Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 737 for “"SEM/EDS"”.

  1. Material Characterization of Electrodeposited Copper-Nickel Nanolaminated Alloy by SEM, EDS, and XRD

    … layers and over 43wt% Ni in Cu-rich layers. EDS data of the same deposit differed significantly from these values, suggesting an overall composition closer to 55 wt% Ni, with a Ni-rich layer composition of 81 wt% Ni and 8.4 wt% Ni in the Cu-rich layers. Grain sizes of 15.8-22.3 nm were …

    washington Repository record for Material Characterization of Electrodeposited Copper-Nickel Nanolaminated Alloy by SEM, EDS, and XRD (opens in a new tab)

  2. Evaluation of the Potential of Automated SEM-EDS Analysis for the Discrimination of Inorganic Soil Particles

    … preparation and mounting of mineral grains for SEM-EDS analysis without the use of resin embedding techniques or polishing. In the process of that development, the nature of commercially-available “known” minerals was investigated, the destructiveness of plasma cleaning assessed, and a variety …

    cuny-grad Repository record for Evaluation of the Potential of Automated SEM-EDS Analysis for the Discrimination of Inorganic Soil Particles (opens in a new tab)

  3. Manganese oxide mineral phases produced at room temperature under acidic conditions investigated with XRD, TEM, SEM, EDS, and BET

    This thesis concerns characterization of synthetic manganese oxides belonging to mineral phases known as Birnessite and Cryptomelane. Presented here are the results of an experiment designed to examine the influence of sodium, potassium, chloride, and sulfate ions on the reduction of potassium …

    unlv Repository record for Manganese oxide mineral phases produced at room temperature under acidic conditions investigated with XRD, TEM, SEM, EDS, and BET (opens in a new tab) Download PDF for Manganese oxide mineral phases produced at room temperature under acidic conditions investigated with XRD, TEM, SEM, EDS, and BET (opens in a new tab)

  4. Fluorine concentrations of ore fluids in the Illinois-Kentucky district : evidence from SEM-EDS analysis of fluid inclusion decrepitates

    … producing a fluorite-dominated MVT ore mineral assemblage. The purpose of the present study is to test this hypothesis more directly by determining the fluorine concentration of the Illinois-Kentucky ore fluid through SEMEDS analysis of evaporative solute mounds resulting from thermal …

    missouri Repository record for Fluorine concentrations of ore fluids in the Illinois-Kentucky district : evidence from SEM-EDS analysis of fluid inclusion decrepitates (opens in a new tab)

  5. Forensic Analysis Of Automobile Paints By Atomic And Molecular Spectroscopic Methods And Statistical Data Analyses

    … / energy dispersive x-ray spectroscopy (SEM/EDS) and Fourier transform infrared spectroscopy - attenuated total reflection (FTIR-ATR) analyses were also performed. Two separate methods of LIBS analysis of samples were used: a cross sectional analysis and a drill down analysis. SEM/EDS …

    ucf Repository record for Forensic Analysis Of Automobile Paints By Atomic And Molecular Spectroscopic Methods And Statistical Data Analyses (opens in a new tab)

  6. Understanding the Leaching Mechanism for Lead (Pb) Found in Components of Locally Manufactured Handpumps in Eastern Madagascar

    … Spectroscopy with Scanning Electron Microscope (SEM-EDS) were performed to address the objectives of this research. The pump component samples for the analysis were selected based on the amount and visual characteristics of the scale seen on the valve weights. The scale was identified to be …

    usf Repository record for Understanding the Leaching Mechanism for Lead (Pb) Found in Components of Locally Manufactured Handpumps in Eastern Madagascar (opens in a new tab)

  7. Vliv dezoxidační přísady v nátěru na povrchovou jakost odlitku

    … stechiometrických výpočtů, následné plošné SEM/EDS analýzy reálné distribuce částic a ověření vlastností modifikovaných nátěrových suspenzí byly pro experimentální sérii stanoveny koncentrace 5 a 10 hm. % Al v sušině nátěru. Pro ověření jejich účinnosti byla navržena zkušební geometrie …

    brno-tech Repository record for Vliv dezoxidační přísady v nátěru na povrchovou jakost odlitku (opens in a new tab)

  8. Evaluation of Chloride Diffusion in Concrete Using Bulk Diffusion Test and Scanning Electron Microscopy

    … tedious testing. Scanning Electron Microscopy, SEM, equipped with Energy Dispersive X-ray Spectroscopy, EDS, proved to be the most promising alternative which directly quantifies the chloride content of a sample. A research study was conducted to develop a sound, sustainable SEM-EDS test …

    embry-riddle Repository record for Evaluation of Chloride Diffusion in Concrete Using Bulk Diffusion Test and Scanning Electron Microscopy (opens in a new tab)

  9. Příprava povlaku na bázi yttria pro zvýšení korozní odolnosti hořčíkové slitiny AZ31

    … popis morfologického a prvkového složení skrze SEM-EDS analýzu a potvrzení vzniku struktur, vypozorovaných touto metodou, bylo provedeno skrze FTIR analýzu. Nejlepším povlakem připraveným za mírných podmínek byl vzorek připravený při 90 °C po 24 h s koncentrací yttria 0,05 M a za hydrotermálních …

    brno-tech Repository record for Příprava povlaku na bázi yttria pro zvýšení korozní odolnosti hořčíkové slitiny AZ31 (opens in a new tab)

