Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 79 for “"Sandblasting"”.

  1. Implementation of lean method and value analysis in the sandblasting production shop at Intersign Corporation

    … products, and the main subject in this study, is sandblasting products. Sandblasting production is a job shop operation which is placed in a 55 x 100 ft building (building B). In the near future, the company will expand this production by moving several workstations into the new building, …

    utc Repository record for Implementation of lean method and value analysis in the sandblasting production shop at Intersign Corporation (opens in a new tab)

  2. Effect of surface treatment on porcelain bond strength to titanium

    … coating, group 3 TiN sputter coating, group 4 Sandblasting Al2O3 125μm, group 5 Sandblasting Al2O3 180μm, group 6 Sandblasting Al2O3 250μm, group 7 Sandblasting Al2O3 125μm then gold sputter coating, group 8 Sandblasting Al2O3 180μm then gold sputter coating, group 9 Sandblasting Al2O3 250μm …

    bu Repository record for Effect of surface treatment on porcelain bond strength to titanium (opens in a new tab)

  3. Effect of Chemical and Mechanical Surface Treatment on Tensile Bond Strength and Mode of Failure With Soft Liners on Additive Manufactured Denture Bases

    … to 6 groups (n = 10): control (no treatment), sandblasting (50 µm Al2O3; 2 bar; 10 s; 10 mm distance), Coe-Soft monomer application (180 s), sandblasting followed by Coe-Soft monomer application, GC Reline II Primer application (30 s; air dry 5 s), and sandblasting followed by GC Reline II …

    tamu Repository record for Effect of Chemical and Mechanical Surface Treatment on Tensile Bond Strength and Mode of Failure With Soft Liners on Additive Manufactured Denture Bases (opens in a new tab) Embargoed until 2028-05-01

  4. Effect of Chemical and Mechanical Surface Treatment on Tensile Bond Strength and Mode of Failure With Soft Liners on Additive Manufactured Denture Bases

    … to 6 groups (n = 10): control (no treatment), sandblasting (50 µm Al2O3; 2 bar; 10 s; 10 mm distance), Coe-Soft monomer application (180 s), sandblasting followed by Coe-Soft monomer application, GC Reline II Primer application (30 s; air dry 5 s), and sandblasting followed by GC Reline II …

    tamu Repository record for Effect of Chemical and Mechanical Surface Treatment on Tensile Bond Strength and Mode of Failure With Soft Liners on Additive Manufactured Denture Bases (opens in a new tab) Embargoed until 2028-05-01

  5. Effect of Chemical and Mechanical Surface Treatment on Tensile Bond Strength and Mode of Failure With Soft Liners on Additive Manufactured Denture Bases

    … to 6 groups (n = 10): control (no treatment), sandblasting (50 µm Al2O3; 2 bar; 10 s; 10 mm distance), Coe-Soft monomer application (180 s), sandblasting followed by Coe-Soft monomer application, GC Reline II Primer application (30 s; air dry 5 s), and sandblasting followed by GC Reline II …

    tamu Repository record for Effect of Chemical and Mechanical Surface Treatment on Tensile Bond Strength and Mode of Failure With Soft Liners on Additive Manufactured Denture Bases (opens in a new tab) Embargoed until 2028-05-01

  6. Effect of surface treatments on microtensile bond strength of repaired aged silorane resin composite

    … (no treatment, acid treatment, aluminum oxide sandblasting and diamond bur abrasion) were tested. Each treatment group was randomly divided in half and repaired with either silorane resin composite (LS adhesive) or methacrylate based resin composite (Filtek Z250/Single Bond Plus). Specimens …

    iupui Repository record for Effect of surface treatments on microtensile bond strength of repaired aged silorane resin composite (opens in a new tab)

  7. The effect of real time and accelerated aging on the physical and mechanical properties of YTTRIA partially stabilized zirconia

    … normal saline solution at 37°C in an incubator. Sandblasting was performed using a PrepStar® system with Al2O3 50μm particle size at pressure of 60 psi, rate 4.2 gram/minute. Grinding with a Buehler AutoMet 250 was performed using a 240 μm diamond disc with a 0.0034 kg/mm2 load and speed of 120 …

    bu Repository record for The effect of real time and accelerated aging on the physical and mechanical properties of YTTRIA partially stabilized zirconia (opens in a new tab)

  8. Novel technique for solar power capture using plastic optical fibres

    … of modification are investigated, grooves and sandblasting. The roughened surface of the POF scatters the incident light into the fibre core some of which is refracted out of the fibre while some other undergoes total internal reflection (TIR) and propagates inside the core and is finally …

    london-metro

  9. Transport of contaminated sediments over a small industrialized watershed

    … on the environment is residues generated during sandblasting operations. This study considers a single case of sandblasting ship components with spent nickel-copper slag abrasives at Naval Shipyard Mare Island near Vallejo, California. Ship parts are cleaned for repainting in a large open area …

    utk-theses Repository record for Transport of contaminated sediments over a small industrialized watershed (opens in a new tab)

  10. Shear bond strength between a dual-curing luting composite and subtractively vs. additively processed hybrid ceramics

