Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 19 of 19 for “"Salt Spray Test"”.
-
Heavyweight Phosphating of Rubber-to-Metal Bonded Products
… would withstand the periods of exposure to the salt spray test required by the sponsoring manufacturer's customers. Preliminary research showed that the range of finishes used were capable of meeting the customers requirements but the phosphate and sealant finishes used for over 45% (volume) of …
-
The effect of external corrosion on the performance of multichannel multilouvered fin aluminum heat exchangers
… are evaluated periodically during ten days of salt spray test refers to ASTM G85 Annex 3 the acidified synthetic seawater testing (SWAAT). To explore the effect of deposit formed during the salt spray tests on the heat exchanger performance, one of these two heat exchangers is left with the …
-
Design and Development of Rapid Battery Exchange Systems for Electric Vehicles to Be Used As Efficient Student Transportation
… coating were subjected to environmental wear tests in order to determine if the type and thickness of common protective coatings has an effect on the durability of the system over its lifetime. The tests consisted of a 2400 hour extended salt spray test, coating delamination testing, and …
-
Evaluation of tests for porosity and defects in PVD and electroless coatings.
… was investigated using porosity/corrosion tests. The tests used were the neutral salt spray test, ferroxyl test, sulphur dioxide test and the copper cementation test. Additionally the effect of radii on the corrosion resistance and porosity of electroless nickel coatings was examined. …
-
Improved testing methodologies for evaluating the corrosion resistance of paint systems and materials for aging military aircraft
… has long relied on atmospheric exposure test sites. There are established accelerated test methods for assessing the performance of aerospace coatings however, these are often far removed from the environments experienced by aircraft during typical operations and do not provide predictive …
-
The Moisture Transport Properties of Cement Mortar under Salt Spray Deposition
… and indoor thermal comfort. Due to the salt spray climate, the external boundary conditions of buildings in coastal areas differ significantly from those in inland regions. Under salt spray deposition, salt crystals accumulate and expand within the pores of building materials, which not …
-
Influence of pretreatment on corrosion behaviour of duplex zinc/polymer coatings on steel substrates
… hot-dip continuous and batch galvanized and zinc sprayed samples were investigated using hot-stage microscopy. The effects of different pretreatments and degassing after conversion coating formation on flow characteristics were determined.Duplex coatings were subjected to the acetic acid salt …
-
Use of cerium-based inhibitors in electrochemically deposited coatings for the corrosion protection of aluminum alloys
… is clear that the development of an accelerated test method for the evaluation of new corrosion inhibitive systems which successfully correlates with the ASTM B-l 17 Salt Spray test is necessary. The purpose of this study was the incorporation and evaluation of promising cerium- based corrosion …
-
Development of accelerated corrosion tests involving alternative exposure to hostile gases, neutral salt spray and drying
In this thesis, a well proven corrosion testing method developed by SP Technical Research Institute of Sweden (SP) ISO 21207 method B is modified in order to increase even further the acceleration factor of corrosion attacks by 40%. The method combines humidity cycling with conditioning, drying as …
-
Development of Environmentally Friendly Non-Chrome Conversion Coatings for Cold-Rolled Steel
… steel sheets. Various carboxylic acids and their salts have been studied for coating phosphated electrogalvanized (EG) steel sheets, including 10-undecenoic acid (UA), oleic acid (OA), and other fatty acids such as stearic acid (SA) and palmitic acid (PA). When they were used alone, or …
-
Investigation of plasmaion vapor deposition (IVD) hybrid coatings for corrosion protection and plasma destruction of oral bacteria
… and thus better corrosion resistance. Corrosion test results from SO2 salt spray test showed that a similar amount of corrosion products were found with the plasma coated IVD specimens as their controls, i.e., chromate conversion coated IVD samples, and did not form visible amounts of red rust …
-
Development of an advanced DC-polarisation/AC-impedance cyclic test to evaluate the corrosion of electrically-conductive coating/substrate systems
In this work, an advanced (AC)DC/OCP/AC cyclic test regime has been developed (and validated experimentally) as a new tool for the evaluation of the corrosion behaviour of metallic substrates and/or electrically-conductive coatings. Incorporation of concurrent solution pH measurement with the …
-
Study of the deposition, properties and applications of electroless deposits containing particles
… was also determined using a simulated forging test. Dies made of standard die steel were coated and the wear rates of the layers as deposited and after heat treatment were compared with those of uncoated tools. The wear resistance generally increased with hardness, it was 50-75% more than the …
-
Hybrid sol-gel/polyaniline coating for the corrosion protection of AA2024.
… coating techniques such as dip-, spin- or spraying. In this study a novel anti-corrosion coating based upon the combination of a silica hybrid sol-gel system and polyaniline is presented. Chemically prepared PANI and a silica based sol were combined and applied to an Al alloy, AA2024-T3 …
-
Zinc-Magnesium and Zinc-Aluminium- Magnesium Coatings Produced by Magnetron Sputtering and Melt Dipping
… coating. The performance of Zn-Al-Mg coating in salt spray test is better than that of Zn coating by 10-20 times and Zn- Al coating by 2-5 times. Furthermore, Zn-Al-Mg coating is found to have self-healing capability. Various coating methods, including hot dipping and physical vapour deposition …
-
Ανάπτυξη και εφαρμογή μεθόδων αντιδιαβρωτικής προστασίας κραμάτων αλουμινίου φιλικών προς το περιβάλλον
… silanes, Ti and Zr oxides. Corrosion performance testing of Al surfaces prepared by these coatings confirm the compatibility with the paint /finish PPY-based coatings were deposited onto the Al surface by means of in-situ polymerization methodology. At the optimized process conditions dense and …
-
Korozní odolnost vybraných povrchových úprav ve vodném prostředí s obsahem chloridů
Bakalářská práce se zabývá hodnocením parametrů kvality vybraných povrchových úprav ocelového povrchu z hlediska ochrany proti korozi. K nejvýznamnějším parametrům patří tloušťka povlaku, přilnavost k podkladovému materiálu, tvrdost povlaku, výskyt defektů v povlaku a korozní odolnost v neutrálním …
-
Ανάπτυξη πολυμερικών συστημάτων μορφολογίας καψουλών μέσω διεργασιών πολυμερισμού
… operating in the paint industry, additional tests were conducted on self-healing coating systems based on microcapsules. Both alkyd-based and epoxy-based protective coating systems for metal surfaces were tested. Furthermore, the incorporation of microcapsules into the topcoat layer, the …
-
Korozní odolnost povrchových úprav polysiloxanovými nátěrovými systémy
… odolnost vytvořených povlakových systémů je testována laboratorní urychlenou zkouškou v korozní komoře, kde jsou simulovány přírodní atmosférické podmínky. Chemická odolnost ve vybraných chemických prostředích je ověřována kapkovou metodou. Jsou hodnoceny také znaky jakosti povlaků - …