Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 99 for “"SINGLE HOLE"”.

  1. Single hole spins in silicon quantum dots

    Single hole spins in silicon quantum dots are emerging as a promising candidate for use in spin qubit applications. However, experimental studies of single-hole spins have been hindered by challenges in fabricating stable hole-based devices. Particularly, it has been challenging to define silicon …

    unsw Repository record for Single hole spins in silicon quantum dots (opens in a new tab)

  2. SYNTHESIS OF SINGLE-HOLE VIBRATION WAVEFORMS FROM A MINING BLAST

    … the PPV, one in particular is the signature hole technique. This technique is based on signals and systems theory and uses a mathematical operation called convolution to assess the waveform of the production blast. This technique uses both the vibration waveform of an isolated hole and the …

    uky-thes Repository record for SYNTHESIS OF SINGLE-HOLE VIBRATION WAVEFORMS FROM A MINING BLAST (opens in a new tab)

  3. Coherent optical control of the spin of a single hole in a quantum dot

    … coherent control, and readout of a single hole spin trapped in a self assembled InGaAs semiconductor quantum dot. High fidelity initialisation of a hole spin state is achieved by the fast ionisation of a spin polarised neutral exciton under an applied electric field and in a Faraday …

    whiterose Download PDF for Coherent optical control of the spin of a single hole in a quantum dot (opens in a new tab)

  4. An Experimental and Analytical Investigation on the Production of Microfibers Using a Single Hole Melt Blowing Process

    … on the production of microfibers using a single hole melt blowing process. included: The processing variables that were investigated air jet exit velocity, polymer throughput, die air gap, die setback, polymer and air temperatures, polymer melt viscosity as expressed by ASTM Melt Flow Rate …

    utk-theses Repository record for An Experimental and Analytical Investigation on the Production of Microfibers Using a Single Hole Melt Blowing Process (opens in a new tab)

  5. An experimental study of single hole spin qubit coherence in a GaAs/AlGaAs double quantum dot device

    … the spin coherence time T_2^* for the usage of a single hole pseudo-spin in GaAs, as opposed to a conduction-band electron. The “Introduction” section provides a brief overview of the history of the Loss-DiVincenzo spin qubit and the motivation to iterate upon its implementations in light of the …

    waterloo Repository record for An experimental study of single hole spin qubit coherence in a GaAs/AlGaAs double quantum dot device (opens in a new tab)

  6. Heat And Fluid Flow Characterization Of A Single-hole-per-row Impingement Channel At Multiple Impingement Heights

    … at various jet heights with one impingement hole per row. Temperature sensitive paint and constant flux heaters are used to gather heat transfer data on the target and side walls. Jet-to-target distance is set to 1, 2, 3, 5, 7 and 9 jet diameters. The channel width is 4 jet diameters and the …

    ucf Repository record for Heat And Fluid Flow Characterization Of A Single-hole-per-row Impingement Channel At Multiple Impingement Heights (opens in a new tab)

  7. Numerical inverse interpretation of pneumatic tests in unsaturated fractured tuffs at the Apache Leap Research Site

    … unsaturated fractured medium through analysis of singleand cross-hole pneumatic tests. Over 270 single-hole [Guzman et al., 1996] and 44 cross-hole pneumatic tests [Illman et al., 1998; Inman, 1999] were conducted in 16 shallow vertical and slanted boreholes in unsaturated fractured tuffs at the …

    arizona-thes Repository record for Numerical inverse interpretation of pneumatic tests in unsaturated fractured tuffs at the Apache Leap Research Site (opens in a new tab)

  8. The use of seismic techniques to identify hazardous ground conditions associated with cavities

    … The three methods are: surface, interborehole and a single hole method. The surface seismic method (refraction) was used successfully over a disused railway tunnel to identify the presence of a cavity, and a technique was developed to generate images of a theoretical model, which can be …

    middlesex Download PDF for The use of seismic techniques to identify hazardous ground conditions associated with cavities (opens in a new tab)

  9. An investigation into the web defect known as 'shot' in the melt-blowing process used to create non-woven fabrics

    … The die configuration was varied between a single hole die and a thirty hole die for both conventional and metallocene resins. Data was collected inorder to establish the individual effect of varying a single processing parameter on the production of shot. This data was then used to create …

    ut-knoxville Repository record for An investigation into the web defect known as 'shot' in the melt-blowing process used to create non-woven fabrics (opens in a new tab)

  10. Topological Conjugacy Relation on the Space of Toeplitz Subshifts

    … characterization on Toeplitz subshifts with single hole structure to be flip invariant.

    unt Repository record for Topological Conjugacy Relation on the Space of Toeplitz Subshifts (opens in a new tab)