    … groups: Control, Silanization, 50 μm Al₂O₃ sandblasting, Sandblasting+silanization, 9% hydrofluoric acid etching, Etching+silanization. Surface characteristics were analyzed through surface roughness (Ra), and surface free energy (SFE) quantification, and scanning electron microscopy (SEM). …

    fu-berlin Repository record for Shear bond strength between a dual-curing luting composite and subtractively vs. additively processed hybrid ceramics (opens in a new tab)

  11. analysis of the hydrogen embrittlement susceptibility of industrial zn-ni brush plating process

    … SLT test. However, it was shown that by avoiding sandblasting in the pre-plating sample preparation stage, the results of the SLT improve significantly. Samples without sandblasting passed the SLT while those sandblasted failed after 11 h only. Another important finding was the outward diffusion …

    concordia Download PDF for analysis of the hydrogen embrittlement susceptibility of industrial zn-ni brush plating process (opens in a new tab)

  12. Experimental Investigation of Single and Two-Phase Heat Transfer Performance in Microchannels with Surface Modifications and Multiple Inlet Restrictors

    … The surface modification techniques knurling and sandblasting, two methods which are conventionally used in macro duct flow systems, were experimentally investigated for the first time to improve the single-phase microchannel heat transfer performance. A micro-knurled surface technology was found …

    south-carolina Repository record for Experimental Investigation of Single and Two-Phase Heat Transfer Performance in Microchannels with Surface Modifications and Multiple Inlet Restrictors (opens in a new tab)

  13. Mineral dust production in the Bodele depression, Northern Chad

    … using outputs from a dust emission and sandblasting model.Findings showed that sandblasting is significantly correlated with dust emission and plays akey role in dust emission. The spatial variation in dust emission at the field study area resultsfrom spatially heterogeneous aeolian …

    salford Download PDF for Mineral dust production in the Bodele depression, Northern Chad (opens in a new tab)

  14. New insights into dust aerosol entrainment mechanisms from satellite/ground-based data, climate modeling, and wind-tunnel experiments

    … physical mechanisms of dust emission in sandblasting and direct aerodynamic entrainment. Results indicate that surface roughness can control dust emission in direct aerodynamic entrainment and that dust emission by direct aerodynamic entrainment can be significant under certain conditions …

    texas Repository record for New insights into dust aerosol entrainment mechanisms from satellite/ground-based data, climate modeling, and wind-tunnel experiments (opens in a new tab)

  15. Μελέτη της αντοχής του μεταλλοκεραμικού δεσμού επί χυτών τιτανίου κάτω από διαφορετικές συνθήκες χύτευσης

    … samples of the group A were treated only with sandblasting. After sandblasting a mapping examination in a selected sample of each group was made for detection of Al and Zr from the sandblasting procedure and the coating, respectively.30 solid cast samples were selected for every group after …

    greece Repository record for Μελέτη της αντοχής του μεταλλοκεραμικού δεσμού επί χυτών τιτανίου κάτω από διαφορετικές συνθήκες χύτευσης (opens in a new tab)

  16. Comparison of adherence of self-cured adhesive resin cement to lithium disilicate ceramics and ceramic resin composites using fracture mechanics

    … Lava Ultimate received two surface treatments : sandblasting and Rocatec soft. All samples were bonded using an adhesive and resin cement and stored in water at 37°C. After 24h storage, half of the specimens from each group were tested to determine the interfacial KIC using an Instron universal …

    ubc Repository record for Comparison of adherence of self-cured adhesive resin cement to lithium disilicate ceramics and ceramic resin composites using fracture mechanics (opens in a new tab) Download PDF for Comparison of adherence of self-cured adhesive resin cement to lithium disilicate ceramics and ceramic resin composites using fracture mechanics (opens in a new tab)

  17. Ανάπτυξη διεργασιών για την επεξεργασία και την ανακύκλωση υγρών και στερεών αποβλήτων

    … research focused on solid waste recycling from sandblasting operations in shipbuilding industry aiming at used Ni - Fe slag recovery in order to use it in sandblasting operations. The innovation was the design of recycling unit with small size. It was characterized by the advantages of low …

    greece Repository record for Ανάπτυξη διεργασιών για την επεξεργασία και την ανακύκλωση υγρών και στερεών αποβλήτων (opens in a new tab)

  18. Bonding properties of innovative CAD-CAM composite biomaterials for dental prostheses

    … acid etching or with alumina particles sandblasting followed by silanization (Monobond Plus, Ivoclar Vivadent). All specimens were bonded using Variolink DC (Ivoclar Vivadent) resin cement and submitted to thermocycling aging (10000 cycles). The interfacial toughness was measured using …

    liege Repository record for Bonding properties of innovative CAD-CAM composite biomaterials for dental prostheses (opens in a new tab)

  19. Investigation of the laser cleaning process for ibs grids in optical coating technology /

    … shutter as an alternative to manual cleaning and sandblasting in terms of the surface morphology, roughness and speed. It has been demonstrated that processing with a nanosecond fiber laser might be applied for the controlled cleaning of complex grid surfaces at high speed and low surface impact …

    vilnius Repository record for Investigation of the laser cleaning process for ibs grids in optical coating technology / (opens in a new tab)

Page 1 of 4