Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 99 for “"Sapphire substrate"”.
-
Terahertz Spectroscopy of vanadium dioxide films grown on a-plane sapphire substrate
… VO2 films have been obtained using different substrates and deposition techniques. Among the various substrates used, sapphire is one of the most common ones due to important attributes such as crystalline quality, mechanical stability, and optical transparency in a wide range of frequencies. …
-
RAMAN SPECTROSCOPY CHARACTERIZATION OF PULSED LASER DEPOSITION GROWN ZNTE THIN FILMS ON SAPPHIRE SUBSTRATE
… this thesis, the epitaxy of ZnTe thin films on sapphire substrate by Pulsed Laser Deposition system at different growth temperatures is studied. The texture analysis is inspected by Two Dimensional X-Ray Diffraction. The lattice constant of the films and strain studies are investigated by High …
-
Growth of Wurtzite Gallium Nitride Epitaxial Films on Sapphire Substrate by Reactive Molecular Beam Epitaxy and Material Characterization
For the growth of n-type films, a specific ammonia flow rate (or V/III ratio if Ga flux is fixed) was required to obtain films with high electron Hall mobility. X-ray diffraction (XRD), photoluminescence (PL), cross-sectional transmission microscopy (XTEM) and deep level transient spectroscopy …
-
Optical properties of doped and undoped Vanadium dioxide thin films on Sapphire substrate at near-infrared and terahertz frequencies
… of VO2 thin films deposited on each side of a sapphire substrate. This approach allows for larger amplitude modulation which is an important requirement in optical switching applications.
-
Development of nano-patterned sapphire substrates for deposition of AlGaInN semiconductors by molecular beam epitaxy
… the design and fabrication of nano-patterned sapphire substrates (NPSS) as well as the growth by molecular-beam epitaxy (MBE) on such substrates of AlGaN and InGaN multiple quantum wells (MQWs). In recent years a number of LED manufacturers are developing nitride LED devices emitting in the …
-
Comparison of Gallium Nitride High Electron Mobility Transistors modeling in two and three dimensions
… operation. This thesis looks at using diamond substrate to improve the thermal management of a HEMT device over that of a sapphire substrate. The improved thermal management should lead to improved operating characteristics and reliability. The HEMT device was modeled using Silvaco software …
-
Inverted vertical AlGaN deep ultraviolet LEDs grown on p-SiC substrates by molecular beam epitaxy
… However, as of yet, deep UV LEDs grown on sapphire substrates are neither efficient enough nor powerful enough to fully serve these and other potential applications. The majority of UV LEDs reported so far in the literature are grown on sapphire substrates and their design consists of AlGaN …
-
Light Extraction Enhancement of GaN Based LEDs Using Top Gratings, Patterned Sapphire Substrates, and Reflective Surfaces
… solutions include surface roughening, patterned sapphire substrates, and reflective layers. This study proposes to increase external quantum efficiency and optimize light extraction efficiency of several LED structures using finite difference time domain analysis (FDTD). The structures under …
-
Growing anatase and rutile titania on c-cut sapphire using pulsed-laser deposition
… phases of titanium dioxide on different substrates. I also report a pulsed-laser deposition growth protocol that facilitates the growth of both anatase and rutile phases of titania without changing the substrate or target material. Finally, I also demonstrate the development of the first …
-
Structural and Morphological Analyses of Aln and Algan Layers
… systems and others. Due to the lack of native substrates, sapphire is being used most abundantly for growing III-nitride based deep-UV device structures. Due to highly lattice mismatched hetero epitaxial growth of deep-UV structures on sapphire substrates, the efficiency of Deep UV LEDs is …
-
Selektyvus GaN dangos atkėlimas nuo safyro padėklo ultratrumpaisiais šviesos impulsais /
… process when GaN film is transferred from sapphire/silicon carbide substrate to the substrate of better thermal conductivity, like copper. Currently there is only a few researches, where lift-off is done with ultrashort laser pulses. Smaller heat affected zone of ultrashort laser pulses …
-
Thin film technology for optoelectronics and their thermal management
… micrometer-thick device layers from their native substrates and transfer them onto new platforms to optimize system performance and integration. The understanding of thermal management for such devices is very important in order to control the junction temperature effectively. Here, the …
-
RF MEMS Switches with Novel Materials and Micromachining Techniques for SOC/SOP RF Front Ends
… low cost, flexible liquid crystal polymer (LCP) substrate. Its very low water absorption (0.04%), low dielectric loss and multi-layer circuit capability make it very appealing for RF Systems-On-a-Package (SOP). Also, a tunable RF MEMS switch on a sapphire substrate with BST as dielectric material …
-
GaAs Growth on Sapphire Substrates (C and R Plane) for Integrated Microwave Photonics (IMWP)
… hybrid photonic circuits to meet future needs. Sapphire platforms have the potential to integrate all-in-one, for instance, light source, analog signal processing, light detection, CMOS control circuit, silicon on sapphire to achieve high-performance, low-cost mixed-signal optical links etc. …
-
High Density Plasma Etching of Wide Bandgap Semiconductor Materials for Fabricating Novel Devices
… mum gate-length AlGaN/GaN HEMTs using ICP-RIE on sapphire substrate. These devices exhibited high DC and RF performance. The drain current density as high as 1.31 A/mm, a peak transconductance of 401 mS/mm, an fT of 107 GHz and an f max of 148 GHz were measured on these devices. To the best of the …
-
Thermal boundary resistance in YBCO THz microbolometers at room temperature
… and is deposited on a crystalline Al2O3 (sapphire) substrate. Phonons, the quasi-particles associated with the lattice vibrations, transport the heat from the _lm to the substrate, but are scattered in this process. This scattering is macroscopically represented by the thermal resistance. …
-
Growth, Properties, and Applications of Transition Metal Dichalcogenide Nanocrystals
… disperse the solution-based TMD NCs on a substrate for device fabrication since the dispersed NCs can easily aggregate. Here, we put forward a novel CVD method to grow closely-spaced TMD NCs and explored the growth mechanism and attempts on the size control. Their applications acting as …
-
Reduced Defect Density Nalgan Template Layer for Improved Output Deep-UV LED
… Lateral Overgrowth AlN or AlN grown on Patterned Sapphire Substrate. A Rough/Smooth style superlattice with a high number of periods yields the best crystal quality and lowest strain nAlGaN layer. By optimizing the temperature of the nAlGaN layer, and using the optimized AlN and superlattice …
-
The kinetics of incongruent reduction between sapphire and Mg-Al melts
The kinetics of incongruent reduction between sapphire and oxygen-controlled Mg-Al melts was studied by measuring spinel-layer thickness, sample-weight change and sample-thickness change as a function of time at various temperatures. To eliminate the crucible contamination caused by impurities in …
-
Design and fabrication of polarized InGaN light-emitting diodes and THz polarizer based on subwavelength metallic nanogratings
… polarized surface emitting InGaN/GaN LED on sapphire substrate. Our finding suggests an effective way to make polarized light emitting devices, without using special oriented substrate, complex design, fabrication and packing process. We also investigated the extension of this technology to …
Page 1 of 5