Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 37 for “"SPICE model"”.
-
SPICE model struktury LDMOS
… výzvy, které tato struktura přináší do oblasti modelování a charakterizace jsou popsány v první kapitole. Další část této práce se zaměřuje na existující možné přístupy v charakterizaci LDMOS struktury, které se používají v polovodičovém průmyslu. V druhé kapitole je také popsána BSIM …
-
ESD circuit synthesis and analysis using TCAD and SPICE
This thesis describes the development of a SPICE sub-circuit model for an avalanche triggered SCR used for ESD protection in integrated circuits. The purpose of this work was to develop a model that accurately predicts the terminal characteristics of the SCR operating under steady state and …
-
Cable analysis for electromagnetic compatibility issues
… the second paper, a method for creating a simple SPICE model is proposed such that the SPICE model allows prediction of radiated emissions in component level tests. The radiation from the ground connections between the cables and return plane dominates over the radiation from the horizontal …
-
MOSFET Modeling, Simulation and Parameter Extraction in 4H- and 6H- Silicon Carbide
<p>This thesis presents the work on analytical modeling and simulation of a silicon carbide (SiC) power MOSFET, model verification with test data, and device characterization and parameter extraction of the SPICE model. The development of temperature models for a lateral as well as a vertical …
-
Simulation of SiC MOSFET Power Converters
… carbide MOSFET enhancement to the circuit. The modeling for silicon and silicon carbide MOSFET was created using the spice model provided from leading electronics companies as ROHM, CREE and INFINION. This spice model is provided by these companies to examine the effect of these components. This …
-
CMOS Propagation Delay Change Using Laser Die Probing
… or slowing the response of the inverter. A model has been developed that uses the MOSFET large signal equations to predict the behavior of the CMOS inverter in the presence of illumination. The illumination is modeled as an equivalent current source placed across the output. SPICE …
-
Subcircuit MOSFET model with channel conductance correction for analog simulation
A subcircuit MOSFET model is presented which makes use of the Analog Behavioral Modeling (ABM) feature of Microsim's PSpice to improve the channel conductance of a SPICE model provided by a commercial semiconductor foundry. The subcircuit consists of the provided SPICE model and a channel …
-
Large-signal spice models for heterojunction bipolar transistors and lasers
Large-signal SPICE models for heterojunction bipolar transistors (HBTs) and semiconductor lasers are developed. For a general graded-base double heterojunction bipolar transistor (DHBT), a Full Ebers-Moll model and its simplified versions for specific HBTs have been derived from DAPHNE, a and …
-
Modeling of gallium nitride transistors for high power and high temperature applications
… of GaN-based power transistors, proper device modeling is essential to verify its operation and improve the design efficiency. In this view, this research work presents modeling and characterization of GaN transistors for high power and high temperature applications. The objective of this …
-
Load-pull measurement and simulation on indium phosphide heterojunction biopolar transistors
… Class C/E bias conditions. Simulations using a SPICE model confirmed the accuracy of the model at 10 GHz with simulated efficiencies between 44-58%.
-
Semiconductor Device Modeling, Simulation, and Failure Prediction for Electrostatic Discharge Conditions
… major reliability issues in IC industry. Device modeling for ESD conditions is necessary to evaluate ESD robustness in simulation. Although SPICE model is accurate and efficient for circuit simulations in most cases, devices under ESD conditions operate in abnormal status. SPICE model cannot …
-
Designing, Building and Testing a Solar Thermoelectric Generation, STEG, for Energy Delivery to Remote Residential Areas in Developing Regions
… To this end, the entire system was built, modeled, and then validated with LTspice simulator software via thermal-to-electrical analogy schemes. Valuable data in conjunction with two novel LTspice circuits were obtained, showing the achievability of analyzing transient heat transfer with …
-
Modeling and Simulation of 1700 V 8 A GeneSiC Superjunction Transistor
The first-ever 1.7kV 8A SiC physics-based compact SPICE model is developed for behavior prediction, modeling and simulation of the GeneSiC “Super” Junction Transistor. The model implements Gummel-Poon based equations and adds a quasi-saturation collector series resistance representation from a 1.2 …
-
Modeling, development and evaluation of SiC MOSFET based PWM inverter
A dynamic RC-network equivalent thermal model is constructed to analyze the behavior of a three-phase pulse-widthmodulated (PWM) voltage source inverter using silicon carbide MOSFETs (SiC MOSFET) as the switching devices. A Spice model containing parasitic parameters is introduced to evaluate the …
-
Spice modeling and simulation of silicon-carbide power modules
The design of power converters relies on computer modeling to accurately predict system electrical and thermal behavior prior to implementation. In the field of wide bandgap semiconductors, the extraordinarily high switching speed of silicon-carbide devices dictates that traditionally …
-
CAD model extraction of PCB signal discontinuity using a circuit extraction approach based on mixed-potential integral equation formulation
… signal integrity issue. Efficient and accurate models for via transitions are necessary to analyze high bit-rate digital circuit system. The circuit extraction approach based on a mixed-potential integral equation formulation (CEMPIE) is an extension of the Partial Element Equivalent Circuit …
-
Analysis and Modeling of Parasitic Capacitances in Advanced Nanoscale Devices
… accurately extracted and are consistent with the SPICE models. Although 3D device simulation can be used to extract such parasitics, it is expensive and does not consider the effects of nearby interconnect and devices in a layout. Conventional rule-based layout parasitic extraction (LPE) tools …
-
Development and application of an empirical thyristor type switch model for pulse generator simulation
… results is dependent on the accuracy of the models used to describe the nonlinear components in the circuit. To this end, an empirical SPICE model is developed for Silicon Power's CCS SC 14N40 thyristor-type switch. The development of the model is detailed, and SPICE simulations of the model …
-
Model Development and Assessment of the Gate Network in a High-Performance SiC Power Module
… order to accomplish this goal, a highly accurate model of the gate network is developed through three methods of parameter extraction: calculation, simulation, and measurement. A SPICE model of the gate network is developed to analyze four electrical issues in a high-speed, SiC-based power module …
-
Novel dual-threshold voltage FinFETs for circuit design and optimization
… using the physics-based University of Florida SPICE model for double-gate devices, and the optimized FinFETs are simulated and validated using Sentaurus TCAD simulations. Dual-14, FinFETs with independent gates enable series and parallel merge transformations in logic gates, realizing compact …
Page 1 of 2