Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 37 for “"Salt-Cooled"”.

  1. Fluoride-salt-cooled high-temperature reactor generative design optimization with evolutionary algorithms

    Submission original under an indefinite embargo labeled 'Open Access'. The submission was exported from vireo on 2023-04-12 without embargo terms

    uiuc Repository record for Fluoride-salt-cooled high-temperature reactor generative design optimization with evolutionary algorithms (opens in a new tab)

  2. A Whole-Core Thermal Hydraulic Model for Pin-Fueled Fluoride-Salt-Cooled Reactors

    Fluoride-salt-cooled high-temperature reactors (FHRs) are an emerging category of reactors that combine the graphite-matrix coated-particle fuel developed for high temperature gas reactors (HTGRs) with a high heat capacity, single-phase molten salt coolant. One of the potential configurations for …

    gatech Repository record for A Whole-Core Thermal Hydraulic Model for Pin-Fueled Fluoride-Salt-Cooled Reactors (opens in a new tab)

  3. Experimental and Computational Investigations of Heat Transfer Systems in Fluoride Salt-cooled High-temperature Reactors

    Fluoride salt-cooled high-temperature reactors (FHRs) face a number of challenges similar to those faced by other Generation IV advanced reactor concepts. Predicting heat transfer in these systems accurately and reliably is one major challenge. Another is ensuring the safety of these systems during …

    unm Repository record for Experimental and Computational Investigations of Heat Transfer Systems in Fluoride Salt-cooled High-temperature Reactors (opens in a new tab)

  4. Liquid-Salt-Cooled Reactor start-up with natural circulation under Loss-of-Offsite-Power (LOOP) conditions

    The Liquid-Salt-Cooled Very High-Temperature Reactor (LS-VHTR) was modeled using the neutronics analysis code SCALE6.0 and the thermal-hydraulics and kinetics modeling code RELAP5-3D with objective to devise, analyze, and evaluate the feasibility and stability of a start-up procedure for this …

    gatech Repository record for Liquid-Salt-Cooled Reactor start-up with natural circulation under Loss-of-Offsite-Power (LOOP) conditions (opens in a new tab)

  5. Validation Studies of Single-Phase Natural Circulation Response of the Fluoride salt-cooled High-temperature Reactor (FHR)

    … the decay heat removal system for a Fluoride salt-cooled High-temperature Reactor (FHR). The loop of interest operates with a single phase, near ambient pressure molten salt coolant. Most of the codes used for LWR safety and licensing were designed to model more complex heat transfer problems. …

    unm Repository record for Validation Studies of Single-Phase Natural Circulation Response of the Fluoride salt-cooled High-temperature Reactor (FHR) (opens in a new tab)

  6. Fluid Flow and Heat Transfer Characteristics of High Prandtl Number Fluids for Fluoride-Salt-Cooled Reactor Applications

    Fluoride-salt-cooled high-temperature reactors (FHRs) are a new and developing class of reactors that features low-pressure liquid fluoride salt cooling and the graphite-matrix coated-particle fuel developed for high temperature gas reactors (HTGRs) and are designed for a high-temperature power …

    gatech Repository record for Fluid Flow and Heat Transfer Characteristics of High Prandtl Number Fluids for Fluoride-Salt-Cooled Reactor Applications (opens in a new tab)

  7. Methodology for Coupled Reactor Physics, Thermal Hydraulics, and Depletion of a Fluoride Salt-Cooled High-Temperature Reactor (FHR)

    … on Generation IV designs, which includes molten salt technologies. One type of molten salt reactor with a solid fuel form is a fluoride salt-cooled high-temperature reactor. A prismatic fuel design of this type is the Advanced High Temperature Reactor (AHTR). AHTR uses hexagonal fuel assemblies …

    gatech Repository record for Methodology for Coupled Reactor Physics, Thermal Hydraulics, and Depletion of a Fluoride Salt-Cooled High-Temperature Reactor (FHR) (opens in a new tab)

