (opens in a new tab)

  4. Blast Retrofit of Unreinforced Masonry Walls Using Fabric Reinforced Cementitious Matrix (FRCM) Composites

    … analytical research, Single Degree of Freedom (SDOF) analysis was performed to predict the blast behaviour of the stone load-bearing retrofit wall. This was done by computing wall flexural strength using Plane Section Analysis, and developing an idealized resistance curve for use in the SDOF …

    ottawa-retro Repository record for Blast Retrofit of Unreinforced Masonry Walls Using Fabric Reinforced Cementitious Matrix (FRCM) Composites (opens in a new tab)

  5. Effect of High-Performance Steel Materials on the Blast Behaviour of Ultra-High Performance Concrete Columns

    … dynamic inelastic, single-degree-of-freedom (SDOF) analysis. A sensitivity analysis was also performed to examine the effect of various modelling parameters on the analytical predictions. Overall, it was shown that SDOF analysis could be used to predict the blast response of UHPC columns with …

    ottawa-retro Repository record for Effect of High-Performance Steel Materials on the Blast Behaviour of Ultra-High Performance Concrete Columns (opens in a new tab)

  6. Increasing the Blast Resistance of Concrete Masonry Walls Using Fabric Reinforced Cementitious Matrix (FRCM) Composites

    … analytical research, Single Degree of Freedom (SDOF) analysis was carried out to predict the blast behaviour of the strengthened walls. This was done by computing wall flexural strength using plane sectional analysis and developing idealized resistance curves for use in the SDOF analysis. In …

    ottawa-retro Repository record for Increasing the Blast Resistance of Concrete Masonry Walls Using Fabric Reinforced Cementitious Matrix (FRCM) Composites (opens in a new tab)

  7. Pressure-impulse diagrams using finite element analysis for reinforced concrete slabs subjected to blast loading

    … provided in the slab. Hence a comprehensive analysis is performed on a representative slab panel with varying reinforcement. Due to the nature of the blast loading analysis method used influences the slab response significantly. Hence the slab response was predicted and compared using finite …

    umkc Repository record for Pressure-impulse diagrams using finite element analysis for reinforced concrete slabs subjected to blast loading (opens in a new tab)

  8. The Dynamic Response of Concrete Filled FRP Tubes Subjected to Blast and Impact Loading

    … validate a non-linear single degree of freedom (SDOF) model. This impact phase also led to the development of relatively simple procedures for designing CFFTs under impact loading using either SDOF modeling or the conservation of energy. Analysis of the blast testing results led to the …

    queens Repository record for The Dynamic Response of Concrete Filled FRP Tubes Subjected to Blast and Impact Loading (opens in a new tab)

  9. Effect of High-Performance Concrete and Steel Materials on the Blast Performance of Reinforced Concrete One-Way Slabs

    … dynamic inelastic single-degree-of-freedom (SDOF) analysis. The dynamic analysis is conducted by generating load-deformation resistance functions for the slabs incorporating dynamic material properties.

    ottawa-retro Repository record for Effect of High-Performance Concrete and Steel Materials on the Blast Performance of Reinforced Concrete One-Way Slabs (opens in a new tab)

  10. Characterization of adobe wall structural systems for dynamic response

    … Protocols and standards for adobe structural analysis, design, and construction has been established to ensure quality assurance and structural stability. The vulnerabilities to seismic loadings have been established, and research and design of seismic retrofits for existing and new adobe …

    missouri Repository record for Characterization of adobe wall structural systems for dynamic response (opens in a new tab)

  11. Hardening of Reinforced Concrete Columns Against Blast Loading by Prestressing and ECC Jacketing

    … of reflected pressure-impulse combinations. Analysis of the results obtained in the experimental phase revealed that the proposed strengthening and hardening techniques significantly enhanced the behavior of the columns subjected to combined axial and blast loading. Deployment of external …

    ottawa-retro Repository record for Hardening of Reinforced Concrete Columns Against Blast Loading by Prestressing and ECC Jacketing (opens in a new tab)

