Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 32 for “"SS316"”.
-
EDX investigation of evaporative losses during the EB melting of SS316
… losses during the EB (electron beam) melting of SS316 have been studied via x-ray analysis. A technique based on EDX has been developed to acquire, process, and interpret x-ray spectra in the UBC EB melting furnace. The present work consists of a series of experiments which correlate evaporative …
-
SURFACE PROPERTIES AND INTERACTIONS OF P. AERUGINOSA AND B. SUBTILIS WITH STAINLESS STEEL SS316 AND THEIR RELATION IN BIOFILM DEVELOPMENT
Biofilm is ubiquitously found in a broad range of areas, such as in food, environmental, and biomedical fields, and is generally considered a major problem in the industries. It is important to determine the factors that influence cell adhesion onto surfaces that would initiate biofilm formation. …
-
Biofilm formation and its induced biocorrosion of metals in seawater
… bacterial cells. Biocorrosion behavior of SS316 by the two SRBs was investigated by analyzing the biofilm and pit morphology using AFM. Electrochemical impedance spectroscopy (EIS) results were interpreted with an equivalent circuit to model the physicoelectric characteristics of the …
-
Investigation of Oxidation and Corrosion Resistance of Ni-based Alloys and Stainless Steels Under CO2 Environments at Elevated Temperatures
… oxidation and corrosion resistance of IN625 and SS316 in a high-temperature environment, this thesis work investigates the oxidation and corrosion mechanisms of SS316 and IN625 when subject to isothermal oxidation at 750 °C under CO2 and air environments. When exposed to an oxidative environment, …
-
CORROSION DAMAGE STUDIES THROUGH MICROSCOPY AND STRESS ANALYSIS
… between pits and stresses in AA2024 and SS316 alloys under different types of loading. Corrosion experiments were carried out on both alloys samples for a fixed time interval and were imaged on optical and AFM. The optical microscope provided the information on forms of corrosion expected …
-
The Validity of Using High Resolution Digital Image Correlation to Investigate the Influence of Stacking Fault Energies on Deformation Mechanics
… of stacking fault energy, stainless steel 316 (SS316), INVAR and pure nickel. The samples were prepared to be tested in both <i>in situ</i> neutron diffraction tensile tests and <i>in situ</i> HR-DIC tensile tests, with post-mortem EBSD analysis performed on the neutron diffraction samples to …
-
Nanostructured Transition Metal Oxides for Electrochemical CO2 and Methane Conversion
… Fabricated on various substrates (Cu foil, SS316, carbon paper) and characterized by SEM, their electrochemical performance was evaluated via cyclic voltammetry. Cu-Co oxide showed superior CO₂ reduction, leveraging the strengths of individual oxides. Co₃O₄ exhibited higher current densities …
-
Efficacy and impact of sanitizers in controlling pathogenic bacteria on irrigation water
… corrosion capacity on stainless steel (SS304, SS316) and aluminum (AL3004) coupons, as well as their effects on soil and plant health (romaine lettuce) under greenhouse conditions. Chlo at 60 ppm, SAS at 0.60%, and PAA at 30 ppm achieved a 3-log reduction, with no viable cells after enrichment, …
-
Methodologies for Improvement of Metal Fatigue Life
… intervals. To extend the fatigue life of SS316 specimens, the effect of a coating is investigated using both Cr-coated and uncoated specimens. Scanning electron microscopy is used to understand the mechanism of crack initiation in both types of specimens. Results show longer fatigue life …
-
Validation of Transmission Densitometry for Holdup Characterization in Salt-Wetted MSR Components
… exchanger composed of stainless-steel alloy 316 (SS316). This technique is shown to be sensitive to detecting density changes in a pipe segment and heat exchanger due to FLiNaK(+EuF3) holdup inside of each component using the relationship between the transmission source energies, the attenuation …
-
Corrosion Evaluation for Absorption - Based CO2 Capture Process Using Single and Blended Amines
… steel (CS1018) and stainless steels (SS304 and SS316) in the CO2 capture process, using various types of CO2 absorption solvents. The tested solvents included MEA, DEA, MDEA, AMP, PZ, and their blends. A series of laboratory corrosion tests was carried out using electrochemical techniques …
-
Microstructural Engineering and Deformation Mechanisms in an Additively Manufactured Metastable Beta Ti-5Al-5Mo-5V-3Cr Alloy
… was achieved using solute additions of SS316 to DEDed Ti-5553.
-
Failure Simulations at Multiple Length Scales in High Temperature Structural Alloys
… material (nickel based superalloy A617, SS316 etc.) at elevated temperatures. This methodology will be applied in numerous finite element simulations. By comparing with simplified method test data, the feasibility of EPP methodology at elevated temperatures can be verified.</p>
-
Characterizing Thermal Gradients in Solid Oxide Fuel Cells Using a Phenomenon-In-Loop Simulation Approach
… analog consists of a metal additive-manufactured SS316 stainless steel plate housing nineteen air flow channels of 2 mm × 2 mm cross-section, sixteen independently addressable Rauschert ceramic heaters capable of sustained operation above 750 °C, and a Type-K thermocouple array embedded directly …
-
Control and understanding of the formation of micro/nanostructured metal surfaces using femtosecond laser pulses
… of metal surfaces, specifically nickel and SS316, was carried out using femtosecond laser pulses. By varying the fluence (between 0.01 and 3.18 J/cm2), and pulse count (between 1 and 20,000 pulses) incident on the metal surface, a number of surface morphologies were produced. It was …
-
Electrochemical Deposition of Terbium from Molten Salts
… and either tungsten or stainless steel 316 (SS316) served as the cathodes. Terbium was successfully deposited in all the scenarios, but the current efficiencies varied depending on the process variables. Spectroscopic techniques were used to qualitatively confirm terbium electrodeposition, …
-
Characterization of bending fatigue mini-specimens for nuclear materials
… These Krouse-type were made of austenitic SS304, SS316, HT9 ferritic martensitic steel, and Incoloy alloy MA956 oxide dispersion strengthens (ODS). A comparison between the mini-specimens and the standard specimen ASTM B593 had similar design but a smaller size. The bending fatigue machine VSS-40H …
-
Studies on Particle-Wall Interactions in Particle-based High Temperature Concentrating Solar Thermal Systems
… of four candidate alloys, stainless steel 316 (SS316), Incoloy 800H, Haynes 230, and Inconel 718 (In718), is evaluated in a moving bed of dense sintered bauxite particles (CARBO HSP 40/70) at room temperature, 700 °C, and 800 °C. The iron-based alloys exhibit relatively stable abrasion behavior …
-
High-temperature corrosion study of alloys in molten MgCl₂-KCl eutectic salt
… Incoloy 800H (800H), and Stainless Steel 316 (SS316) in MgCl₂-KCl molten salt at high temperature. First of all, the corrosion rates of different alloys are determined by performing the long-term static corrosion experiments. The morphologies of the surface and corrosion depths are examined by …
-
INVESTIGATION OF DIAMOND COATINGS ON IRON BASED MATERIALS BY MICROWAVE PLASMA CHEMICAL VAPOR DEPOSITION
… interlayers were deposited on ferrous alloys (SS316 and Kovar: FeNiCo) to enhance diamond deposition. The deposition was carried out in a microwave plasma chemical vapor deposition (MPCVD) reactor using a CH4-H2 mixture. The obtained samples were characterized using X-ray diffraction (XRD), …
Page 1 of 2