Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 50 for “"STARCCM+"”.

  1. A Non-Reacting Passive Scalar Comparison of StarCCM and OpenFOAM in a Supersonic Cavity Flame Holder

    … and Large Eddy Simulation solvers in StarCCM. In addition, OpenFOAM utilized the sonicFOAM solver to perform simulations. The simulations were based on the Air Force Research Lab, AFRL, scramjet testing model. To assess the accuracy of the simulation results, it is crucial to validate …

    sdstate Repository record for A Non-Reacting Passive Scalar Comparison of StarCCM and OpenFOAM in a Supersonic Cavity Flame Holder (opens in a new tab)

  2. Free Surface Effects on Horizontal Hydrofoils

    … the Computational Fluid Dynamics (CFD) software StarCCM+. This is investigated by running simulations for different depths of submergence, angles of attack and Froude numbers. The results of the simulations are studied by producing plots of the lift forces, drag forces, wave patterns and …

    chalmers Repository record for Free Surface Effects on Horizontal Hydrofoils (opens in a new tab)

  3. Theoretical and numerical research on sediment transport in pressurized flow conditions

    … this study, the commercial CFD codes, FLOW3D and STARCCM+, are adopted to simulate pressure scour under a bridge deck with six girders. Several limitations for FLOW3D are found during its application of sediment transport model: (a) the scour model is sensitive to the vertical cell size on the …

    nebraska Repository record for Theoretical and numerical research on sediment transport in pressurized flow conditions (opens in a new tab)

  4. An Assessment of the CFD Effectiveness for Simulating Wing Propeller Aerodynamics

    … a Reynolds-Averaged Navier-Stokes (RANS) method, StarCCM+, and a vortex lattice method (VLM), VSP Aero. Two configurations that are analysed are 1) WIPP Configuration (Workshop for Integrated Propeller Prediction) 2) APROPOS Configuration. For WIPP, computational results are compared with measured …

    vt Repository record for An Assessment of the CFD Effectiveness for Simulating Wing Propeller Aerodynamics (opens in a new tab)

  5. Aerodynamics investigations and optimization of a simplified pick-up truck with wind tunnel and CFD testing

    … fluid dynamics (CFD) simulations in StarCCM+. The primary objective is to understand and investigate the aerodynamic behavior of the generic pickup truck and design new attachments for the pickup truck on the trailer. Based on existing knowledge, design optimization techniques were …

    chalmers Repository record for Aerodynamics investigations and optimization of a simplified pick-up truck with wind tunnel and CFD testing (opens in a new tab)

  6. Development of a Molten Salt Reactor Design and Design Framework for Overall Reactor Performance Prediction and Optimization

    … limits. This design was rigorously tested using STARCCM+ for fluid dynamics modeling and RELAP5-3D for verification, demonstrating the MSMR's capability for safe operation under steady-state and transient conditions. This dissertation also presents a novel ML-based optimization framework. Given …

    byu Repository record for Development of a Molten Salt Reactor Design and Design Framework for Overall Reactor Performance Prediction and Optimization (opens in a new tab) Download PDF for Development of a Molten Salt Reactor Design and Design Framework for Overall Reactor Performance Prediction and Optimization (opens in a new tab)

  7. Developing a numerical swallowing simulation

    … of the dataset. Two numerical methods, STARCCM+ and Moving Particle Semi-Implicit (MPS), are employed to analyse the data and provide meaningful numerical data (i.e. pressure, velocity) to doctors. Important results, such as the volume fractions of the bolus, are derived which provides …

    bristol Repository record for Developing a numerical swallowing simulation (opens in a new tab) Download PDF for Developing a numerical swallowing simulation (opens in a new tab)

  8. Studie příčného rychlostního pole v blízkosti rotujícího kola s uvažováním vlivu nucené konvekce kotoučové brzdy

    … se o výpočtovou práci provedenou v programu StarCCM+. V první části práce jsou popsány základní rovnice a postupy využité pro výpočetní modelování a poznatky v dané oblasti. V druhé části je ukázáno, jakým způsobem byly nastaveny parametry disků, vybrána geometrie a dále také popsán proces …

    brno-tech Repository record for Studie příčného rychlostního pole v blízkosti rotujícího kola s uvažováním vlivu nucené konvekce kotoučové brzdy (opens in a new tab)

  9. Framtagning och utprovning av modell för vertikalaxlat vindkraftverk

    … Vindtunneltester och datorsimuleringar i StarCCM+ skulle visa effektiviteten av vindkraftverket vid specifika vindhastigheter och modellens generella prestanda jämfört med teoretiska beräkningar med strömningsmekaniska ekvationer. Resultaten från dessa gav en högst uppmätta …

    chalmers Repository record for Framtagning och utprovning av modell för vertikalaxlat vindkraftverk (opens in a new tab)

  10. Konceptuell design av ett supersoniskt smygflygplan: En studie av samspelet mellan aerodynamisk prestanda och låg radarsignatur

