Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 38 for “"Salt leaching"”.
-
Technology and theory of producing APT from tungsten concentrates by sulfuric acid conversion-ammonium salt leaching
… acid conversion-ammoniacal ammonium carbonate leaching route. The complete conversion of tungsten concentrates in H2SO4 solutions can be achieved by controlling the sulfuric acid concentration and adding an oxidizing agent. The formation mechanism of the H2WO4 layer on unreacted tungsten …
-
EVALUATION OF BASE LINERS TO REDUCE NITROGEN AND SALT LEACHING FROM POULTRY LITTER STORAGE STOCKPILES TO THE UNDERLYING SOIL - A FIELD COLUMN STUDY
… the surface 10 cm of the soil was severely salt affected: under alum, gypsum, lime and control the conditions became moderately to strongly saline. Plastic was most effective in preventing N, K and Na leaching to the soil.
-
Coupled effects of irrigation management and water salinity on date palm cultivars in the hyper-arid environment of the United Arab Emirates : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy (PhD) in Soil and Environment Sciences, School of Agriculture and Environment, Massey University, Palmerston North, New Zealand
… of date palms, and to limit the amount of salt leaching from the rootzone of the date palms. These critical issues provide the underpinning reasons for the research described in this thesis. Environment Agency – Abu Dhabi (EAD) has invested in two research projects to determine the minimum …
-
Maintaining the hyper-arid forests of Abu Dhabi by sustainable irrigation using treated sewage effluent in conjunction with groundwater : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy (PhD) in Soil and Environmental Sciences, School of Agriculture and Environment, Massey University, Palmerston North, New Zealand
… to account for a 25% factor-of-safety, and a 25% salt-leaching fraction. For TSE, there is no need for salt leaching. These recommendations will lead to GW savings of 35-70% compared to current practice. Eventually TSE should replace GW to sustain the forests.
-
Development of Multifunctional Nanofibrous Membrane Material for Biological Wastewater Treatment
… was fabricated by compression molding and salt leaching using PVDF. Then, the adhesion of the nanofibrous membrane to the open-cell foam was achieved at elevated temperature with the assistance by supercritical carbon dioxide (ScCO2). The effects of processing parameters of the …
-
Microbial Bioassay Techniques for Assessing Acid Mine Spoil Amendments for Revegetation
… chelators, trace elements, potassium, manure and salt leaching were studied with the bioassay by observing microscopically and by measuring nitrogen fixation and accumulation, dehydrogenase activity, chlorophyll a accumulation, and other chemical parameters. It was concluded that the limiting …
-
Bioactive and Elastomeric Scaffolds: A Growth-Factor-Free Approach for Bone Tissue Engineering
… and osteoindictive nanosilicates, fabricated via salt-leaching method. Nanosilicates are ultrathin nanomaterials reported to induce osteogenic differentiation of human stem cells in the absence of any osteogenic factors such as dexamethasone or bone morphogenetic proteins-2 (BMP2). The addition of …
-
Development of insulating materials with thermal energy storage/release capability
… as thermoplastic matrix and the technology of salt leaching was used to obtain foams without the use of chemical foaming agents. Foams containing different amounts (up to 56 wt%) of a microencapsulated PCM with a melting point of 24 °C were prepared. The addition of the PCM led to a decrease of …
-
Photo-Thermal Application of a Polydimethylsiloxane Foam Embedded with Carbon Nanoparticles for Interfacial Solar Water Evaporation
… structure were fabricated via a facile salt-leaching technique to achieve excellent photo-thermal properties for solar desalination applications. The effect of different foam parameters on the photo-thermal performance of the CNP/PDMS foams was investigated and demonstrated in this …
-
Metal Oxide Substituted Polyurethane foams for enhanced craniofacial bone repair: Exploring the properties of Cerium, Zirconium and Copper doped Zinc oxide nanoparticles as potential additive for bone regeneration and angiogenesis.
… oxides were fabricated using freeze extraction salt leaching process. The 1% CeZnO5, ZrZnO5 and CuZnO5 was added to polyurethane-hydroxyapatite scaffold. The cell seeding efficiency data revealed 60% cell adhesion for PU-HA-CeZnO5 scaffold, 45% cell adhesion for PU-HA-ZrZnO5 and 80% for …
-
Effects of Therapeutic Radiation on Polymeric Scaffolds
… were fabricated using solvent casting and/or salt leaching techniques. Scaffolds were placed in phosphate buffered saline (PBS) and exposed to a typical cancer radiotherapy schedule. A total dose of 50 Gy was broken into 25 dosages over a three-month period. PBS was collected over time and …
-
Remediation of a Salt-Affected, Macroporous Soil in Central Alberta, Canada
Salt-affected soil may be characterized by both elevated salinity and sodicity. High salinity levels impair plant growth and result in reduced plant yield. Leaching of salt from affected soil may be utilized to improve plant growth or to meet regulatory soil quality guidelines. As salinity levels …
-
Phosphorus adsorption by selected clay minerals
… with Li⁺, Na⁺, K⁺, Mg⁺⁺, Ca⁺⁺, Sr⁺⁺, Ba⁺⁺ by salt leaching techniques. The clays were then equilibrated with very dilute phosphorus solutions. Preliminary experiments with representative clay samples showed that equilibrium between adsorbed phosphorus and the phosphorus in solution was reached …
-
Design and Evaluation of a Tunable-Stiffness Phantom
… porous silicone sponges were fabricated via salt-leaching to establish a controllable reference material for comparison of mechanical stiffness. In a 30 mm outer layer, the material accommodated repeatable indentations of 5–15 mm (≈17–50% through-thickness strain), spanning the typical range …
-
Impacts of Soil Amendments and Fertilization Strategies on the Functions of Agroecosystems
… crop yield. Soil amendments facilitate soil salt leaching by improving soil structure; however, they may introduce certain amounts of salts and contaminants depending on the source of the raw materials. The combined application of inorganic and organic amendments may be more beneficial than …
-
New materials and scaffold fabrication method for nerve tissue engineering
… were fabricated using fiber templating and salt leaching. Micro computed tomography, scanning electron microscopy, and cryo-sectioning revealed the presence of longitudinally oriented channels. Channel volume and average pore size of the scaffolds were controlled by the number of fibers and …
-
Growth Plate Regeneration Using Polymer-Based Scaffolds Releasing Growth Factor
… were fabricated from PLGA microspheres using the salt leaching method. The first part of this work investigated the effect of sintering the microspheres by studying the mechanical properties, degradation and morphology and their potential applications for hard and soft tissue implants. Growth …
-
Evaluation of Preferential Flow Processes in Reclamation Soil Covers
… to examine the influence of preferential flow on salt leaching in reclamation soil covers. The study site was a reconstructed landscape where saline-sodic minespoil from oil sands mining was capped with layers of glacial and peat mix soil. Preferential flow was investigated using laboratory column …
-
Biodegradable Silicon-Containing Elastomers for Tissue Engineering Scaffolds and Shape Memory Polymers
… elastomers were created using a novel porogen - salt leaching technique. Resulting porous elastomers were designed for tissue engineering scaffolds or shape memory foams.
-
Matrices and strategies for complex tissue regeneration
… First, pure silk fibroin sponges produced by salt leaching were combined to static or dynamic culture conditions to evaluate the chondrogenic potential of adipose- derived stem cells (ASCs). These cells have indeed many advantages for cartilage Tissue Engineering applications, such as …
Page 1 of 2