  12. Performance of Ultra-High Performance Fiber Reinforced Concrete Columns Under Blast Loading

    … columns is predicted using dynamic inelastic analysis. The dynamic responses of the columns are predicted by generating dynamic load-deformation resistance functions for UHPFRC and conducting single-degree-of-freedom (SDOF) analysis using software RC-Blast.

    ottawa-retro Repository record for Performance of Ultra-High Performance Fiber Reinforced Concrete Columns Under Blast Loading (opens in a new tab)

  13. Experimental static resistance of cold-formed steel roof truss systems

    … envelope systems. Dynamic testing and numerical analysis are uneconomical and tedious for every design variation, so the simplified single degree of freedom (SDOF) approach to dynamic analysis is commonly used to project blast resistance of complicated structural systems. In order to perform the …

    missouri Repository record for Experimental static resistance of cold-formed steel roof truss systems (opens in a new tab)

  14. Investigating the Use of Energy Absorbing Connections (EAC) to Enhance the Performance of Mass Timber Structures Subjected to Blast Loading

    … of timber assemblies. Preliminary finite element analysis led to selecting nine steel EACs with varying geometries for further experimental investigation. A total of eighteen specimens were tested statically. In comparison, a total of eighteen specimens were tested dynamically in the shock tube …

    ottawa-retro Repository record for Investigating the Use of Energy Absorbing Connections (EAC) to Enhance the Performance of Mass Timber Structures Subjected to Blast Loading (opens in a new tab)

  15. Response of Reinforced Concrete Reservoir Walls Subjected to Blast Loading

    … predictions using the Singe-Degree-Of-Freedom (SDOF) analysis method. The reservoir walls in this study were designed according to the water volume capacity using the Portland Cement Association (PCA 1993) methodology. The design was validated using software SAP 2000. The experimental program …

    ottawa-retro Repository record for Response of Reinforced Concrete Reservoir Walls Subjected to Blast Loading (opens in a new tab)

  16. Effect of Corrosion on the Flexural and Shear Responses of Reinforced Concrete Beams Subjected to Quasi-Static and Blast Loads

    … including: 1) single-degree of freedom (SDOF) analysis (with the resistance functions developed using FE modelling); and 2) the blast analysis capabilities of FE software VecTor2. Overall both approaches led to acceptable predictions of maximum mid-span displacements when compared to the …

    ottawa-retro Repository record for Effect of Corrosion on the Flexural and Shear Responses of Reinforced Concrete Beams Subjected to Quasi-Static and Blast Loads (opens in a new tab)

  17. Performance and Design of Retention Anchors in Blast Resistant Windows

    … project was undertaken to address the behaviour, analysis, and design of window retention anchors. The research program consisted of combined experimental and analytical components. Three main phases were pursued, comprising of: i) Experimental research using a shock tube as blast simulator, ii) …

    ottawa-retro Repository record for Performance and Design of Retention Anchors in Blast Resistant Windows (opens in a new tab)

  18. Blast Retrofit of Unreinforced Masonry Walls Using ECC Shotcrete

    … the use of a mesh with a larger area of steel. A SDOF analysis was performed to predict the blast response of the test walls. The analysis was done by generating resistance functions for the walls through analytical models. The analysis was found to agree reasonably well with the experimental data.

    ottawa-retro Repository record for Blast Retrofit of Unreinforced Masonry Walls Using ECC Shotcrete (opens in a new tab)

  19. Improved Connections for Blast-Resistant Curtain Walls

    … in this thesis to address the behavior, analysis, and design of curtain wall connections, both between the mullions and supporting concrete slabs/beams and the mullions and transoms. The research project consists of three phases: i) Experimental research using the University of Ottawa …

    ottawa-retro Repository record for Improved Connections for Blast-Resistant Curtain Walls (opens in a new tab)

  20. Modeling of Mass Timber Components Subjected to Blast Loads

    … simultaneously. Single-degree-of-freedom (SDOF) and finite element analysis (FEA) methodologies were used to predict the behaviour in terms of displacement-time histories and failure modes. The inputs for the analytical methods relied on values sourced from literature or manufacturer data. …

    ottawa-retro Repository record for Modeling of Mass Timber Components Subjected to Blast Loads (opens in a new tab)

Page 1 of 2