Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"Saturation flow"”.
-
Calibration of Prevailing Saturation Flow Rate in Milwaukee
… conditions in the City of Milwaukee, the base Saturation Flow Rate at CENTRAL BUSINESS DISTRICT, URBAN and SUBURBAN intersections was found to be higher than the default value suggested by Highway Capacity Manual 1985. Prevailing conditions include traffic characteristics, geometric factors, …
-
Field measurement of ideal saturation flow rate from the highway capacity manual
… (PENNDOT) District 12-0 uses an ideal saturation flow rate of 1800 pcphgpl, which is less than the default value of 1900 pcphgpl provided by HCM. This is to account for the less aggressive characteristics of the local drivers. The purpose of this study is to field measure a sample of …
-
Capacity Analysis of Signalised Intersections: Eeffects of Green Time on Saturation Flow Rate
… is estimated based on the green time ratio and saturation flow rate. The basic model of traffic operations at signalised intersections is based on an assumption that, when a signal changes to green, the flow across the stop line increases rapidly to a maximum queue discharge rate, also termed as …
-
Analysis of saturation flows at single, dual and triple left-turn lanes
… presented in the dissertation, Analysis of Saturation Flows at Single, Dual and Triple Left-Turn Lanes, is to gain a better understanding of the operational characteristics of single and multiple left-turn lanes as compared to adjacent through-lanes on the same intersection approach. The …
-
Enhanced Traffic Signal Operation using Connected Vehicle Data
… intersections; 2) dynamically estimate the saturation flow rate required for optimizing the timings of traffic signals at intersections; and 3) estimate the free flow speed on arterials for the purpose of optimizing offsets between traffic signals. This thesis has resulted in the following …
-
Development of a methodology for measuring delay-based passenger car equivalent for heavy vehicles at signalized intersections
… and are mainly focused on adjusting the ideal saturation flow rate. They do not reflect the total effect of heavy vehicles on delay. The constant PCE value, which is independent of traffic volume and percentage of heavy vehicles, is inappropriate in capacity analysis when delay is considered. …
-
Development of Passenger Car Equivalency Values for Heavy Vehicles for Protected Left-Turn Movements at Signalized Intersections
… the overall impact of heavy vehicles on the saturation flow rate, an important parameter used to calculate capacity, is not fully understood, particularly in exclusive left-turn lanes, where little research has been conducted. This research explores the limitations of the HCM default values, …
-
Modeling Permissive Left-Turn Gap Acceptance Behavior at Signalized Intersections
… then implemented to estimate stochastic opposed saturation flow rates. Finally, the third approach uses a psycho-physical modeling approach. The physical component captures the vehicle constraints on gap acceptance behavior using vehicle dynamics models while the psychological component models …
-
Bluetooth based dynamic critical route volume estimation on signalized arterials
… of intersections such as number of lanes, saturation flow rate and existing timing plans as a basis for the calculation of the dynamic volume for the various movements at each intersection. The study shows that using the Bluetooth based OD matrix to calculate accurate dynamic volumes …
-
Some factors affecting journey-times on urban roads.
… relationships between journey-time and traffic flow during peak periods on two sections of urban road, each about 0.4 miles in length, and (b) of relationships between journey-times and a number of land-use variables over about 50 miles of suburban main roads in off-peak periods. The results of …
-
A Comparison of CORSIM and INTEGRATION for the Modeling of Stationary Bottlenecks
… of the correction factor resulted in observed saturation flow rates that were within 5% of the desired saturation flow rates. The thesis concludes with a comparison of the CORSIM and INTEGRATION models for transient conditions. As a result of the various intricacies and subtleties that are …
-
Investigating the impacts of adverse road-weather conditions on saturation headway
… negative impact of adverse RW conditions. Yet, saturation flow rate (SFR) is a major input for any WRTM that is affected by RW conditions and traffic composition. Few studies investigated the combined effect of adverse RW conditions and heavy vehicle (HV) ratios on the operation of signalized …
-
Signal Control Optimisation for Continuous Flow Intersections with Connected and Autonomous Vehicles Considering Vulnerable Road Users
… of traffic signal control for Continuous Flow Intersections (CFIs), also known as Displaced Left-Turn (DLT) intersections, which are designed to improve traffic flow and safety by reducing conflict points between left-turn and through movements. While previous studies have explored signal …
-
Delay Models at Signalized Intersections Considering Short Right-Turn Lanes and Right Turn on Red
… information as inputs, including traffic volume, saturation flow rate, signal timing plan, and short-lane length. It enhanced the HCM models by being able to handle delay estimation for short right-turn lane and RTOR. By incorporating the RTOR queuing and discharging information, the QAP model …
-
Advanced Signal Control Strategies and Analysis Methodologies for Diverging Diamond Interchanges
… cycle length changes with the variation of saturation flow ratios at this DDI. The simulations illustrated that the performances of the same traffic signal operation varied when it was applied to a variety of traffic volume distributions among routes. Therefore, developing a traffic signal …
-
Evaluation of the Accuracy of the Incremental Queue Accumulation Delay Estimation Method
… further to determine its sensitivity to the saturation flow rate and arrival type.
-
Energy Geo-Storage: A Large- to Medium- and Small-Scale Compressed Air Energy Storage and Geomechanical Analysis
… pore-scale. It is observed that different fluid flow mechanisms may prevail during the drainage and imbibition steps depending on the pore geometry. Sweep efficiency, residual saturation, flow morphology, and pressure gradient are quantitatively examined during the repetitive fluid flows. The …
-
Impact of Autonomous Vehicles and Ride-Sharing on Urban Transportation
… inputs to represent AV behaviour, including saturation flow, gap acceptance, stacking capacity, speed–flow relationships, and generalised cost, and frames the analysis within a static user‑equilibrium assignment to isolate supply‑side effects of automation. The methodology progresses from …
-
Modelling, Simulation and Control of Signalized Intersections under Adverse Weather Conditions
… weather on two key traffic parameters, namely, saturation flow rate and start-up lost time. Field data including traffic video and road weather and surface conditions were collected in the winter of 2015, from which various traffic parameters were extracted from vehicle trajectories. Extensive …
-
Optimizing On-Street Parking Supply with Analytical Models
… traffic signal changes distribution of traffic flow rates. If the vehicle starts to double park when the flow rate is saturation flow rate, the traffic delays will be the highest. A double-parking vehicle also delays parking passenger cars since passenger cars travels on roads while searching …
Page 1 of 2