Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 35 for “"Sample Dimensions"”.
-
A fundamental approach using theories of elasticity to study texture-related mechanical properties of foods
… system. Slabs of 1% agar gel, prepared in three sample dimensions were indented with seven flat cylindrical indenters. Results obtained from the indentation test were compared with those obtained by a uniaxial compression test. It was postulated that the indentation test could be used to measure …
-
Electrical studies on nickel ferrites and hybrid organic-inorganic semiconductors
… measurements are performed on ferrite samples and a hybrid organic-inorganic p-n junction. Impedance and resistivity measurements are performed to investigate conducting properties of nickel ferrite and their dependence on growth temperature, composition, and sample dimensions. …
-
Measurement of the thermal conductivity of thin solid films with a thermal comparator
… element method was used to estimate the minimum sample dimensions required for accurate results, and the variation of the thermal constriction resistance with the assumed mode of heat flow between the comparator probe tip and the test specimen.
-
Influence of Composition and Processing Methods on the Microstructure and Properties of Co-Cr-Fe-Mn-Ni High Entropy Alloys
… all demonstrated significant impact on resulting sample dimensions. Comparative analyses revealed that sintering by hot isostatic pressing produced superior density and reduced defects compared to casting and LP-DED. This study highlights the influence of alloy composition, manufacturing …
-
Contribuição ao estudo das argilas orgânicas de Pernambuco
… a thickness of 24 meters several shelby tube samples 2,5 inches O.D. were taken in three borings, in which laboratory vane, consolidation, unconfined compression, drained and undrained triaxial test were performed. The influence of sample disturbance and remolding on test results is discussed, …
-
The effect of process parameter variation on the emissivity and resistivity of 316L stainless steel manufactured by Selective Laser Melting
… SLM parts were similar to cast parts, but the 0° samples were consistently higher. SLM resistivity was also consistently higher than cast parts over the entire measured temperature range. When emissivity was determined using surface area from nominal sample dimensions measured using callipers, …
-
The Multi-Terminal Hall Generator
… expression is obtained as a function of sample dimension, conductivity and Hall coefficient of the material, and magnetic field strength. Some of the results have been checked experimentally with indium antimonide and fields up to 21.5 kilogauss. An efficiency of 40% was obtained …
-
Investigation into the mechanical performance of pipe grade HDPE with included silicon chips as a basis for future sensors
… of the pipes. In order to test a large number of samples, small polyethylene samples were produced using compression moulding and tested in different stress modes such as tension, bending, Charpy impact and flexural creep, with respect to different chip sizes (4 and 16mm\(^²\)), shapes (circle and …
-
THERMAL MEASUREMENTS USING LASER FLASH ANALYSIS AND FREQUENCY-DOMAIN THERMOREFLECTANCE
… measurements have strict requirements on the sample dimensions and states, making it hard to measure most unconventional samples. Laser flash analysis (LFA) is a convenient and reliable method of determining different materials' thermal diffusivity and thermal conductivity. Apart from LFA, …
-
Optical dielectric properties of YBa2Cu3O6+x and Ba1-xKxBiO
… (RAE) and modified it to allow measurement of samples significantly smaller than the extent of the incident beam (sample dimensions of about O.lmm are possible). In this work, normal state (room temperature) dielectric properties of two high temperature superconducting systems are studied as a …
-
Evaluation of Test Specimen Geometry of Asphalt Mixes Tested with the Asphalt Mixture Performance Tester
… issue with performance testing with test sample geometries, resulting in variability. The purpose of this research is to develop appropriate sample geometry for AMPT test for accurate characterization of asphalt mix and ease of testing. Four sample geometries were fabricated for three mix …
-
Study of the reaction of pyrrhotite with sulphur dioxide
… thickened at the expense of pyrrhotite, sample dimensions remaining constant. Observations of partially oxidized samples have indicated a linear reaction front and the lack of retained pyrrhotite. Weight loss curves have indicated two types of behaviour: constant rate with increasing …
-
An investigation into the network structures of eThylene propylene terpolymer elastomers
… vulcanizates and by assessing the effects of sample dimensions and the degree of swelling. The technique of compression modulus is much more widely applicable than previously thought. The basic structure of an ethylene propylene terpolymer network appears to be independent of the type of cure …
-
Evaluation of Ultrasonic Velocity Tests to Characterize Extraterrestrial Rock Masses
… by evaluating the effects of physical sample properties on the signal attenuation of ultrasonic waves. An initial review of standard laboratory UPV testing methods and expected space conditions isolated four key disparities between the two testing environments: (1) sample dimensions, …
-
A Concept Learning Model
… if the two stimuli differed on the dimension sampled; the latter tendency is referred to as "negation." A model was proposed in which it is assumed that Ss randomly sample dimensions and compare the "test" stimulus on any trial with a previously reinforced 0comparison ° stimulus. The …
-
Measurement of adhesion between soft elastomers with different mixing ratios
… are proposed as prerequisites to determine sample dimensions in designing experiments. Also, the work of adhesion between two commonly used soft elastomers PDMS (Sylgard 184) and Ecoflex 0300 are obtained with the measured pull-in and pull-off forces from a dynamical mechanical analyzer. The …
-
Size Effects in Ferromagnetic Shape Memory Alloys
… and 10 µm were cut on a single crystalline bulk sample oriented along the [110] direction in the compression axis and with fully reversible two-stage martensitic transformation. The results revealed size dependent two-stage martensitic transformation which was suppressed for pillar sizes of 1 µm …
-
The chemical and mechanical behaviors of polymer / reactive metal systems under high strain rates
… impact tests with different impact velocities, sample dimensions and sample configurations were conducted on the composite, equipped with a high-speed camera for tracking transient images during the sudden process. SHPB and Instron tests were carried out to obtain the stress vs. strain curves of …
-
Development of a Biaxial Inflation Stretch Test for Flexible Electronics
… systems often experience strain in multiple dimensions. This indicates a potential for misrepresentation of the failure modes of these materials in application if strictly characterized using uniaxial methods. In this research, an innovative test method is proposed in which a polymer …
-
Measurements of the trapped flux in a long hollow superconducting cylinder
… function of the externally applied field and the sample dimensions, and could be less than the critical field Hc. In contrast to these results one would predict from Maxwell's equations, together with the infinite conductivity of a superconductor, that it should be possible to trap and maintain …
Page 1 of 2