Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 30 for “"Safe operating area"”.
-
Transient Safe Operating Area (tsoa) For Esd Applications
… measurements are used to define Transient Safe Operating Area (TSOA). The parameters are then used to assess effectiveness of protection devices for output and input pins. The methodology for input pins includes establishing ESD design targets under Charged Device Model (CDM) type stress in …
-
A Comprehensive Study of Safe-Operating-Area, Biasing Constraints, and Breakdown in Advanced SiGe HBTs
… results on lower breakdown voltages, making operating voltage constraints an increasingly vital reliability consideration in SiGe HBTs from both a device and circuits perspective.
-
Safe operating area and failure modes of SiC gate turn-off thyristors for high energy applications
In order to determine the safe operating limits of SiC 9 kV SGTOs a test system was designed and built to stress the devices with high current density pulses (over 10X the rated densities) for greater than 10,000 high current discharges. A total of 7 SiC SGTOs were pulsed on the test system for …
-
Fault Diagnosis and Condition Monitoring of Power Electronic Components Using Spread Spectrum Time Domain Reflectometry (SSTDR) and the Concept of Dynamic Safe Operating Area (SOA)
… availability have been one of the major focus areas in the power electronics field in the last decades. Power semiconductor devices such as metal oxide semiconductor field-effect transistor (MOSFET) and insulated-gate bipolar transistor (IGBT) are considered to be the most fragile element of …
-
Reliability of SiGe HBTs for extreme environment and RF applications
… of the proposed research is to characterize the safe-operating-area of silicon-germanium (SiGe) heterojunction bipolar transistors (HBTs) under radiofrequency (RF) operation and extreme environments. The degradation of SiGe HBTs due to mixed-mode DC and RF stress has been modeled for the first …
-
Design and Reliability of mm-Wave Circuits In Silicon-Germanium
… The aim is to extend the concept of Safe Operating Area (SOA), which is the region of the DC I-V plane that does not damage a device over time, to the circuit level. This is done with the introduction of a performance-informed Circuit Safe Operating Area (C-SOA), which is defined as …
-
The Design of an Asic Control Chip for a Forward Active Clamp Converter and the Investigation of Integratable Lateral Power Devices
… obtain devices with high current density, large safe operating area, fast response and low cost is highly desirable for power ICs. In Part II of this thesis, several lateral power devices are discussed and simulated, including lateral IGBT, lateral MCT and double gate lateral MCTs. It is shown …
-
Pulsed evaluation of silicon carbide majority carrier devices
… tests are proposed to further investigate the safe operating area boundaries.
-
Arcing Failure of ROHS Compliant Electromagnetic Relays
… mechanisms. In addition, it aims to predict a safe operating area of power and energy over which specific relay contacts will not weld under high power DC conditions. Relays from various manufacturers were subjected to capacitor discharge pulses of 250 V at 10-80 uF to characterize relay …
-
Silicon-Germanium Heterojunction Bipolar Transistors for High-Temperature and Radiation-Rich Environments
… SiGe HBTs at high temperatures are explored. A safe-operating-area (SOA) map across temperature is generated using a mixed-mode stress methodology to illustrate the reliability concerns. Using this SOA framework, reliable, high-temperature circuits are designed with a calibrated, …
-
A Single-Frequency Impedance Diagnostic for State of Health Determination in Li-ion 4P1S Battery Packs
… is a critical parameter for determining the safe operating area of a battery cell and battery packs to avoid abuse and prevent failure and accidents. A series of experiments were performed to evaluate the performance of a 4P1S battery array using electrochemical impedance spectroscopy to …
-
Semiconductor Device Modeling, Simulation, and Failure Prediction for Electrostatic Discharge Conditions
… status. SPICE model cannot cover the device operating region beyond normal operation. Thermal failure is one of the main reasons to cause device failure under ESD conditions. A compact model is developed to predict thermal failure with circuit simulators. Instead of considering the detailed …
-
Power MOSFETs with Enhanced Electrical Characteristics
… Circuits (PIC) has numerous applications in the areas of industrial and consumer electronics. These smart PICs must rely on the availability of high performance power transistors. In this thesis, a vertical U-shaped gate MOSFET (UMOS) and a lateral Extended Drain MOSFET (EDMOS) with enhanced …
-
Design, scaling and reliability of devices for high-performance mixed-signal applications
… To support this objective, several specific areas were targeted to fill the existing gaps in knowledge. This includes developing a technology computer-aided-design (TCAD) based integrated simulation framework and methodology to study performance scaling and reliability in complementary SiGe …
-
Probabilistic Approaches to Enhance Safety and Energy Management of Energy Transition Components and Systems
… intermittency, complex degradation behavior, safety concerns, and lack of historical monitoring data. The goal of this research is to enhance probabilistic approaches for health and energy management of energy transition components and systems under uncertainty and limited data conditions, …
-
Συμβολή στην ανάπτυξη μετατροπέων ισχύος με ημιαγωγούς καρβιδίου του πυριτίου και συμβατότητα με τους κώδικες δικτύου
… that SiC devices exhibit outside their safe operating area. A universal, ac–coupled driving circuit applicable to both normally-on and normally-off SiC semiconductors is proposed, utilizing forward bias during conduction state. The prototype is investigated in terms of efficiency, …
-
An Accurate and Efficient Electro-thermal Compact Model of SiC Power MOSFET including Third Quadrant Behavior
… included to make the model capable of predicting Safe Operating Area (SOA). Double pulse tests (DPT) at various temperatures were performed to validate the model's switching characteristics accuracy. A buck converter was implemented with the same half-bridge configuration as the DPTs to validate …
-
Neutron- and Photon-Induced Charge Dynamics in Group III-Nitride Semiconductor Devices
… and performance of electrical systems for safety-critical applications and harsh radiation environments. In this thesis, the electrical characteristics and irradiation response of AlGaN and GaN heterostructures, and High Electron Mobility Transistors (HEMTs), were studied using electron …
-
Investigation of MOS-Gated Thyristors and Power Diodes
… investigation of the reverse-biased safe operating area (RBSOA) characteristics of the MCT has been undertaken. The electrical failure mechanisms of the MCT are discussed, and the relationship between the dynamic avalanche limited RBSOA boundary of the MCT and the lower open-base …
Page 1 of 2