Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 244 for “"SPAR"”.

  1. The Investigation of a Sample of Fluor Spar

    This investigation was offered as a senior thesis for the degree of Bachelor of Science, chemical engineering at the University of Kansas.

    ku Repository record for The Investigation of a Sample of Fluor Spar (opens in a new tab)

  2. Dynamic response of spar-type offshore floating wind turbines

    In recent years there has been a significant increase in the interest in floating offshore wind turbines from the wind energy industry, governments and academia. Partially driven by the recent nuclear disaster in Japan, but also by the lack or complete absence of shallow waters in various countries …

    strathclyde Repository record for Dynamic response of spar-type offshore floating wind turbines (opens in a new tab)

  3. Shallow Water Seafloor Geodesy: GPS on An Anchored Spar Buoy

    … system for this environment based on an anchored spar buoy topped by high precision GPS. Orientation of the buoy is measured using a digital compass that provides heading, pitch, and roll information. The combined orientation and GPS tracking data are used to recover the three-dimensional position …

    usf Repository record for Shallow Water Seafloor Geodesy: GPS on An Anchored Spar Buoy (opens in a new tab)

  4. Numerical simulation of the truss spar 'Horn Mountain' using COUPLE

    A truss spar, named as Horn Mountain, was deployed in the Gulf of Mexico in 1,650 m of water, approximately 150 km southeast of New Orleans in June 2002. Horn Mountain is operated by British Petroleum (B.P.). Extensive field measurements were made using an integrated marine monitoring system …

    tamu Repository record for Numerical simulation of the truss spar 'Horn Mountain' using COUPLE (opens in a new tab)

  5. Simulation of Launching and Self-Upending of a Spar Hull

    … and efficient plan for the installation of a spar using the barge launching method. Relative to the conventional method of installing spars, the barge launching method enables the elimination of some operations and therefore has the potential to reduce installation costs and schedule. Through …

    tamu Repository record for Simulation of Launching and Self-Upending of a Spar Hull (opens in a new tab)

  6. Spar Wind Turbine Behavior: Modeling and Comparison with Experimental Data

    … environments. Among all of the proposed designs, spar-type wind turbine appears to be a viable concept. The research work presented in this thesis utilizes two types of hydrodynamic numerical models to simulate the global motion response behavior. The first model developed in this study provides …

    tamu Repository record for Spar Wind Turbine Behavior: Modeling and Comparison with Experimental Data (opens in a new tab)

  7. Optimum Design of Composite Wing Spar Subjected to Fatigue Loadings

    … to failure. It is important to design the wing spars which carry the bending loads, to be fatigue resistant so that damage or expensive inspections could be avoided. Wing models were be made from composite materials with a NACA 0016 airfoil shape, chord length of 9.25”, and a span of 15.25”. The …

    calpoly Repository record for Optimum Design of Composite Wing Spar Subjected to Fatigue Loadings (opens in a new tab)

  8. Reliability analysis of a spar buoy-supported floating offshore wind turbine

    … water level. Of these alternative concepts, the spar buoy platform is a deep draft structure with a low center of gravity, below the center of buoyancy. Reliability analysis of a spar buoy-supported floating offshore 5MW wind turbine based on stochastic simulation is the subject of this study. …

    texas Repository record for Reliability analysis of a spar buoy-supported floating offshore wind turbine (opens in a new tab)

  9. Coupled Analysis of the Motion and Mooring Loads of a Spar "CONSTITUTION"

    A truss spar, named as 'Constitution' was installed in Gulf of Mexico located at 90.58' 4.8" West Longitude and 27.17'31.9" North Latitude. Since its installation in October 2006, it has weathered multiple hurricanes. After the installation, British Maritime Technology (BMT) installed an …

    tamu Repository record for Coupled Analysis of the Motion and Mooring Loads of a Spar "CONSTITUTION" (opens in a new tab)

