Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 260 for “"STIFFENERS"”.

  1. Behaviours of steel connections with unfitted stiffeners

    … A critical issue arises when gaps exist between stiffeners and connected elements, referred to as unfitted stiffeners, which introduce uncertainties in the load-bearing capacity and deformation behaviour of these vital connections. This problem potentially compromises structural safety and leads …

    southwales Repository record for Behaviours of steel connections with unfitted stiffeners (opens in a new tab) Download PDF for Behaviours of steel connections with unfitted stiffeners (opens in a new tab)

  2. Design of HVAC duct stiffeners with tie rods

    … They are usually reinforced with transverse stiffeners. These stiffeners are usually made of hot rolled steel sections, such as equal leg angles or channels.</p><p>When the size of an "HVAC" duct exceeds 72 inches, additional stiffeners in the axial direction are used to reinforce the duct …

    njit Repository record for Design of HVAC duct stiffeners with tie rods (opens in a new tab)

  3. Vibro-acoustic optimization of panel with curvilinear stiffeners

    … complex shapes such as panels with curvilinear stiffeners. Designing and optimizing stiffened panels with predefined structural and acoustic response is the focus of this dissertation. Researchers have dealt with sizing optimization of panels with straight/curvilinear stiffeners for many years …

    vt Repository record for Vibro-acoustic optimization of panel with curvilinear stiffeners (opens in a new tab)

  4. Variable complexity modeling of postbuckled stiffeners for delamination initiation

    … components. Analyses are performed for I-section stiffeners and for a dropped-ply laminate, all of which failed due to free edge delamination in earlier experimental studies. These specimens were made of AS4/3502 graphite-epoxy unidirectional tape. The nonlinear response of the specimens is …

    vt Repository record for Variable complexity modeling of postbuckled stiffeners for delamination initiation (opens in a new tab)

  5. Stability Design of a Slender Column with Curved Longitudinal Stiffeners

    … of a slender column with curved longitudinal stiffeners for large space structure applications. The stiffened column concept is attractive because it allows the buckling load of a slender column to be increased at a fairly low cost in increased mass, and at no change in the column packaged …

    odu Repository record for Stability Design of a Slender Column with Curved Longitudinal Stiffeners (opens in a new tab)

  6. Failure and crippling of graphite-epoxy stiffeners loaded in compression

    Results of an experimental study of the failure and crippling of thin-walled open section prismatic compression members are presented. Twenty-four specimens were tested, 13 of which were channel sections and the other 11 were zee sections. Three specimens were made of 2024-T3 aluminum. The …

    vt Repository record for Failure and crippling of graphite-epoxy stiffeners loaded in compression (opens in a new tab)

  7. Warpage Evaluation of Double-Side Cooled Power Modules with Ceramic Stiffeners

    … encapsulants, rigid encapsulants, and ceramic stiffeners. Warpage evolution throughout fabrication was characterized using 3D optical profilometry, while transient thermal measurements were used to evaluate thermal resistance and inter face performance. Results showed that increasing module …

    vt Repository record for Warpage Evaluation of Double-Side Cooled Power Modules with Ceramic Stiffeners (opens in a new tab)

  8. Pi-bracket sensor for crack detection monitoring near stiffeners in bridge girders

    … (FOSs), with a focus on detecting cracks near stiffeners, areas traditionally not monitored due to bending limitations of FOSs. Combining experimental testing, Finite Element Analysis, and theoretical validation, the research demonstrates that the pi-bracket configuration overcomes the …

    manitoba Repository record for Pi-bracket sensor for crack detection monitoring near stiffeners in bridge girders (opens in a new tab)

  9. Scale effects in buckling, postbuckling and crippling of graphite-epoxy Z-section stiffeners

    … of graphite-epoxy laminated composite Z-section stiffeners subjected to uniaxial, compressive loading has been evaluated. The response regimes investigated are prebuckling, initial local buckling, postbuckling and crippling. A mechanistic approach to scaling has been used, in which the …

    vt Repository record for Scale effects in buckling, postbuckling and crippling of graphite-epoxy Z-section stiffeners (opens in a new tab)

  10. Transfer of stress from main beams to intermediate stiffeners in metal sheet covered box beams

    The authors have obtained by experimental methods an effective shear modulus for the sheet in a stiffened plane sheet beam combination under bending loads. For the combinations tested it was found that the modulus decreases rapidly under light loadings from the elastic value of some asymptotic …

    nps Repository record for Transfer of stress from main beams to intermediate stiffeners in metal sheet covered box beams (opens in a new tab)

  11. Improvement of the structural response of steel tubular wind turbine towers by means of stiffeners

    … the wall thickness and adopting internal stiffeners. All studied design solutions satisfy the strength and serviceability requirements as specified by the design codes of practice.

    birmingham Download PDF for Improvement of the structural response of steel tubular wind turbine towers by means of stiffeners (opens in a new tab)

  12. Improvement Of Rotation Capacity Of Composite Beam-To-HSS Column Connections Using External Horizontal Stiffeners

    … Column Connections Using External Horizontal Stiffeners Mahdi Afshar Arjmand This thesis focuses on the analysis of out-of-plane deformation (OOP) in column flange located in the panel zone of composite beam-to-column steel connection, as a critical aspect of steel structural engineering. This …

    calpoly Repository record for Improvement Of Rotation Capacity Of Composite Beam-To-HSS Column Connections Using External Horizontal Stiffeners (opens in a new tab)

  13. Failure analysis of composite top-hat-stiffeners using acoustic emission and embedded fibre bragg gratings

    … the out-of-plane load transfer in Top-hat-stiffeners (THS). This research investigates the damage mechanisms of curved composite structures (L-bends and THSs) and estimates the residual strength after the initial failure. This is vital in estimating the time required to obtain assistance …

    unsw Repository record for Failure analysis of composite top-hat-stiffeners using acoustic emission and embedded fibre bragg gratings (opens in a new tab)

Page 1 of 13