Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 82 for “"SHPB"”.
-
Dynamic properties of wood using the Split-Hopkinson Pressure Bar
… of a material. The Split-Hopkinson Pressure Bar (SHPB) was initially used to study the effects of high strain rate (~103 1/s) testing of metals. Later modifications to the original technique allowed for the study of brittle materials such as ceramics, concrete, and rock. While material properties …
-
Dynamic material characterisation of solder interconnects in microelectronic packaging
… out using the split Hopkinson pressure bar (SHPB). Each solder was cast at three different cooling rates (slow cooling, moderate cooling and quench cooling) to understand how microstructure and material response change with the variation of rate of solidification of these solders. A Finite …
-
Strain-rate effects in quartz sand
… at lower stresses. Split Hopkinson pressure bar (SHPB) experiments were used to investigate the strain rate dependence of this behaviour. Measurements of radial stress indicated that an increase in the axial stiffness of the soils between strain rates of 10^-3 s^-1 and 10^3 s^-1 was likely due to …
-
Assessing the effect of friction on compression split Hopkinson pressure bar tests
… material data. A Split Hopkinson Pressure Bar (SHPB) facility had previously been developed at the University of Cape Town to allow high strain rate testing of materials in compression. However, uncertainties regarding aspects of the test method that can affect the accuracy of the results, such …
-
Dynamic response of glass under low-velocity impact and high strain-rate compression loading
… and a modified Split Hopkinson Pressure Bar (SHPB). In the low-velocity punch-shear experiment, similar trend has been observed for all glass types, and Starphire and Borosilicate demonstrated the highest total energy absorption. High strain-rate SHPB compression tests were carried out on …
-
A system for high strain rate interruptible tensile tests
The Split Hopkinson Pressure Bar (SHPB) is a widely used piece of equipment used for measuring a material's response to high strain rates. High strain rate data is critical for exhaustive characterisation, due to the sensitivity of materials to the rate at which they are strained. The principle …
-
Understanding Rate Effects in Cohesive Soils
… using the split-Hopkinson pressure bar (SHPB) to investigate strain rate dependence and strength of the soil. Conventional free field SHPB experiments typically used with solid materials is compared with rigid lateral confinement mechanisms traditionally used on soft materials, this …
-
High-Strain Rate Tensile Characterization Of Graphite Platelet Reinforced Vinyl Ester Based Nanocomposites Using Split-Hopkinson Pressure Bar
… the reverse impact Split Hopkinson Pressure Bar (SHPB) technique. The specimen geometry for tensile test is parametrically optimized by Finite Element Analysis (FEA) using ANSYS Mechanical APDL®. Uniform stress distribution within the specimen gage length has been verified using high-speed digital …
-
Numerical and experimental studies on the use of a Split Hopkinson Pressure Bar for high strain rate tension testing
The Split Hopkinson Pressure Bar (SHPB) technique is widely used to dynamically characterize metals and is increasingly being used to characterize non-metallic materials such as fiber reinforced polymeric composite materials. However, the tensile version of the SHPB apparatus requires specimen …
-
Preliminary Investigation of Ultra-High Performance Concrete Behavior at High Strain Rates using the Split-Hopkinson Pressure Bar
… In past research, Split-Hopkinson pressure bar (SHPB) tests have been used for normal strength concrete to determine material behavior at high strain rates. The behavior of advanced concrete materials, such as UHPC, under high strain rates has not been thoroughly investigated. While it is …
-
Experimental study of elasto-plastic wave propagation in one-dimensional and two-dimensional disk arrays
… and a modified split Hopkinson pressure bar (SHPB) are used to dynamically load one- (1D) and two-dimensional (2D) arrays of disks in contact. The disks are made of aluminum 6061 T6 and are selected because of their rate-independence, thus allowing static contact force-displacement laws to be …
-
Damage and Failure of Rocks and Rock-like Materials Subjected to Thermal and Dynamic Loadings
… tested using the split Hopkinson pressure bar (SHPB) apparatus. X-ray micro-CT scanning is used to quantify the thermally induced damage of specimens before mechanical loading. The results show that the dynamic failure parameters change with the loading rate and the heat-treatment temperature. …
-
Blast Attenuation in Cohesive Soils
… using the split-Hopkinson pressure bar (SHPB) apparatus. These tests were performed under both unconfined and confined conditions across varying moisture contents, from unsaturated to fully saturated states. The analysis of the experimental results reveals the strain rate dependence of …
-
An Optical Method of Strain Measurement in the Split Hopkinson Pressure Bar
The split Hopkinson pressure bar (SHPB) continues to be one of the most common methods of testing materials at medium rates of strain. Elevated rates of strain, such as those found in impact and explosive applications, have been shown to induce phenomena such as strain hardening and phase …
-
EXPERIMENTAL AND NUMERICAL SIMULATION OF SPLIT HOPKINSON PRESSURE BAR TEST ON BOROSILICATE GLASS
… controlled impact Split Hopkinson Pressure bar (SHPB) testing setup. This paper discusses the results of SHPB bar testing on 1018 cold rolled steel to validate the experimental procedures and result analysis. The work has been extended to conduct testing on borosilicate samples under different …
-
Experimental and Numerical Studies on Behavior of Plain and Fiber-Reinforced High-Strength Concrete Subjected to High Strain Rate Loadings.
… concrete (HSC and FRHSC) determined from SHPB tests, (ii) an experimental study on effect of high strain rate loadings on compressive behavior of the HSC and FRHSC, (iii) an experimental study on relative contribution to impact resistance by tensile strength in comparison to toughness of …
-
THE DYNAMIC BEHAVIOR OF POLYUREA COMPOSITES SUBJECTED TO HIGH STRAIN RATE LOADING
… using the Split Hopkinson Pressure Bar (SHPB) which is used to monitor the dynamics of the polyurea composites at different levels of strain rates. Close agreements are demonstrated between the theoretical predictions and the obtained experimental results. The properties of periodic …
-
Experimental study of the development of plastic solitary waves in one-dimensional granular media
… work, a modified split Hopkinson pressure bar (SHPB) is used to impact one-dimensional granular chain of spheres. These homogeneous chains used here comprise of brass, aluminum, or stainless steel spherical beads, ranging from a single sphere to a chain of fourteen, and are of interest because …
-
Development and applications of new peridynamic models
… propagations in split Hopkinson's pressure bar (SHPB) and was validated by the experiment results. The peridynamic model was then used for designing required shapers in SHPB application and greatly improves the experiment efficiency. Secondly, a two-dimensional model was proposed and verified by …
-
Development of Split-Hopkinson pressure bar apparatus for dynamic testing of nonlinear elastic metamaterials
… qualification of a split-Hopkinson pressure bar (SHPB) apparatus at the Applied Research Laboratories at the University of Texas at Austin (ARL:UT) with the intent of physically testing nonlinear elastic metamaterials—artificially-developed media that can manipulate stress waves in a way not seen …
Page 1 of 5