  8. Design and Feasibility Study of an Air-Cooled Reactor Cavity Cooling System for Fluoride-Salt-Cooled High-Temperature Reactors

    Licensing efforts for Fluoride-Salt-Cooled High-Temperature Reactors (FHRs) are dependent on passive safety systems designed for decay heat removal, yet no prior study has evaluated an air-based Reactor Cavity Cooling System (RCCS) for this role. This thesis addresses that gap by determining …

    unm Repository record for Design and Feasibility Study of an Air-Cooled Reactor Cavity Cooling System for Fluoride-Salt-Cooled High-Temperature Reactors (opens in a new tab)

  9. Analysis of Double-Wall and Twisted-Tube Heat Exchanger Concepts for use in Fluoride Salt-Cooled High-Temperature Reactors

    Fluoride Salt-cooled High-temperature Reactors (FHRs) are an attractive fourth generation reactor concept. Like other fourth generation concept designs, FHRs offer characteristics such as a high-temperature low-pressure molten salt coolant allowing the reactor to be combined with a high-temperature …

    unm Repository record for Analysis of Double-Wall and Twisted-Tube Heat Exchanger Concepts for use in Fluoride Salt-Cooled High-Temperature Reactors (opens in a new tab)

  10. Development of a Reactor Physics Analysis Procedure for the Plank-Based and Liquid Salt-Cooled Advanced High Temperature Reactor

    <p>Presented in this dissertation is the investigation and development of an adapted lattice physics-to-core simulator two-step procedure based on the SERPENT 2 and NESTLE neutronics codes for the rapid analysis of the Advanced High Temperature Reactor (AHTR). AHTR specific characteristics, such as …

    utk-theses Repository record for Development of a Reactor Physics Analysis Procedure for the Plank-Based and Liquid Salt-Cooled Advanced High Temperature Reactor (opens in a new tab)

  11. Dynamic Modeling and Simulation of a Power Generation Steam Rankine Cycle for a Fluoride Salt-Cooled High-Temperature Reactor Nuclear Power Plant

    Nuclear Fluoride Salt-Cooled High-Temperature Reactors (FHRs) have the potential to greatly improve nuclear technology in terms of safety and cost. By combining molten salt coolant technology from the Molten Salt Reactor (MSR) and TRISO fuel technology from the Very High Temperature Gas Reactor …

    calpoly Repository record for Dynamic Modeling and Simulation of a Power Generation Steam Rankine Cycle for a Fluoride Salt-Cooled High-Temperature Reactor Nuclear Power Plant (opens in a new tab)

  12. DESIGN AND ANALYSIS OF AN INTERMEDIATE HEAT EXCHANGER AND PASSIVE DECAY HEAT REMOVAL SYSTEM FOR A GENERIC FLUORIDE SALT-COOLED HIGH-TEMPERATURE REACTOR APPLICATION

    Generation IV reactors, such as the Fluoride salt-cooled High-temperature Reactor (FHR), feature efficient heat transfer and passive heat removal systems. However, accurately predicting thermal behavior under steady-state and transient conditions remains challenging. This work designs and evaluates …

    unm Repository record for DESIGN AND ANALYSIS OF AN INTERMEDIATE HEAT EXCHANGER AND PASSIVE DECAY HEAT REMOVAL SYSTEM FOR A GENERIC FLUORIDE SALT-COOLED HIGH-TEMPERATURE REACTOR APPLICATION (opens in a new tab)

  13. Stylized Benchmark Description and Reference Solutions for the Pin-Fueled Small Modular Advanced High Temperature Reactor

    … (ORNL) preconceptual design of a fluoride-salt cooled Small modular Advanced High Temperature Reactor (SmAHTR). The SmAHTR preconceptual design details a small scale, transportable reactor of 19 prismatic assemblies which utilize tri-isotropic (TRISO) particles of Uranium Oxicarbide (UCO) …

    gatech Repository record for Stylized Benchmark Description and Reference Solutions for the Pin-Fueled Small Modular Advanced High Temperature Reactor (opens in a new tab)

