Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 52 for “"SS316L"”.
-
Control of Corrosion on SS316L Using Surface Initiated Polymers
… To provide a corrosion-resistant surface on SS316L, films of poly(styrene), poly(methyl acrylate), and poly(methyl methacrylate) were formed using surface-initiated atom transfer radical polymerization (SI-ATRP). The resulting hydrophobic polymer films had a fractional coverage of up to 99% …
-
Investigating the Influence of Surface Finishing Methods on Corrosion of Additively Manufactured SS316L
… As a result, successful LPBF printing of SS316L has been established. The second effort aimed to gain a better understanding of the corrosion properties of AM SS316L and how the printing process and post-printing surface finish impacts relative corrosion rates and potentials. Using an Open …
-
Corrosion film solubility and suspended particle behaviour of corroding SS316L surfaces in simulated nuclear plant coolant
… rig built entirely from 316L stainless steel (SS316L) was used to study dissolution and particulate release behaviour of corrosion films on SS316L surfaces in simulated PWR primary coolant. Coolant of pH25C 9-11 was prepared using LiOH in nitrogen-sparged ultrapure water, and pumped at 0.1-2 …
-
Evaluation of Laser Power, Heat Treatment, and Wall Configuration of SS316L and ER70S-6 Structures Fabricated by Wire Laser Metal Deposition
… of W-LMDfabricated ER70S-6 mild steel and SS316L stainless steel bimetallic walls. Two wall configurations were evaluated: a conventional horizontal configuration consisting of a single interface between the two materials, and a side wall configuration composed of parallel interfaces …
-
Modification of stainless steel surfaces for advanced functionalities
… anti-bacterial properties. Stainless steel 316L (SS316L) is one of the most widely using stainless steels, and thereby modification of SS316L surface is of great practical relevance. Electrochemical etching was employed to modify SS316L surface, and a correlation between the applied anodic …
-
Laser Powder Bed Fusion of Bimetallic Structures
… work reports the crack-free fabrication of an SS316L/IN718 bimetallic structure via LPBF, along with compositional redistribution, phase transformations and microstructural development, and nanohardness variations. Constituent intermixing after LPBF was quantitatively estimated using …
-
A Study on Stainless Steel 316L Annealed Ultrasonic Consolidation and Linear Welding Density Estimation
… suitability of Stainless Steel 316L annealed (SS316L annealed) as a building material for Ultrasonic Consolidation (UC), including research on Linear Welding Density (LWD) estimation on micrographs of samples. Experiment results are presented that include the effect of UC process parameters on …
-
Failure Mechanisms in Additively Manufactured Ferrous Metals Under Dynamic Loading Conditions
… of local microstructure in Stainless Steel 316L (SS316L), through both the intentional control of fabrication process and as a byproduct of processing, in determining the spall behavior of AM materials and seeks to understand both spatially and temporally the heterogeneous failure modes which may …
-
Synthesis and Characterization of Hard Cr2O3 and Superhard Cr-Zr-O PVD Coatings
… to deposit Cr-O and Cr-Zr-O coatings on silicon, SS316L, WC-Co, and HSS M42 substrates. The effects of deposition temperature, chemical composition, and subsequent heat treatment on microstructural, thermal stability, and mechanical properties of both Cr-O and Cr-Zr-O coatings were investigated. …
-
Synthesis and Characterization of Hard Cr2O3 and Superhard Cr-Zr-O PVD Coatings
… to deposit Cr-O and Cr-Zr-O coatings on silicon, SS316L, WC-Co, and HSS M42 substrates. The effects of deposition temperature, chemical composition, and subsequent heat treatment on microstructural, thermal stability, and mechanical properties of both Cr-O and Cr-Zr-O coatings were investigated. …
-
