Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 110 for “"STATCOM"”.
-
Fault current generation by STATCOM
… affected during the disturbance. In this thesis, STATCOM model has been developed, with different priority control strategy, to increase the fault current as well as to enhance the voltage stability to support the renewable energy resources to meet the grid requirements. Three priority control …
-
Low capacitance cascaded H-bridge StatCom
… of Cascaded H-Bridge (CHB) multilevel converter StatCom is well established in the industry. In a conventional CHB StatCom, low frequency ripple on the dc side is limited to 10% by utilizing large capacitance. Having a smaller capaci-tance is advantageous because the system will be smaller, …
-
Analysis of STATCOM for voltage dip mitigation
Static Synchronous Compensator (STATCOM) is a Custom Power Device based on a Voltage Source Converter (VSC) shunt connected to the grid. By injecting a controllable current, it can improve the quality of the load current, e.g. compensating harmonic currents or fluctuating currents. However, a …
-
Intelligent STATCOM Voltage Regulation using Fuzzy Logic Control
… One shunt connected device in particular, STATCOM, is very powerful and commonly used in voltage regulation at the power transmission level. STATCOM uses voltage sourced converters to inject or absorb reactive power from the power grid as commanded to stabilize the transmission line voltage …
-
StatCom/BESS using a diode-clamped multilevel inverter
… inverter based Static Synchronous Compensator (StatCom). The main contribution of the work with this dissertation is the practical application of multilevel inverter in StatCom/BESS and the development of the battery reduced structure for the StatCom/BESS."--Abstract, page iv.
-
Synchronverter-based STATCOM control with voltage imbalance compensation
… control strategy is proposed to operate the STATCOM as a synchronous compensator. Moreover, to cope with unbalanced conditions that may appear at the grid, a novel voltage imbalance compensation control is developed to work harmoniously with the main synchronverter model. The used base …
-
Development of PSS/E Model for Enhanced STATCOM
… System (FACTS) has been developed, the E-STATCOM, which can provide voltage support in the form of reactive power and frequency support in the form of active power and is a further development of the existing STATCOM. To be able to specify and test that the E-STATCOM is behaving as …
-
EMTP-RV simulation of a chain link STATCOM
… known as a static synchronous compensator (STATCOM), is generally acknowledged as the next-generation reactive power controller in power systems. Its mode of operation is analogous to that of a rotating synchronous condenser and it provides dynamic voltage compensation, increased transient …
-
Effect of STATCOM Location on Distance Protection Relay Operation
… FACTS concepts, and studies shunt-connected STATCOM and its modelling. Based on the dynamic behaviour of STATCOM in a two-machine system, where a distance protection scheme is applied, performance of the two zone distance protection scheme has been evaluated in EMTDC/PSCAD simulation …
-
Damping improvement of power system using shunt static synchronous compensator STATCOM
… by using shunt static synchronous compensators (STATCOM). The study aims to achieve this by implementing a control strategy using STATCOM.
-
The Modeling and Control of a Cascaded-Multilevel Converter-Based STATCOM
… study of static synchronous compensator (STATCOM) systems utilizing cascaded-multilevel converters (CMCs). Among flexible AC transmission system (FACTS) controllers, the STATCOM has shown feasibility in terms of cost-effectiveness in a wide range of problem-solving abilities from …
-
Modular Multilevel Cascaded Flying Capacitor STATCOM for Balanced and Unbalanced Load Compensation
… network using a Static Synchronous Compensator (STATCOM) which normally also regulates the voltage and power factor. The benefits of modularity and scalability offered by Modular Multilevel Cascaded Converters (MMCC) make them suitable for STATCOM application. A number of different types of MMCC …
-
Control of a Modular Multilevel Flying Capacitor Based STATCOM for Distribution Systems
… network using a Static Synchronous Compensator (STATCOM). This can be used both for regulating the voltage and reducing the losses. A STATCOM is critically dependent on a grid synchronisation scheme that can accurately track the changes occurring in the grid phase and frequency. The Modular …
-
Educational Modeling for Fault Analysis of Power Systems with STATCOM Controllers using Simulink
… transmission, transformers, loads and STATCOM device as an example of the general FACTS devices. The thesis includes modeling of the Test System using Simulink and MATLAB program to produce the results for further analysis. The findings and development included in the thesis is intended …
-
Application of a STATCOM with a Novel Topology to the Power Sub Grid
… Multistage Converter (MSC) and applies it as a STATCOM to Power Sub Grid systems. Through discussions about harmonics reduction, voltage regulation, mathematical modeling and system simulation on the MATLAB/SIMULINK plaform, it illustrates how the MSC is applied to the Power Sub Grid. Based on …
-
Voltage Source Converter based Hybrid STATCOM for Reactive Power Compensation in Utility Grid
… power electronic applications such as FACTS. A STATCOM is one such power electronic converter, from the FACTS family, which can be used to improve the power factor of a transmission line, maintain the connected bus at the required voltage level, etc. In distribution power level, D-STATCOMs are …
Page 1 of 6