Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 238 for “"SEM / TEM"”.
-
Growth of Textured Mullite Fibers Using Polycrystalline Precursors
Mullite whiskers were prepared by HF leaching and templated into polycrystalline mullite fibers by extrusion. Textured growth of mullite fibers with elongated grains, aligned along the long-axis of the fibers, was achieved by heat treatment. Repeated heat treatment cycles of a whisker-templated …
-
Evolution of Precipitates and Their Influence on the Mechanical Properties of β-Titanium Alloys
… %Mo alloy are obtained under specific accurate temperature controlled heat treatments. The formation and the evolution of the ω-phase based microstructures are investigated in detail via various characterization techniques such as SEM, TEM, and 3D atom probe tomography. The mechanical behavior …
-
Steam oxidation of shot peened austenitic stainless steel
… austenitic stainless steel was exposed to temperatures of 600-750°C in three atmospheres: vacuum, deoxygenated atmospheric pressure steam and deoxygenated 70bar steam. The microstructural changes and oxide morphologies of the shot peened material were observed with SEM, TEM, microhardness …
-
Příprava a charakterizace GaN nanostruktur
… analyzovány a charakterizovány pomocí metod XPS, SEM, TEM a měření fotoluminiscence (PL).
-
Carbon Coated Tellurium for Optical Data Storage
… These films were then characterized with SEM, TEM, EELS, ellipsometry, ToF-SIMS, etc, and were tested for writability and longevity. Results show the films were uniform in physical structure, are stable, and able to form permanent pits. Data was written to a disk and successfully read back …
-
Modified ldh-supported au catalystssynthesis, characterization and catalytic performances in furfural liquid phase oxidation and hydrogenation
… Characterization by IR, XRD, BET, SAA, SEM, TEM, and UV-visible techniques is performed in this work. It allows a correlation between their structure and catalytic performance, which provides insight into their mechanisms in the studied reactions.
-
Characterization and fabrication of nanoporous materials by template directed sol-gel methods
… range of pore sizes from micro to macro using template assisted sol-gel routes. Both colloidal crystals and surfactant self assemblies were employed as templates.<br/>Initial studies focussed on the fabrication of macroporous titano/alumino and tinsilicate materials by dip infiltrating …
-
Authigenic clays and stylolites in the carbonate reservoirs of the Permian Basin
… x-ray diffraction, and electron imaging such as SEM, TEM, and STEM. Dickite is the predominant authigenic clay mineral. It occurs mostly in euhedral hexagonal platelets. Authigenic illite is rarely observed, and it occurs as laths and fibers.
-
Příprava nitridových nanostruktur Al a Ga
Tato bakalářská práce se zabývá růstem a charakterizací nanostruktur Al, AlN a AlGa. Nejprve se práce zabývá teoretickým popisem růstu daných nanostruktur a využitých analytických a experimentálních metod. Růst struktur probíhal s využitím efuzních cel, jedné komerčně dostupné a jedné navržené na …
-
Otrzymywanie i charakterystyka luminescencyjno-elektrycznych kompozytów opartych o nanoluminofory domieszkowane jonami Ln(III) i nanostruktury węglowe
… produktów obejmowała badania strukturalne (SEM, TEM, XRD, FT-IR), luminescencyjne (widma wzbudzenia i emisji, zaniki luminescencji, koordynaty chromatyczności) i elektrochemiczne (CV, EIS). Właściwości mechaniczne również brano pod uwagę, jednakże bez ilościowego oznaczania.
-
NANO STRUCTURED MATERIALS FOR ENERGY APPLICATIONS
… in an isothermal fixed bed reactor at different temperatures for 50 cycles with methane as fuel, up to 15h while their structural, physical and chemical properties were identified using XRD, SEM, TEM, BET, XPS and Ar/H2-TPR. In chapter 5, aerosol synthesized Bi2O3 was found to be a useful …
-
Fabrication and Characterization of Amorphous/Nanocrystalline Thin Film Composite
… advantage to not only solar cells but other semiconductor devices. In this work composite films were created using molecular beam epitaxy and electron beam deposition interchangeably as a method to create metallic precursors. Aluminum induced crystallization techniques were used to convert an …
-
Conversion of 3-D nanostructured biosilica templates into non-oxide replicas
… methods such as X-ray diffraction, SEM, TEM and FTIR analyses. These replicas still retained the complex 3D structures and nano-scaled features of the starting diatom frustules. Some properties and possible applications of converted materials are explored and the kinetics and …
-
Controllable Synthesis of Single Phase Manganese Oxides Using Precipitation
… electrochemical, precipitation and template) are the most reported methods for the synthesis of manganese oxides. This thesis utilises precipitation, a low cost, environmentally friendly and effective way, to synthesise different pure phases of manganese oxides. In detail, manganese …
-
Synthesis and characterization of large-pore periodic mesoporouis organosilicas
… the characterization techniquesof SAXS, FE-SEM, TEM and N2 sorption analysis, the porous properties and externalmorphologies of ethylene-bridged SBA-15 PMOs prepared under a variety ofsynthetic conditions were characterized and compared with that of mesoporous silicassynthesized under …
-
Valorization and Characterization of Cellulose for Potential Agri-Food Applications
… properties were investigated through FTIR, SEM, TEM, XRD, BET, and DSC analysis. The micro-cellulose was amorphous, porous and possessed high surface area. Firstly, micro-cellulose slurry was investigated as a reinforcing agent in starch composites, where optimization studies revealed that …
-
Nové nanoprvky pro elektroniku – příprava a charakterizace
… charakterizácia bola spravená pomocou techniky SEM, TEM a EDX a vyhodnotenie nielen z štrukturálneho, ale aj z materiálového hľadiska. Jedinečná koreňová štruktúra samousporiadaných nanotyčiniek bola vyhodnotená a porovnaná po troch rôznych tepelných úpravách: po anodizácii, po vákuovom žíhaní, …
-
Self-healing Composites Based on Cellulose Nanocrystals
… materials with the advantages of self-healing systems. This thesis developed three fabrication process for sustainable self-healing composites based on CNMs. The focus is primarily on developing dehydrated solid polymeric composites capable of healing damage using cellulose nanocrystals (CNCs) …
-
Síntese de nanocompósitos de polipropileno e copolímeros poli(propileno-1-octeno) com nanolâminas de grafite através da polimerização in situ
… dispersões. Estes materiais foram estudados por SEM, TEM e WAXD. Tais análises mostraram que as nanolâminas provenientes da Nacional de Grafite apresentam menor tamanho de cristal e diâmetro, além de dispersarem-se melhor na matriz de PP, sendo este tipo de nanolâminas escolhidas para as sínteses …
-
Larval development and metamorphosis of Berthella californica (Gastropoda, Heterobranchia, Pleurobranchoidea) including phylogenetic implications
… is described using histological sectioning, SEM, TEM, and immunolabelling. Current phylogenetic hypotheses place the Pleurobranchoidea as sister to all nudibranchs, or as sister to only the anthobranch nudibranchs. Deciding between these alternatives is difficult due to extensive homoplasy …
Page 1 of 12