  14. THERMAL-HYDRAULICS MODELING AND SAFETY ANALYSIS OF ADVANCED REACTOR SYSTEMS

    … advanced reactors, such as liquid metals, molten salts, and gases. In addition, thermal-hydraulic and neutronic simulations during transients is also an important step in forwarding advanced reactors and demonstrating favorable reactor and safety response to postulated accidents. This work focuses …

    utk-theses Repository record for THERMAL-HYDRAULICS MODELING AND SAFETY ANALYSIS OF ADVANCED REACTOR SYSTEMS (opens in a new tab) Embargoed until 2027-08-01

  15. MICROSTRUCTURE, MECHANICAL PROPERTIES, AND ION IRRADIATION OF NI-BASED ALLOYS FOR MOLTEN FLUORIDE SALT APPLICATIONS

    … temperature applications, including for fluoride-salt-cooled nuclear energy systems such as molten salt reactors (MSRs) and fluoride-salt-cooled high temperature reactors (FHRs). These energy systems’ upper-operating temperature is limited by available structural materials options. Legacy alloys …

    utk-theses Repository record for MICROSTRUCTURE, MECHANICAL PROPERTIES, AND ION IRRADIATION OF NI-BASED ALLOYS FOR MOLTEN FLUORIDE SALT APPLICATIONS (opens in a new tab) Embargoed until 2027-05-01

  16. Multiphysics Performance and Safety Analysis for Advanced High Temperature Reactors

    … are 1) prismatic high temperature gas cooled microreactors, 2) pebble bed fluoride salt cooled high temperature reactors, and 3) pebble bed high temperature gas cooled reactors. The goals and approaches on the various studies for these concepts differ but each study has the underlying …

    utk-theses Repository record for Multiphysics Performance and Safety Analysis for Advanced High Temperature Reactors (opens in a new tab)

  17. Neutronic analysis and optimization of the advanced high temperature reactor fuel design using machine learning

    The Liquid Salt Cooled Reactor (LSCR) is a graphite moderated and liquid salt cooled reactor The LSCR is designed with the intention of providing superior economics and safety compared to the current commercial light water reactors. Due to estimated similar capital cost and a significantly higher …

    gatech Repository record for Neutronic analysis and optimization of the advanced high temperature reactor fuel design using machine learning (opens in a new tab)

  18. Carbon Effects on Corrosion in Molten Fluoride Salt

    The fluoride salt-cooled high temperature reactor (FHR) is a Generation IV reactor concept that uses molten fluoride salt as the primary coolant to enable breakthrough improvements in economics and safety over the current generation of reactors. However, graphite fuel elements and other carbon …

    gatech Repository record for Carbon Effects on Corrosion in Molten Fluoride Salt (opens in a new tab)

  19. Design and Simulation of Novel Sabatier Reactors for the Thermocatalytic Conversion of CO2 into Renewable Natural Gas

    … facility. First, a heat-exchanger type, molten salt-cooled membrane reactor is analyzed using a transient mathematical model that accounts for dynamic catalyst deactivation. The simulation results showed significantly lower catalyst deactivation rates in the membrane reactor due to the …

    waterloo Repository record for Design and Simulation of Novel Sabatier Reactors for the Thermocatalytic Conversion of CO2 into Renewable Natural Gas (opens in a new tab)

  20. Fuel cycle cost and fabrication model for fluoride-salt high-temperature reactor (FHR) "Plank" fuel design optimization

    The fluoride-salt-cooled high-temperature reactor (FHR) is a novel reactor design benefitting from passive safety features, high operating temperatures with corresponding high conversion efficiency, to name a few key features. The fuel is a layered graphite plank configuration containing enriched …

    gatech Repository record for Fuel cycle cost and fabrication model for fluoride-salt high-temperature reactor (FHR) "Plank" fuel design optimization (opens in a new tab)

Page 1 of 2