Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 26 for “"SENB"”.
-
Validação do método de queda de potencial para medição do comprimento de trinca em corpos de prova tipo SENB com trinca curta em ensaios de propagação de trinca por fadiga
… da trinca em Corpo de Prova (CP) tipo SENB com trinca curta; · Apresentar as curvas ao ar de propagação de trinca da/dN x ΔK obtidas em ensaios nos materiais 13Cr5Ni2Mo, 25Cr7Ni e API 5L X60; · Identificar melhorias no procedimento dos ensaios para elevar a precisão e acurácia das …
-
Development of Fracture Based Geotechnical Design of Clay Barriers
… testing, effective single edge notched beam (SENB) calibration, state-dependent geotechnical characterization, numerical comparison of crack-propagation formulations with selected experimental measures, and sequential one-way fracture-to-flow modelling. The work is organized around three …
-
Συγκριτική μελέτη μηχανικών ιδιοτήτων σύνθετων ρητινών και τεχνικών ελέγχου τους
… mode Ι and mode II Fracture Toughness employing SENB and Brazilian tests. Fractographic analysis was carried out in an SEM to determine the origin of fracture for specimens subjected to SENB, Brazilian and Impact Strength testing. The results were statistically analyzed employing ANOVA and Tukey …
-
Untersuchungen zur verlässlichen Bestimmung der kritischen Risszähigkeit hochfester dentaler Keramiken
… = IF) und dem Single-Edge-Notched-Beam-Test (SENB) durchgeführt. Die im Rahmen dieser Arbeit untersuchten opaken und transluzenten ZrO2-Keramiken besitzen vergleichbare Werte im Hinblick auf ihre Biegefestigkeit mit im Minimum 790 MPa und im Maximum 1065 MPa zum einen und ihre kritische …
-
Sustained macroscopic deflected cracking in Nickel based superalloys : mechanism and design criteria
… discs. CNB and single edge bend notch bend (SENB) fatigue tests have been carried out on cast and wrought and powder metallurgy variants of Udimet 720Li and SMDCG was observed at 300°C in air and at 300, 600 and 650°C in vacuum. A consistent measure of the onset of deflection has been …
-
Biomechanical Characterization of Dental Composite Restoratives - A Micro-Indentation Approach
… indentation modulus. Correlation for KIC between SENB and indentation fracture testing was not significant. The application of indentation fracture test on dental composite materials warrants further research.
-
Numerical simulation of high-cyclic fatigue of steel structural members
… two different specimens geometries (compact and SENB).
-
Experimental Characterization and Fracture Behavior of Graphene Nanocomposites
… geometrically scaled Single Edge Notch Bending (SENB) specimens with varying contents of graphene. It was shown that while the scaling of the pristine polymer follows Linear Elastic Fracture Mechanics (LEFM), this is not the case for nanocomposites, even for very low graphene contents. In fact, …
-
Directional Dependent Fracture Characteristics of 3D Printed Mechanical Metamaterials
… Polylactic acid (PLA) single edge notch bend (SENB) samples were 3D printed in different build directions and relative densities. These samples were then notched in the mid span and tested in three-point-bend following ASTM standard testing procedures. Our results suggest that the work of …
-
Estudo da tenacidade à fratura de um tubo soldado do aço superduplex UNS S32760
… carga máxima, utilizando corpos de prova do tipo SENB da mecânica da fratura. Os resultados aqui apresentados indicam que os AISD são bastante suscetíveis a HISC, especialmente na zona termicamente afetada, mesmo para potenciais pouco catódicos como -650 mVECS.
-
Characterization of Temperature-Dependent Mechanical Properties of Half-Heusler Thermoelectric Material and Microstructural Evolution of Reactively-Brazed Half-Heusler/Incusil Aba/Copper Interfaces
… the temperature-dependent bending strength and SENB plane strain fracture toughness of the material. Microstructural characterization of fractured surfaces allowed for establishment of fracture mechanism and microstructure-strength correlation for half-Heusler. Additionally, the work …
-
The Relationship between Microstructure and Fracture Toughness of Thermal Spray Coatings
… direct measurement of interface toughness via SENB and DCB specimens. The results of the modeling effort provide insights into tailoring the mechanical behavior by manipulation of interface features and the possible limitations of this approach.
-
Dynamic Fracture Toughness of Polymer Composites
… dynamic properties. Single edge notch bend(SENB) type geometry is used for Mode-I fracture testing and similarly end-notched flexure (ENF) type of geometry is proposed to test the samples for Mode-II type of fracture. Two different linear elastic fracture mechanics approaches are used- crack …
-
Different toughening strategies for UV-cured epoxy resins
… terms of single-edge-notch three-point-bending (SENB). Cationic UV-curing technique was utilized for the preparation of the modified epoxy composites. Specifically, the cationic photopolymerization of cycloaliphatic epoxy is known to proceed through nucleophilic attack of neutral monomer to …
-
Three-dimensional constraint based fracture mechanics
… expression for out-of-plane constraint loss in SENB and CCP specimens is proposed. In CCP specimens, constraint loss arises from both in-plane and out-of-plane effects. In-plane constraint loss can be estimated using the T-stress and this effect is then combined with out-of-plane constraint …
-
A Biomimic Self-healing Shape Memory Polymer Based Syntactic Foam for Smart Structural Composites
… was studied on single edge notched bend (SENB) specimens through three-point bending tests. Miscibility between the PSMP and the CP was validated through differential scanning calorimetric (DSC) analysis. It was found that the composite can heal structural-length scale damage at the …
-
Studies of Anisotropic Ductile Fracture Behaviour in Pipeline Steels
… toughness tests - single-edge notched bending (SENB) and single-edge notched tension (SENT) tests - of X70, X80 and X100 pipeline steels, across a wide range of constraint conditions. Good agreement was observed between experimental and numerical results. The global approach is based on …
-
Data-driven Multi-Scale Modeling with Uncertainty Quantification of Damage in Unidirectional and Woven Composites Using Parametrically-Upscaled Continuum Damage Mechanics (PUCDM) Model
… mechanisms in single-edge notched bending (SENB) tests on woven composite beams. Parametric studies are performed to investigate the effect of lower-scale morphology and material properties on the structural damage response of the beams. The two-level PUCDM models are capable of predicting …
-
Use of nanoparticles and nanotubes for the development of high-performance nanoresins and nanocomposites
… (based on the ASTM Single-Edge-Notched-Bending, SENB, tests for polymers) of neat and nano-reinforced epoxy polymer were characterized over a range of "nanoparticle" concentrations. In addition to the large-scale improvements in mechanical properties, the nanoresins developed in this work also …
-
Microstructure properties and fatigue behaviour of multiple materials fabricated by Laser Powder Bed Fusion process
… has been studied. Single edge notched bend (SENB) specimens of bi-layer and four alternating layers were built horizontally, both IN718 and 316L layers were fabricated using the same set of process parameters (with an Energy ratio of 140J/mm2). A specific HT strategy including a solution …
Page 1 of 2