Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 19 of 19 for “"SS 316L"”.
-
Investigation of the Selective Laser Melting of WC-Reinforced SS 316L Composites
… carbide (WC) and laser power on the processing, structure, properties, and mechanical performance of WC-reinforced SS 316L composite materials, additively manufactured via Selective Laser Melting (SLM) - the primary objectives are to improve its wear resistance and bending performance. …
-
The Effect of Geometric Defects and Porosity on the Mechanical Behavior of Additively Manufactured SS 316L and AlSi10Mg Components
… were intentionally manufactured into SS 316L and AlSi10Mg AM tubular tensile specimens to investigate and improve the understanding of the ductility-defect-porosity relationship of AM Metals. SS 316L and AlSi10Mg compression specimens were tested from different build heights and …
-
New approaches to improving structural integrity in binder jetting printing (BJP) process and developing advanced applications by combining BJP and powder metallurgy techniques
… over the other additive manufacturing (AM) processes to directly build 3D parts. Some of the advantages of BJP include printed parts free of residual stresses, a less amount of labor, without the starting build plate, and a higher powder reusability. However, the BJP technology has been adopted …
-
Impact of cellular dislocation structures produced by additive manufacturing on neutron irradiation damage evolution in stainless steel 316L
… both well researched additive manufacturing processes that build three-dimensional structures layer-by-layer from computer-aided-design models. The nuclear industry is exploring additive manufacturing technologies for reactor internal applications in order to enhance performance, reduce economic …
-
Development of Electrochemical Micro Machining
… voltage pulses and closed loop control. Stainless steel SS-316L and copper alloy CA-173 were chosen as the workpiece materials. A model was developed for material removal rate. The research studied the effect of various parameters such as voltage, frequency, pulse ON/OFF time, and delay between …
-
Feasibility and Impact of Liquid/Liquid-encased Dopants as Method of Composition Control in Laser Powder Bed Fusion
… – constructs geometry that would not be possible using standard manufacturing techniques. This geometric versatility allows integration of multiple components into a single part. While this practice can reduce weight and part count, there are also serious drawbacks. One is that the LPBF …
-
FAILURE PREDICTION AND STRESS ANALYSIS OF MICROCUTTING TOOLS
… carbide (Ø1.016 mm dia., 2 flute) tool on SS-316L material. Tool runout measured using a laser was found to be less than 1 µm and tool deflection at 25000 rpm was 20 µm. Finite element analysis (FEA) predicts tool failure due to static bending for a deflection greater than 99% of tool …
-
The Effect of Lead on Dealloying and Stress Corrosion Cracking (SCC) of Ni-Cr-Fe Alloys in Boiling Caustic Environments
304L stainless steel (SS) samples were exposed to a highly caustic 50 wt.% NaOH environment at or near the boiling temperature (135-140 °C) in reducing conditions to study dealloying. Flat samples were used for electrochemical measurements, and SS 316L was used in some tests to evaluate the effect …
-
Molecular dynamics simulation of TWIP-TRIP alloys: plastic deformation mechanisms and machine-learning assisted alloys design
… these phenomena allows achieving a high stiffness and/or a targeted balance between strength and ductility. Such high stiffness and strength materials can be utilized for energy saving, energy absorption, and biomedical applications. These alloys generally are capable of high stress and strain …
-
Evaluation and Optimisation of the Small Ring Test and its Amalgamation with the Small Punch Test
… of conventional mechanical testing methods and assesses two miniaturised specimen testing techniques: the small ring test (SRT) and the small punch test (SPT).<br></br><br></br> Given the nascency of the SRT, especially as a tensile test, this thesis rigorously assesses the SRT for 48 pin …
-
Comprehensive Analytical Modeling of Laser Powder-Bed/Fed Additive Manufacturing Processes and an Associated Magnetic Focusing Module
… of as-built components through fast process optimization or feedback-control-based adaptive processing adjustment, high fidelity and calculation-efficient processing model is urgently needed. The thesis research has been motivated by the need for time-efficient process models of both …
-
Prediction of Part Quality in Laser Powder Bed Fusion Metal Additive Manufacturing
… porosity, balling phenomenon, and surface roughness. The temperature distributions in the products in the conduction and keyhole melting modes are predicted by analytical thermal models with closed-form solutions, with the consideration of laser power input, melting mode-dependent laser …
-
Laser Deposition Additive Manufacturing of Multi-Material and Metal-Ceramic Composite Structures
… with the imperative for decarbonization, necessitate a fundamental rethinking of metallic component design and manufacturing. Traditional materials, with their inherent limitations in property optimization, susceptibility to degradation, and weight constraints, are proving insufficient. …
-
Monitoring and Control of Metal Additive Manufacturing Processes Using Ultrasound
… and Directed energy deposition (DED) are two classes of additive manufacturing (AM) that are widely used to fabricate metal components. In these processes, metal powder or wire and a heat source are applied to form a moving melt pool, followed by solidified tracks to form the component in a …
-
Development of bioactive surfaces for bone ingrowth on dental implants
… to form a strong chemical bond with living tissue, known as bioactivity, is one of the drawbacks of Ti dental implants. Consequently, the use of dental implants is sometimes accompanied by failure due to periimplantitis disease and, subsequently, poor aesthetics when soft-hard tissue margin …
-
Pitting corrosion behaviour of CRAs in CO2 and CO2/H2S-containing environments using cyclic polarisation technique
… are one method to combat the environmental stresses associated with these aggressive environments, including high H2S content. An understanding of the operating performance for these materials under demanding conditions has to be determined in order to reduce failures, improve corrosion …
-
Integration of Insoluble and Soluble Dopants into Steel Using Laser Powder Bed Fusion
… properties and require little post-processing. While LPBF allows for creative designs to reduce weight and part count by integrating sub-components of assemblies, designers are limited to one material within any LPBF print. Although various materials can be used in LPBF, metals are of …
-
Correlating microstructure with the corrosion properties of Aluminum and Stainless Steel alloy
… 5456 and additively manufactured (AM) stainless steel 316L. Corrosion experiments combined with EBSD analysis were used to determine the microstructure influence on β phase precipitation and intergranular corrosion in Al5456 alloy. This combined approach facilitates the rapid characterization …
-
Analyses of Property-Graded Stainless Steel 316L Bulk Structures Processed by Selective Laser Melting
… goal of this research is to investigate the processing, structure, properties, and performance of (mechanical) property-graded bulk structures made from a single metallic alloy via a laser powder bed fusion (LPBF) process. With a vision to realize repeatable/reproducible functionally-graded …