Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 95 for “"Saturation current"”.
-
High-speed and high-saturation-current partially depleted absorber photodetecters [i.e. photodetectors
… primary limiting factors for high-speed and high-saturation-current photodetecters are the space charge effect and thermal failure. A partially depleted absorber (PDA) photodiode is a novel approach that incorporates space charge balancing by placing a p-doped absorber and an n-doped absorber on …
-
EXPERIMENTAL STUDY OF GEODESIC ACOUSTIC MODE IN THE STOR-M TOKAMAK
… STOR-M, we measured floating potential and ion saturation current. Around 9 ms into the discharge, the end of ramp-up region and the beginning of the flat-top region, we found a dominant peak around 30 kHz in the power spectral densities of ion saturation current. The ion saturation current …
-
IMPEDANCE SPECTROSCOPY OF SILICON SOLAR CELLS
… contribution to knowledge here was that emitter saturation current density effects the shape i.e. height of the semicircular-shape of the Nyquist plots the most. In addition, simplified RC equivalent circuit was fitted to two of the Nyquist plots, and charge transfer resistance plotted against …
-
Rear Local Contact Formation for High-efficiency Crystalline Silicon Wafer Solar Cells
… losses. For n-type PERT cells, the emitter saturation current at the rear local contact is increased after laser ablation, and is injection-level dependent. Limitations of different methods to determine the series resistance of Al-LBSF solar cells are also discussed. A severe underestimation …
-
MODELLING, SIMULATION, FABRICATION AND CHARACTERISATION OF ALGAN/GAN FIN-GATE HIGH ELECTION MOBILITY TRANSISTERS (FIN-HEMTS)
… physical models on threshold voltage and saturation current of fin-gate MIS-HEMTs have been established and verified. Subsequently, fin-gate MIS-HEMTs towards improved electrical performances are designed, fabricated, and characterised. The static I-V characterisations indicate that …
-
Multiphysics Design and Modeling for Advanced Packaging and Heterogeneous Integration of Power Delivery
… and an air gap. This configuration enhances saturation current capacity and overall performance, mitigating the common low-saturation current limitation in embedded inductors. For multiphysics modeling, an augmented computational method is developed, using a frequency-domain approach with …
-
FinFET standard cell optimization for performance and manufacturability
… has been done. The characterization is based on saturation current, leakage current, implantation angle and the average edge placement error at metal one layer. Three design variables, including the metal pitch, the fin pitch and the fin width are optimized to achieve better design quality. …
-
High-density high-efficiency power magnetics
… develops a concept which results in doubling the saturation current of a high current PI with NdFeB permanent magnet (PMPI). By adding a well-designed small piece of fabricated NdFeB magnet in the air gap of the PI, the saturation current of the PMPI is doubled with the same size and inductance …
-
Safe Thermal Operation of Power Transistors Under Pulsed Excitation
… in the transistor junctions, collector saturation current, and thermal resistance. In the approach set forth in this paper, the theory of solid state heat flow is applied to a simplified thermal model of a power transistor.
-
Physics and engineering of organic solar cells
… of the devices to understand the reverse saturation current, which is related to efficiency, and the effects of area scaling. The most commonly accepted models to describe the physics of organic photovoltaic devices are reviewed and applied to planar heterojunction solar cells based on …
-
Excellent Surface Passivation for High Efficiency C_Si Solar Cells
… the effective carrier lifetime of 3 ms and saturation current density of 5 fA/cm2. In addition, we present a simple and effective technique to extract values of electron/hole capture cross-section for the purpose of analyzing the interface passivation quality from already measured surface …
-
An investigation of an ionic liquid analog to the conventional metal-oxide-semiconductor field-effect transistor
… and overdrive voltages in a region below the saturation current of the transistor. The concept of the design was successfully verified, although further improvements in electrode positioning and manufacturing precision are warranted.</p>
-
Investigation and Design of Broadband and High-Output Power Uni-Traveling-Carrier Photodiodes
… performance. In this thesis, the bandwidth and saturation current of UTC-PD is investigated by using physics-based modeling. To further improve the performance, novel device structures are proposed. On the one hand, a graded bandgap structure is employed in the absorption layer. It is shown …
-
Boron tribromide sourced boron diffusions for silicon solar cells
… surface recombination (reducing the emitter saturation current density) for all boron diffusions. The heavy boron diffusion process was incorporated into the single side buried contact solar cell processing sequence. The solar cells fabricated had both boron diffused and Al/Si alloyed P+ …
-
Lithography variability driven cell characterization and layout optimization for manufacturability
… Based on the impact of contact resistance on the saturation current, robust S/D contact layout optimization by minimizing the lithography variation as well as by maximizing the saturation current without any leakage penalty is performed. Third, this dissertation describes the first layout …
-
Lithium ion source for satellite charge control
… investigates the dependence of the emitted ion current on several parameters: source temperature (power input), source bias potentials and potentials applied to simulated spacecraft geometries. Saturation current of about 5.8 micro amp were measured at an extraction potentials of 100 Volts from …
-
DETERMINATION OF THE SOLAR CELL EQUATION PARAMETERS: NEW METHODS, EXISTING METHODS, ANALYSIS AND COMPARISON.
… with the diode ideality factor and the reverse saturation current. These methods are based on the network analysis of the single-exponential lumped constant parameters model which has been accepted as being operationally sufficient to describe the current-voltage characteristics of the solar …
-
CHARACTERISATION OF CRYSTALLINE SILICON SOLAR CELLS AND PHOTOVOLTAIC MODULES USING LUMINESCENCE IMAGING
… in this work, the series resistance and dark saturation current density of individual cells within a PV module can be estimated, along with their fill factor and efficiency, and that of the entire PV module, thus enabling an in-depth diagnosis of their performance.
-
Krūvininkų injekcija ir pernaša organiniuose lauko tranzistoriuose stilbeno pagrindu /
… properties were investigated using i-CELIV and saturation current measurement methods. The results showed that stilbene and PEPK blends can be used to fabricate functioning OFET devices in which the channel current can be controlled by the gate voltage. In some cases, silver contacts provided …
Page 1 of 5