Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 11 of 11 for “"Scan size"”.
-
Bioactive surfaces for improved coronary stent performance
… (PPy/Sa)coatings were examined using Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). These methods were optimised through an initial investigation into surface topography of a limited number of existing bare metal stents (BMS) and DES. The surface roughness (RMS) …
-
Effect of microfabrication processes on surface roughness parameters and micro/nanoscale friction behavior of silicon surfaces
… KOH produced comparable roughness up to 5 [mu]m scan size, at larger scan sizes TMAH produced rougher surfaces than KOH. The use of IPA additive resulted in enhancement of sub-micron roughness features but a reduction in the long-range roughness of the surfaces to yield smoother surfaces than the …
-
Real-time multimodal sensing in nano/bio environment
As a sensing device in nano-scale, scanning probe microscopy (SPM) is a powerful tool for exploring nano world. Nevertheless two fundamental problems tackle the development and application of SPM based imaging and measurement: slow imaging/measurement speed and inaccuracy of motion or position …
-
Pulsed laser deposition and characterization of indium oxide thin films on native-oxide-covered silicon (111) substrates
… characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) with energy-dispersive spectroscopy (EDS), and atomic force microscopy (AFM). XPS analysis of the 6000-shot film revealed good surface-composition uniformity across three measurement spots, with atomic …
-
The adhesion force study of dairy thermophile Anoxybacillus flavithermus CM with atomic force microscopy : a thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering in Chemical & Nanotechnology at Massey University, Manawatu, New Zealand
… Force-Volume imaging was done on a 32x32 grid scan size (1024 samples) on a scan rate of 0.5 Hz. It was calculated that a single A. flavithermus CM spore has an adhesive force value of 16.8 µN when attached on a stainless steel surface. It has a stronger localize adhesive value of 3.9 nN than a …
-
Generating nano-scale features by electro-machining using an atomic force microscope
… There has been a growing interest in using scanning probe microscopes (SPMs) as tools for nanofabrication. This dissertation's research is an attempt to utilize the principles of electric discharge machining (EDM) and electro chemical machining (ECM) to machine at nanoscale using the atomic …
-
Μελέτη των οπτικών χαρακτηριστικών σύγχρονων σκευασμάτων σύνθετων ρητινών
… was set in VSI function, with an area scan size of 100μm. Gloss was measured with a small area glossmeter with a square measurement area of 2x2mm and 60o geometry. The roughness, color and gloss results were subjected to statistical analysis using SPSS software (SPSS Inc, IBM Co, IL, …
-
Algorithmic approaches to high speed atomic force microscopy
… comes with tradeoffs that include a small scan size, limited imaging modes and very high cost. As a result, most AFM users still rely on standard commercial AFMs. The work in this thesis develops algorithmic approaches that can be implemented on existing instruments, from standard …
-
Small-Scale Characterization Of Additive Manufactured Ti-6al-4v Alloy Through Instrumented Indentation
… AM process to print Ti-6Al-4V alloy in different scan direction and scan size. Instrumented indentation testing technique, a robust, reliable, convenient, and non-destructive characterization method to study small-scale mechanical properties in metals and alloys at ambient and elevated …
-
Investigation of an Intraoral Scanner and Analysis Workflows for Measuring Surface Loss on Planar and Freeform Surfaces <i>in vitro</i>
… and measurement thresholds of an intraoral scanner, IOS-TD (True Definition, Midmark Corp., Ohio, USA) for measuring surface change on planar and freeform surfaces such as seen in polished and natural enamel.<br/><br/><b>Methods</b> – The IOS-TD’s accuracy for measuring a groove on polished …
-
Nanolithography on thin films using heated atomic force microscope cantilevers
Nanotechnology is expected to play a major role in many technology areas including electronics, materials, and defense. One of the most popular tools for nanoscale surface analysis is the atomic force microscope (AFM). AFM can be used for surface manipulation along with surface imaging. The primary …