  11. Investigations of Injectors for Scramjet Engines

    … array of two rows with two columns of flush-wall holes that induce vorticity and enhance mixing. For comparison, a single-hole circular injector with the same area angled downstream at 30 degrees was also examined. Test conditions involved sonic injection of helium heated to 313 K, to safely …

    vt Repository record for Investigations of Injectors for Scramjet Engines (opens in a new tab)

  12. Simulation of the generation and propagation of blast induced shock waves

    … blast vibration uses the signal produced from a single hole test shot to simulate the vibration that would be produced by a full-scale production blast. This simulation can be used to determine optimum hole timings to minimise the vibration generated at a point of interest. This thesis studies …

    whiterose Download PDF for Simulation of the generation and propagation of blast induced shock waves (opens in a new tab)

  13. Study on high subsonic turbulent flow incipient separation and hole/boundary layer interaction

    … caused by a ramp compression corner and a large single hole. These two problems were studied separately by wind tunnel experiments.</p><p>For flow over a two-dimensional ramp compression corner case, an experimental investigation to determine the incipient separation was carried out at Mach …

    ut-knoxville Repository record for Study on high subsonic turbulent flow incipient separation and hole/boundary layer interaction (opens in a new tab)

  14. Doping a topological quantum spin liquid: slow holes in the Kitaev honeycomb model

    <p>We present a controlled microscopic study of hole dynamics in both a gapped and a gapless quantum spin liquid. Our approach is complementary to previous phenomenological works on lightly doped quantum spin liquids as we introduce mobile holes into the ground state of the exactly solvable Kitaev …

    oxford Repository record for Doping a topological quantum spin liquid: slow holes in the Kitaev honeycomb model (opens in a new tab)

  15. Experimental study of restrictor noise in ventilation duct systems

    Single-hole restrictors are widely used in the aircraft air distribution system (ADS). The noise generated due to the flow passing over the restrictor is a main interior noise source of the cabin. Prediction of the restrictor noise generation is important for a quite ADS design.<br/><br/>This work …

    soton Download PDF for Experimental study of restrictor noise in ventilation duct systems (opens in a new tab)

  16. An Investigation into Multi-Point Peripheral Fuel Injection to Achieve Clean and Efficient Combustion in Diesel Engines

    … present challenges by replacing the multi-hole, centrally located injector used in conventional diesel combustion (CDC), with multiple, single-hole injectors placed around the periphery of the combustion chamber. The PeFI concept is designed to eliminate flame-wall and jet-wall interactions …

    alabama Repository record for An Investigation into Multi-Point Peripheral Fuel Injection to Achieve Clean and Efficient Combustion in Diesel Engines (opens in a new tab)

  17. An experiment investigation of processing parameters for the production of micro fibers using the melt blowing process

    … produced in the melt blowing process. The UTK single hole die melt blowing facility was used during this research and only 650 MFR polypropylene was utilized. Among the processing parameters that were investigated were the die geometry (air gap, setback, and air jet injection angle), polymer …

    ut-knoxville Repository record for An experiment investigation of processing parameters for the production of micro fibers using the melt blowing process (opens in a new tab)

  18. Internal Screw Reinforcement of Laminated Veneer Lumber (LVL) Beams With Multiple Holes

    … need to be facilitated, and oftentimes, multiple holes may be required in structural elements. Documented research involving previous studies on timber beams with opening are available for structural engineers. However, most literature focuses on sawn sections and glulam beams, with limited …

    auckland-ms Repository record for Internal Screw Reinforcement of Laminated Veneer Lumber (LVL) Beams With Multiple Holes (opens in a new tab)

  19. Emissions characterization of paired gaseous jets in a pilot-ignited natural-gas compression-ignition engine

    … to compare the effects on the emissions to a single-hole nozzle. Low-PM strategies and morphology of the soot were compared as well. Contrary to expectations, the tests showed large increases in CO and PM from all the paired nozzles at all modes compared to the single-holed injector. Changing …

    ubc Repository record for Emissions characterization of paired gaseous jets in a pilot-ignited natural-gas compression-ignition engine (opens in a new tab) Download PDF for Emissions characterization of paired gaseous jets in a pilot-ignited natural-gas compression-ignition engine (opens in a new tab)

  20. DEVELOPMENT OF BOSCH RATE OF INJECTION MEASUREMENT PROCEDURE AND RESULTS

    … for the HD fuels were obtained with an eight-hole high pressure common rail diesel Cummins XPI injector and electronic injection durations were successfully calibrated to provide a desired fuel quantity per injection. Single-hole ROI measurements were also made with a Cummins XPI injector …

    mtu Repository record for DEVELOPMENT OF BOSCH RATE OF INJECTION MEASUREMENT PROCEDURE AND RESULTS (opens in a new tab)

Page 1 of 5