Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 15 of 15 for “"Scan velocity"”.

  1. High Speed Atomic Force Microscopy Techniques for the Efficient Study of Nanotribology

    … speed AFM. The first method utilizes high line-scanning rates coupled with sinusoidal scanning along the AFM fast scan axis, enabling rapid friction measurements as a function of velocity up to 20 mm/sec. The second method rapidly acquires friction versus force curves through disabling the …

    uconn-diss Repository record for High Speed Atomic Force Microscopy Techniques for the Efficient Study of Nanotribology (opens in a new tab)

  2. Microstructural Heterogeneity in Laser Powder Bed Fusion

    … its evolution as a function of laser power and scan velocity. Complementary Kinetic Monte Carlo (KMC) simulations are carried out to model the resulting microstructure and compare with experimental observations. Both experiments and simulations reveal that increasing laser power and reducing …

    cornell Repository record for Microstructural Heterogeneity in Laser Powder Bed Fusion (opens in a new tab)

  3. WEAR CHARACTERISATION OF MAGNETIC HARD DISK COATINGS USING ATOMIC FORCE MICROSCOPE

    … wear marks with different loads under a fixed scan cycle or with different scan cycles under a fixed load. These give measurements for wear depth vs. load and wear depth vs. scan cycle. The images of the wear marks are then obtained by the same AFM using the normal tip. Nano/micro-wear test, …

    nus Repository record for WEAR CHARACTERISATION OF MAGNETIC HARD DISK COATINGS USING ATOMIC FORCE MICROSCOPE (opens in a new tab) Download file for WEAR CHARACTERISATION OF MAGNETIC HARD DISK COATINGS USING ATOMIC FORCE MICROSCOPE (opens in a new tab)

  4. Mechatronic Design and Feedback Control for Quality-assured Laser Powder Bed Fusion Additive Manufacturing

    … various process parameters (e.g., heater power, scan velocity) to provide the opportunity for model-based controls. Leveraging the established mechatronic design, we investigated control algorithms and data interpretation frameworks for attenuating mechanical vibrations, thermal transfer …

    washington Repository record for Mechatronic Design and Feedback Control for Quality-assured Laser Powder Bed Fusion Additive Manufacturing (opens in a new tab)

  5. High speed multiple-pass cavity scanning optical delay line for real-time high resolution optical coherence tomography (OCT)

    … of four mirrors, one lens and one resonant scanner. In this proposed delay line, the path delay is obtained by scanning a tilting mirror and magnified by the multiple-pass optical cavity. Thus, for a small scanning angle, a large path delay can be obtained. This delay line is especially …

    concordia Download PDF for High speed multiple-pass cavity scanning optical delay line for real-time high resolution optical coherence tomography (OCT) (opens in a new tab)

  6. Exploring the Performance of Low-Cost Part Scanning in Wire Arc Additive Manufacturing

    … time and cost. To address these challenges, 3D scanning can be employed as an in-situ monitoring technique to detect distortion as it develops by gathering accurate scans in-between layers. Surface measurements using 3D scanning are desired with uncertainties below 1 mm. Existing scanning …

    ut-knoxville Repository record for Exploring the Performance of Low-Cost Part Scanning in Wire Arc Additive Manufacturing (opens in a new tab)

  7. Chemical scanning probe lithography and molecular construction

    … interesting. In this work, spatially controlled scanning probe directed organometallic coupling, patterned functional protein immobilisation and highly localised reversible redox reactions on SAMs were investigated.</p> <p>Catalytically active palladium nanoparticles were mounted on a scanning …

    oxford Restricted access

  8. Algorithmic techniques for manual-scanning and multi-sensory representation of optical coherence tomography data

    … OCT is hindered by the lack of suitable sample scanning mechanisms and the difficulty in real-time interpretation of OCT data. Screening or diagnostic procedures typically require high resolution imaging over a large field-of-view. The current scanning mechanisms, which are predominantly based …

    uiuc Repository record for Algorithmic techniques for manual-scanning and multi-sensory representation of optical coherence tomography data (opens in a new tab)

  9. The development and processing of nickel titanium shape memory alloys containing palladium using selective laser melting

    … was investigated. The laser power, laser scanning velocity and laser scan spacing were independently varied to alter the energy density of the laser and in turn, modify the dimensions of the melt pool. It has been found that the SLM process parameters can be manipulated to fully diffuse Pd …

    birmingham Download PDF for The development and processing of nickel titanium shape memory alloys containing palladium using selective laser melting (opens in a new tab)

  10. Solidification in laser powder deposition of Ti-Nb alloys

    … parameters, including laser power, laser scan velocity, laser beam diameter and powder feed rate. The results of the thermal model for the optimized set of parameters matched with the thermocouple temperature measurements with only ~5% deviation. The thermal model was able to predict …

    waterloo Repository record for Solidification in laser powder deposition of Ti-Nb alloys (opens in a new tab)

  11. Nanoscale Investigation of Adhesion, Friction, and Wear in Chemically Heterogeneous Responsive Polymer Brushes

    … of top of the binary brush surface, and tip scan velocity. Nanowear studies were carried out with AFM using sharp silicon nitride tip while macrowear studies were carried out using nanoindenter. Nanowear on the surfaces was affected by molecular entanglements, adhesion and friction forces as …

    qucosa-diss

  12. Machine Learning-Driven Optimization of Laser Powder Bed Fusion: From Powder Characterization to Process Parameters Tailoring for Ti6Al4V Powders

    … process parameters, including laser power, scan velocity, hatch distance, and energy density. These parameters are tailored based on the size range of the Ti64 powder, melt pool/light intensity signatures, and the desired properties of the final part, such as density, hardness, and surface …

    waterloo Repository record for Machine Learning-Driven Optimization of Laser Powder Bed Fusion: From Powder Characterization to Process Parameters Tailoring for Ti6Al4V Powders (opens in a new tab)

  13. Controlled orientation and periodicity of surface rippling on compliant and brittle amorphous materials induced by scanning probe lithography

    … of surface rippling structures induced by tip scanning processes on compliant and brittle materials. Periodic surface structures were generated on polymeric and vitreous materials and with different length scales. Two aspects were focused on: the controlling of orientation and periodicity of …

    qucosa-diss

  14. Evaluation of Doppler Lidar Scan Strategies for Wind Measurements in the Atmospheric Boundary Layer

    The simultaneous use of more than two scanning Doppler Lidar (DL) systems offers unique possibilities for the ground-based remote sensing of the three-dimensional wind field in the atmospheric boundary layer. However, experiments exploring such applications are scarce due to their high complexity …

    qucosa-diss

  15. Nanolithography on thin films using heated atomic force microscope cantilevers

    Nanotechnology is expected to play a major role in many technology areas including electronics, materials, and defense. One of the most popular tools for nanoscale surface analysis is the atomic force microscope (AFM). AFM can be used for surface manipulation along with surface imaging. The primary …

    gatech Repository record for Nanolithography on thin films using heated atomic force microscope cantilevers (opens in a new tab)