Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 25 for “"Salt Bath"”.
-
A COMPARISON OF SMALL SCALE LABORATORY EXPERIMENTS WITH THE ENVIRONMETNAL PROTECTION AGENCY RECCOMENDED DENSE GAS DISPERSION MODELS: AN ASSESSMENT OF THE VALIDITY OF SALT BATH MODELING OF ATMOSPHERIC FLOWS
… of a cylindrical, finite volume of dense salt water were performed. In the experiments, the horizontal spread of the dense liquid over a flat surface(i.e. gravity current front position over time) was measured. The results of these small scale experiments were compared to two dense gas …
-
Effect of Different Heat Treatment Equipment on the Mechanical Properties of Nitinol Wire
… between Nitinol wire heat treated in a salt bath and Nitinol wire heat treated in a sand bath. The goal was to determine if one heat treatment method is superior to the other when considering the mechanical properties for the design of a transcatheter aortic valve. Eighteen test groups …
-
The influence of visco-elastic processes on the generation of thermal stresses in quenched low alloy steel plates.
… although an air cool following an intermediate salt bath treatment above the Ms temperature prevented the generation of thermal stresses during the formation of martensite. The use of an oil quench following the salt bath treatment was of no value, and none of the combinations of heat treatment …
-
Effect of stress on recrystallization of low carbon steel.
… tapered tensile specimens which were heated in a salt bath. Rockwell B hardness measurements were used to follow the course of recrystallization. No evidence was found that stress influenced the recrystallization rate. There was evidence that plastic strain had an accelerating effect on the …
-
The generation of thermal stress and strain during quenching.
… the generation of thermal stress and strain. A salt bath treatment above the Ms temperature followed by air cooling prevented residual stress development, but an oil quench after the salt bath treatment generated a level of residual stress at the end of cooling that was similar to that obtained …
-
Temper brittleness related to faulting
… by means of an isothermal heat treatment in a salt bath, Changes in internal structure of ductile and embrittled specimens were studied using a highprecision X-ray dif fractometer. The resulting peak shapes showed (1) a slightly better resolution of the alpha doublet by the brittle specimen, …
-
PRESSURE MEASUREMENT INSTRUMENTATION IN A HIGH TEMPERATURE MOLTEN SALT TEST LOOP
<p>A high temperature molten salt test loop that utilizes FLiNaK (LiF-NaF-KF) at 700ºC has been proposed by Oak Ridge National Laboratory (ORNL) to study molten salt flow characteristics through a pebble bed for applications in high temperature thermal systems, in particular the Pebble Bed – …
-
A study of the effect of the ion exchange method of chemical tempering on a macroflaw in soda-lime glass.
… various lengths of time in a potassium nitrate salt bath held at 365°C. The behavior of the macroflaw while being treated and at fracture was closely observed. The strain energy release rale, G(c) , and the fracture toughness, K(c), were found by using the double cantilever cleavage technique of …
-
An investigation of some aspects of cerium electrowinning
… solubility of cerium oxide in a molten fluoride salt bath(CeF₃, BaF₂, LiF) was determined by measuring the change in electrical conductivity of the bath as a function of added cerium oxide. The saturation solubility was found to be 2.9 wt% at 900 °C. The solubility was found to increase with …
-
Nitriding of Austenitic Stainless Steel
… of stainless steel have been gas nitriding, salt bath nitrocarburising and lately plasma nitriding. Plasma nitriding due to its operating conditions, does not require any prior treatments for removal of the passive oxide film. Plasma nitriding also provides the possibility of treatment at low …
-
Analysis of Strength Variation in Glass Due to Ion Exchange
… heat treatment with and without an ion exchange bath. Several sample groups of 30 sodium borosilicate glass rod specimens were heat treated at various temperatures in air and in a potassium nitrate salt bath to induce an ion exchange process. All samples were then tested to failure in 4-point …
-
Recovery and recrystallization kinetics of continuous and ingot cast AA5754
… a series of annealing tests were conducted in a salt bath at temperatures ranging from 200°C to 375°C for various lengths of times. Recovery and recrystallization kinetics were examined by analyzing the change in the mechanical properties of the material as a function of time and temperature. …
-
The Effects of Applied Strain and Heat Treatment on the Properties of NiTi Wire During Shape Setting
… wire under applied strain were heat treated in a salt bath, followed by a rapid quench. Transformation temperatures and mechanical properties were characterized using the differential scanning calorimeter and tensile tests. Changes in the Af, UTS, and elastic modulus due to ageing processes and …
-
The processing and characterisation of recycled NdFeB based magnets
… A study of how reactive recycled magnets in 3% salt-bath (Sodium Chloride NaCI) compared with starting magnets. The corrosion study was conducted over 30 weeks where results had indicated that recycled magnets have better corrosion resistance than the original material. This was due mainly to …
-
Development Of High Strength High Toughness Third Generation Advanced High Strength Steels.
… was carried out for 2 hours in a molten salt bath. The microstructures were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and optical metallography. Quantitative analysis was carried out by image analysis technique. The effect of …
-
Cd Transport in Eutectic LiCl-KCl and Contamination of Zr Metal And Thermal Dehydration of Bulk LiCl-KCl
… from the LCC pool through the eutectic LiCl-KCl salt bath to the anode baskets containing the empty hull where it is retained as a Zr-Cd intermetallic. This study sought to replicate the Cd contamination in a dry Ar glovebox using small-scale analogue of the Mark-IV ER salt-Cd metal system.</p> …
-
Retrogression-reaging and hot forming of AA7075
… 30 minutes. RRA behavior was studied with molten salt bath treatments between 200 and 350 °C. The PBC was used in lieu of the standard 24 hour reaging treatment conducted at 121 °C. It was determined that retrogression treating below 250 °C was acceptable for RRA forming, with retrogressing at 200 …
-
An Electrolytic Method to Form Zirconium Hydride Phases in Zirconium Alloys with Morphologies Similar to Hydrides Formed in Used Nuclear Fuel
… 20°C to 120°C temperatures for a H2SO4 and H2O bath for isothermal experiment conditions. This system was designed to accommodate a molten salt bath in future experiments to achieve higher isothermal temperatures. Additionally, the design accommodates a cartridge heater, which when placed on the …
-
Alternative Anodes for the Electrolytic Reduction of Uranium Dioxide
… a stainless steel alloy 316 cathode in a molten salt bath consisting of LiCl-2wt% Li2O and occurs at 700⁰C. A major shortcoming of the existing process is the degradation of the platinum anode under the severely oxidizing conditions encountered during electrolytic reduction. This work …
-
Mathematical modelling of the microstructure and texture changes during hot tandem rolling of AA5182 and AA5052 aluminum alloys
… The samples were then heat-treated in a salt bath for various lengths of time and the percent recrystallization, recrystallized grain size and texture changes during recrystallization were measured. A temperature compensated time parameter was used to convert the isothermal …
Page 1 of 2