  10. Slitiny na bázi Mg-Zn-Ti připravené práškovou metalurgií

    … na bázi Mg Zn Ti. Proces se skládal z přípravy předslitiny TiZn, mletí této předslitiny společně s Mg práškem. Směs předslitiny a Mg prášku byla podrobena různým teplotním procesům. Výrobní procesy byly optimalizovány napříč všemi sériemi. Připravené materiály byly podrobeny analýze SEM/EDS, XRD a …

    brno-tech Repository record for Slitiny na bázi Mg-Zn-Ti připravené práškovou metalurgií (opens in a new tab)

  11. Discrimination Of Forensic Trace Evidence Using Laser Induced Breakdown Spectroscopy

    … microscopy-energy dispersive x-ray spectroscopy (SEM-EDS) is the primary analytical tool for determining the elemental composition of trace evidence items. However, due to the time it takes to obtain the required vacuum and the limited number of samples that can be analyzed at any one time, …

    ucf Repository record for Discrimination Of Forensic Trace Evidence Using Laser Induced Breakdown Spectroscopy (opens in a new tab)

  12. ADVANCED MATERIALS PROCESSING FOR DENSIFICATION AND PERMEABILITY OPTIMIZATION AT ELEVATED TEMPERATURES

    … evolution was characterized through SEM, EDS, and XRD. The results showed that a maximum of 87.96% theoretical density was achieved at 1000°C after 24 hours. SEM, EDS and XRD confirmed increasing grain coalescence and progressive NaCl infiltration across all sintering conditions. At …

    nps Repository record for ADVANCED MATERIALS PROCESSING FOR DENSIFICATION AND PERMEABILITY OPTIMIZATION AT ELEVATED TEMPERATURES (opens in a new tab)

  13. Ion-beam and Nuclear-Reaction analysis of plasma facing components in the JET tokamak

    … που χρησιμοποιήθηκαν είναι RBS, NRA, XRF και SEM/EDS και σκοπό έχει να προσδιορισθούν τα στοιχεία που εναποτέθηκαν στα δείγματα και να εκτιμηθούν οι συγκεντρώσεις τους συναρτήσει του βάθους.

    athens Repository record for Ion-beam and Nuclear-Reaction analysis of plasma facing components in the JET tokamak (opens in a new tab)

  14. Investigation of single particle inductively couple plasma time-of-flight mass spectrometry for accurate particle classification: Forensic and environmental applications

    … microscopy-energy dispersive X-ray spectroscopy (SEM-EDS) and laser induced breakdown spectroscopy (LIBS). Two types of IGSR particles were tested, one containing lead and one that was lead-free. Using a high-throughput method such as spICP-TOFMS allows for testing of IGSR with minimal sample …

    iastate Repository record for Investigation of single particle inductively couple plasma time-of-flight mass spectrometry for accurate particle classification: Forensic and environmental applications (opens in a new tab)

  15. Clay Beds Preserved in High-Energy Gravel Deposits on Crowley’s Ridge, Northeastern Arkansas, U.S.A.--Origin and Significance from a Lithofacies and Mineralogical Perspective

    … Microscopy-Energy Dispersive X-ray spectroscopy (SEM-EDS). SEM-EDS analysis of the clay identified igneous minerals such as sanidine, volcanic glass, albite, leucite, and pumice grains. XRD analysis indicated that kaolinite content in the gravels and sands was higher than in the clay, which is …

    mississippi Repository record for Clay Beds Preserved in High-Energy Gravel Deposits on Crowley’s Ridge, Northeastern Arkansas, U.S.A.--Origin and Significance from a Lithofacies and Mineralogical Perspective (opens in a new tab)

  16. Characterization of polymer electrolyte membrane water electrolyzer components towards improving understanding of surfaces and buried interfaces

    … with energy-dispersive X-ray spectroscopy (SEM-EDS) were applied systematically across samples to compare coatings produced by rod coating, airbrush coating, ultrasonic spray coating, sputter deposition, and electrodeposition. XCT provided three-dimensional visualization of large-scale …

    colo-mines Repository record for Characterization of polymer electrolyte membrane water electrolyzer components towards improving understanding of surfaces and buried interfaces (opens in a new tab) Embargoed until 2027-08-20

  17. Bond strength between veneer porcelains and CAD/CAM ceramic to CP titanium and evaluation of fracture load and effect of aging on low fusing porcelain fired over CP TI and CAD / CAM materials cemented onto CP TI

    … of failure and bond interface was evaluated by SEM / EDS. RESULTSs: The data were analyzed statistically using ANOVA and Tukey ≤ 0.05. Group 4 is significantly higher than the other groups. Group 1 is significantly higher than group 3, but similar to group 2. SEM/EDS analysis reveals that the …

    bu Repository record for Bond strength between veneer porcelains and CAD/CAM ceramic to CP titanium and evaluation of fracture load and effect of aging on low fusing porcelain fired over CP TI and CAD / CAM materials cemented onto CP TI (opens in a new tab)

Page 1 of 37