Multi-Scale Synchrotron X-ray Diffraction of Welded and Additively Manufactured Components
… in welded and LPBF stainless steel 316L (SS316L), analyzed through fitPyk. Berkovic nanohardness mapping of the welded SS316L was used to inform a combined Taylor Law/Hall-Petch model, predicting yield stress from dislocation density, coherent domain size, and base yield strength. Results …
-
Evaluating Processing–Property Relationships in Metallic Alloys and Metal-Ceramic Composites Fabricated with Direct-Write Technique
… of metallic alloys such as non-reactive SS316L, reactive Ti6Al4V, high entropy alloy Fe38.5Mn20Co20Cr15Si5Cu1.5 and Ti6Al4V-B4C metal-ceramic composite. Slurries with optimum rheology were developed for printing the alloys, and processing was carried out using pressureless-solid state …
-
INVESTIGATIONS ON THE CORROSION RESISTANCE OF METALLIC BIPOLAR PLATES (BPP) IN PROTON EXCHANGE MEMBRANE FUEL CELLS (PEMFC) - UNDERSTANDING OF THE EFFECTS OF MATERIAL, COATING AND MANUFACTURING
… applications. In this study, Ti, Ni, SS304, SS316L, and SS 430 blanks, and BPPs comprised of SS304 and SS316L were examined in terms of the corrosion behavior. SS316L plates were coated to investigate the effect of coatings on the corrosion resistance performance. Stamping and hydroforming as …
-
Electrochemical Degradation Behavior of Supermartensitic and Additively Manufactured Stainless Steels in CO2 and H2S Saturated Salt Brines for Oil and Gas Applications
… selective laser melted stainless steel 316L (SLM SS316L) was evaluated due to its corrosion resistance and practicality for producing custom-fit components that are easily accessible on-site. Unlike conventional steels, the inclusions in additively manufactured counterparts did not influence the …
-
Corrosion Inhibition of Piperazine for Potash Solution Mining and Processing Plants
… steel (CS1018), J55 steel and stainless steel (SS316L) as well as to evaluate inhibition performance of PZ in saturated potash brines under the test conditions of 0 – 3880 rpm rotational speed, 25 – 85oC brine temperature and 1 – 5 bar pressure. Results show that CS1018 and J55 were much more …
-
Mechanical Properties and Microstructure Characteristics of Alloy Parts Produced by Laser Powder Bed Fusion (LPBF) Method
… of metal alloys, including stainless steel 316L (SS316L), titanium alloy (Ti-6Al-4V), and high entropy alloy (HEA), which are all prepared by the LPBF method. Tensile and fatigue tests are conducted on multiple groups of SS316L samples to reveal the mechanical properties which are also compared …
-
Degradation of Structural Alloys in Molten LiCl-Li2O-Li
… of Li2O and Li. Stainless Steel 316L (SS316L) was studied since the current containers for engineering scale oxide reduction processing are constructed of this material. Inconel 625 (I625) was also studied as an alternative to SS316L due to its high temperature corrosion performance in …
-
Návrh vapa s funkcí řízení teploty
… využito teplotního koeficientu odporu materiálu SS316L, ze kterého je tvořená topná spirála. Je zde možnost na 7segmentovém displeji pomocí tlačítek zobrazit napětí baterie, odpor spirály, nastavit výkon a případně teplotu požadovanou teplotu spirály. Pro měření odporu, na kterém je založena …
-
Nitrogen Ion Bombardment of Fuel Cladding Materials
… by a fluence of 5E17 N/cm2, both pure Fe and SS316L are saturated and that by a fluence of 1E18 N/cm^2, both zirconium and zircaloy-4 are saturated. By 300°C in both Fe and SS316L and 600°C in zirconium and zircaloy-4, metastable nitrides have become unstable and nitrogen begins to diffuse …
-
High resolution characterisation of H on stress corrosion cracking in nuclear materials
… tested in every chapter, these include SS316L (12%- Ni), A800 (32%-Ni) and A600 (72%-Ni) as they represent commercially available alloys with low, intermediate and high nickel contents. Room temperature micromechanical testing has been used to compare the mechanical properties of …
Page 1 of 3