    … annat handberäkningar och CFD-beräkningar i StarCCM+ samt modelleringar i OpenVSP. För att kunna utveckla ett supersoniskt flygplan med smygegenskaper har hänsyn till smygtekniska designprinciper såsom svepta ytor och kantanpassning tagits. Samtidigt har dessa designval analyserats utifrån …

    chalmers Repository record for Konceptuell design av ett supersoniskt smygflygplan: En studie av samspelet mellan aerodynamisk prestanda och låg radarsignatur (opens in a new tab)

  11. Ice accretion in cryogenic heat exchangers. Dimensioning, building, testing and validating a heat exchanger rig for freezing condensate for various future aircraft engine applications

    … During the assembly of the rig, simulations in StarCCM+ were conducted, where icing effects were investigated using a multiphase model. The temperature drop used to dimension the heat exchanger was later compared to the observed results from the tests. The test results were visually compared to …

    chalmers Repository record for Ice accretion in cryogenic heat exchangers. Dimensioning, building, testing and validating a heat exchanger rig for freezing condensate for various future aircraft engine applications (opens in a new tab)

  12. Study of natural convection instabilities in closed cavities with non-isothermal walls

    … using the commercial CFD code Simcenter StarCCM+ in order to numerically predict the experimentally observed unsteady natural convection flows. The experimentally imposed thermal boundary conditions were used as inputs for the CFD models. The accuracy of these CFD models in predicting …

    washington Repository record for Study of natural convection instabilities in closed cavities with non-isothermal walls (opens in a new tab)

  13. Optimal Integrated CFD-GNC Model for Drag-Based Reentry Dynamics

    … Dynamics (CFD) simulations, specifically using StarCCM+. The aerodynamic models, tailored to the unique geometry of a drag-maneuvering body, are seamlessly incorporated into a guidance, navigation, and control (GNC) framework. This integration enables closed-loop CFD simulations with real-time …

    embry-riddle Repository record for Optimal Integrated CFD-GNC Model for Drag-Based Reentry Dynamics (opens in a new tab)

  14. Towards on-road aerodynamics: Evaluation and implementation of real-world conditions

    … the Computational Fluid Dynamics (CFD) software StarCCM+. Furthermore, coast-down test data is used to extract the aerodynamic load from the total road load using a proprietary method. This serves as a comparison to find what settings are the most representative of realistic conditions. Based on …

    chalmers Repository record for Towards on-road aerodynamics: Evaluation and implementation of real-world conditions (opens in a new tab)

  15. CFD and Experimental Analysis of Diesel Particulate Filter

    … using a CFD tool. Building up a CFD model using StarCCM+ which is capable to simulate the flow through all channels and porous media of the filter plates and tuning the pressure drop parameters for all steps of filtration from clean filter to dirty one are the main achievements of this project. …

    chalmers Repository record for CFD and Experimental Analysis of Diesel Particulate Filter (opens in a new tab)

  16. Simulation of Gas Dynamic Cold Spray Process

    … density using the k- Omega turbulent model in StarCCM+ solver. To assess the modeling requirements including mesh, numerical algorithm, and turbulence model, it is critical to validate the calculations against the experimental data. Hence, the numerical results were compared with Muhammad …

    sdstate Repository record for Simulation of Gas Dynamic Cold Spray Process (opens in a new tab)

  17. Numerical evaluation of the free surface effect on the hydrodynamics and dynamics of underwater vehicles

    … model implemented in the commercial code STARCCM+. These tests are carried out for various submergence depths and proper ranges of UV velocity components. For the purpose of maneuverability assessment, the forces and moments arising from the velocity components obtained from the …

    brazil-uerj Repository record for Numerical evaluation of the free surface effect on the hydrodynamics and dynamics of underwater vehicles (opens in a new tab)

  18. Construction and Evaluation of a Scale Model of The Chalmers Formula Student Car

    … dynamics (CFD) simulations were conducted using STARCCM+, where aerodynamic forces and properties were evaluated for each configuration. The same configurations were tested experimentally in the Chalmers wind tunnel to enable comparison and validation of the numerical results. The results showed …

    chalmers Repository record for Construction and Evaluation of a Scale Model of The Chalmers Formula Student Car (opens in a new tab)

  19. CFD Simulation of a Semi-Submersible Floating Wind Platform in Waves. Balancing Accuracy and Efficiency in Simulation of Wave-Structure Interaction

    … offshore wind platform using the CFD software StarCCM+, intending to achieve a balance between computational efficiency and solution accuracy. To support model development, initial wave simulations were conducted without the floater to investigate mesh requirements for accurately capturing …

    chalmers Repository record for CFD Simulation of a Semi-Submersible Floating Wind Platform in Waves. Balancing Accuracy and Efficiency in Simulation of Wave-Structure Interaction (opens in a new tab)

  20. Investigation of Heat Transfer Enhancement Within a Concentric Annulus

    … Reynolds number of 25,000. CFD was performed in STARCCM+ using the realizable κ-ε turbulence model. Results show that turbulence and heat transfer increase with a higher blockage ratio and smaller pitch but the pressure drop is subsequently increased as well. The square turbulator promoted higher …

    ucf Repository record for Investigation of Heat Transfer Enhancement Within a Concentric Annulus (opens in a new tab)

Page 1 of 3