Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 34 for “"Sand Casting"”.

  1. Sand casting benchmarking: Questionnaire development, analysis and participant evaluation.

    This research focused on obtaining information on sand casting practices and providing participants in the research with feedback. It also focused on determining if any significant relationships existed among the data. A detailed questionnaire, containing 96 questions, was developed and sent to …

    wvu Repository record for Sand casting benchmarking: Questionnaire development, analysis and participant evaluation. (opens in a new tab)

  2. Aluminum sculpture: assemblage compositions in full mold sand casting

    … to shape and shape relationships; however, the casting process, through warpage and surface distortion, can change the end result. The surface and shape changes that occur promote a feeling of rawness which is accepted or promoted by the finish. The finish also enforces the idea of parts and …

    colostate Repository record for Aluminum sculpture: assemblage compositions in full mold sand casting (opens in a new tab)

  3. Respiratory exposure during the additive manufacturing of sand casting moulds

    Background: During additive manufacturing (AM) of sand casting moulds, potential dust species of unknown particle size or mineral composition, and hazardous chemical substances (HCS's) such as silica (crystalline), volatile organic compounds (VOC's) and polycyclic aromatic hydrocarbons (PAH's) are …

    nwu-za Repository record for Respiratory exposure during the additive manufacturing of sand casting moulds (opens in a new tab)

  4. Nd: YAG laser welding of ZE41A-T5 magnesium sand casting alloy

    Butt joints of ZE41A-T5 plates with two thicknesses (2 and 6 mm) were laser welded using 1.6 mm EZ33A-T5 filler wire and a continuous wave Nd:YAG system with variable laser process parameters; power (2.5--4 kW), welding speed (2--7 m/min), joint gap (0--0.6 mm) and defocusing distance (0 to -4 mm). …

    concordia Download PDF for Nd: YAG laser welding of ZE41A-T5 magnesium sand casting alloy (opens in a new tab)

  5. Gravity and Centrifugal Casting of Light Metal Alloys Using Rapidly Produced Sand Moulds

    Traditional sand casting is a well understood method to produce metal shapes and has been used for many years in industry. It is a relatively simple method but has a significant drawback, with the requirement of a pattern to form the internal cavity. Patterns are produced at high cost through …

    auckland-tech Repository record for Gravity and Centrifugal Casting of Light Metal Alloys Using Rapidly Produced Sand Moulds (opens in a new tab)

  6. Caracterização microestrutural de ligas eutéticas de alumínio no estado bruto de fusão e tratadas termicamente por homogeneização

    … Cu-Si-Mg (quaternary) systems were produced by sand casting. The alloys were analyzed microstructurally in the as-cast condition and after homogenizing heat treatment at 495 ° C for until 24 hours, via x-rays fluorescence (FRX), x-rays diffraction (XRD) and scanning electron microscopy (SEM) …

    brazil-ufrn Repository record for Caracterização microestrutural de ligas eutéticas de alumínio no estado bruto de fusão e tratadas termicamente por homogeneização (opens in a new tab)

  7. Inorganic foundry binders for sustainable sand molding

    A good sand mold is an indispensable prerequisite to obtaining a good metal casting. Although sand casting is one of the oldest metal forming technique known to humans, research for alternative molding materials has never stopped, most notably to meet increasing demand for quality, better economics …

    aalto Repository record for Inorganic foundry binders for sustainable sand molding (opens in a new tab)

  8. Implementation of Stereolithography in Rapid Prototyping for Sand Castings

    … in the use of Rapid Prototyping Systems. The casting industry, because of increasing world competition, alternative material advancements and an industry push towards reduced product lead times, would benefit from rapid prototyping. This thesis explores the feasibility of using patterns made …

    marquette Repository record for Implementation of Stereolithography in Rapid Prototyping for Sand Castings (opens in a new tab)

  9. Implementation of Stereolithography in Rapid Prototyping for Sand Castings

    … in the use of Rapid Prototyping Systems. The casting industry, because of increasing world competition, alternative material advancements and an industry push towards reduced product lead times, would benefit from rapid prototyping. This thesis explores the feasibility of using patterns made …

    marquette Repository record for Implementation of Stereolithography in Rapid Prototyping for Sand Castings (opens in a new tab)

  10. CHARACTERIZING DEFECTS IN SAND CAST MAGNESIUM ALLOY COMPONENTS

    … gearboxes. The U.S. Army (USA) currently uses sand cast magnesium alloys in their helicopter transmission gearboxes. As the cost of fuel and the need for implementing lightweight technology increases in the Department of Defense (DoD), magnesium alloys remain a promising material. Although sand …

    nps Repository record for CHARACTERIZING DEFECTS IN SAND CAST MAGNESIUM ALLOY COMPONENTS (opens in a new tab)

  11. Fluidity of aluminum in green sand molds

    Production of casting in sand molds is the basic original method employed by the foundry industry. Other methods are the results of the technological advances, but none has resulted in the extreme flexibility of the sand casting process. The control of the sand properties is important in order to …

    vt Repository record for Fluidity of aluminum in green sand molds (opens in a new tab)

  12. Metal Additive Manufacturing for early concept Validation

    … of parts manufactured using high pressure die casting (HPDC). Prototypes made using sand casting can only reach 70% of the strength of production HPDC parts, which is not ideal for early testing. As printed, the strength of AM aluminum alloys manufactured with Powder Bed Fusion – Laser Beam …

    chalmers Repository record for Metal Additive Manufacturing for early concept Validation (opens in a new tab)

  13. The Design Improvement of a Sand-Cast Aluminum Part Using Computer Simulation of Mold Filling and Solidification Process

    <p>In this thesis the casting design improvement of a manufactured sand-cast aluminum part was considered. The cast part is used as a small part of a larger tool in the textile industry. It consists of a cylindrical hub region, attached to a flange, with three symmetrical "legs" extending outward …

    ut-knoxville Repository record for The Design Improvement of a Sand-Cast Aluminum Part Using Computer Simulation of Mold Filling and Solidification Process (opens in a new tab)

  14. The Role of Cooling Rate on Microstructure in Sand-Cast Aluminum A205

    Modern aerospace castings consist of highly complex geometries that require solidification simulations to optimize fill pathways so to control the thermal evolution and thus microstructure during solidification. Accurate solidification simulations require knowledge of the melt physical properties, …

    queens Repository record for The Role of Cooling Rate on Microstructure in Sand-Cast Aluminum A205 (opens in a new tab)

  15. Indirect Fabrication of Lattice Metals with Thin Sections Using Centrifugal Casting

    … it is relatively challenging to produce casting products with lattice or honeycomb shapes having sophisticated geometries. In spite of the scalable potential of periodic cellular metals to structural applications, the manufacturing methods of I∙AM Casting have been not actively explored …

    unt Repository record for Indirect Fabrication of Lattice Metals with Thin Sections Using Centrifugal Casting (opens in a new tab)

  16. Process planning for an Additive/Subtractive Rapid Pattern Manufacturing system

    … presents a rapid manufacturing process for sand casting patterns using a hybrid additive/subtractive approach. This includes three major areas of research that will enable highly automated process planning; a critical need for a rapid methodology.</p> <p>The first research area yields a …

    iastate Repository record for Process planning for an Additive/Subtractive Rapid Pattern Manufacturing system (opens in a new tab)

Page 1 of 2