  10. Modelagem e análise de uma turbina eólica offshore do tipo spar-buoy

    … of a coupled offshore system, consisting of a spar-buoy floating unit, a 5MW installed potential wind turbine and three catenary anchor lines in water depth of 320 meters. The fatigue study was performed only for the anchor lines considering eleven different unidirectional sea states. Dynamic …

    brazil-uerj Repository record for Modelagem e análise de uma turbina eólica offshore do tipo spar-buoy (opens in a new tab)

  11. Nondestructive evaluation of a carbon fiber wing spar using air-coupled ultrasound

    … of a carbon fiber reinforced composite main wing spar. Impact damage and foreign object inclusions have been inspected with all three methods. These methods have been shown to be successful in locating the test article defects. The determination of porosity levels from micrograph images is …

    iastate Repository record for Nondestructive evaluation of a carbon fiber wing spar using air-coupled ultrasound (opens in a new tab)

  12. Reliability analysis for mooring system of a spar in deepwater Gulf of Mexico

    Reliability analysis for the mooring system of a floating production system has been undertaken for sea depths of 1000, 2000, and 3000 m. A methodology has been developed for the estimation of the distribution of extreme values of storm loads on the mooring system during a storm event due to the …

    texas Repository record for Reliability analysis for mooring system of a spar in deepwater Gulf of Mexico (opens in a new tab) Restricted access

  13. Design and testing of an active aircraft wing spar with bending-torsion coupling

    … approach is based on the use of carbon composite spars with misaligned fibres. The second technique involves an active spar with a multi-cross section embedded with PZT actuators. A wing was designed and manufactured for testing in a wind tunnel and subsequently implemented on a demonstrator …

    uvic Repository record for Design and testing of an active aircraft wing spar with bending-torsion coupling (opens in a new tab)

  14. I-SPAR BUOY: DESIGN OF A LIGHTWEIGHT SHALLOW WATER AIR-SEA MEASUREMENT PLATFORM

    An Inner-shelf SPAR buoy (I-SPAR) for measuring atmospheric fluxes was developed for use in 7–20 m water depth as part of the ONR Coastal Land Air Sea Interaction (CLASI) effort. The design requirements are: 1) measurements obtained above the wave boundary layer (>4 m above sea level), 2) …

    nps Repository record for I-SPAR BUOY: DESIGN OF A LIGHTWEIGHT SHALLOW WATER AIR-SEA MEASUREMENT PLATFORM (opens in a new tab)

  15. Dynamic analysis of a spar-type offshore floating wind turbine and its mooring system

    … floating wind turbine (OFWT) supported by a spar platform and held in place with three mooring lines. It is important to study the dynamic responses of the floating platform and the mooring system behaviour so that the OFWT can be designed and constructed safely and economically and generate …

    strathclyde Repository record for Dynamic analysis of a spar-type offshore floating wind turbine and its mooring system (opens in a new tab)

  16. Control of the Spar-buoy Based Wind Turbine Floating Platform Through Mooring Line Actuation

    … through mooring actuation. First, an OC3- Hywind spar-buoy floating platform is modeled utilizing the Control-oriented, Reconfigurable, and Acausal Floating Turbine Simulator (CRAFTS) with a specific focus on predicting hydrodynamic and mooring line loads while intentionally excluding …

    ucf Repository record for Control of the Spar-buoy Based Wind Turbine Floating Platform Through Mooring Line Actuation (opens in a new tab)

  17. Iterative determination of spar lines static equilibrium and improved dynamic modeling by fractional derivatives

    Polyester mooring systems are used as permanent systems of floating production systems and offshore structures. Compared to other mooring systems, polyester has a highly non linear behavior, thus complicating the overall design. Three important parameters affect the polyester rope stiffness; the …

    rice Repository record for Iterative determination of spar lines static equilibrium and improved dynamic modeling by fractional derivatives (opens in a new tab)

Page 1 of 13