Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 10 of 10 for “"Scanning Auger Microscopy"”.
-
Towards understanding material characteristics through the additive manufacturing arc
… powders are investigated using methods such as scanning auger microscopy, scanning electron microscopy, various flow measurement methods, differential scanning calorimetry, and electron backscatter diffraction. The properties of LENSTM depositions using these powders are then investigated using …
-
Environmental Degradation of High Tc Superconductors
… susceptibility, ii) Tc measurements, iii) scanning Auger microscopy, iv) x-ray diffraction, v) scanning electron microscopy, vi) energy dispersive x-ray spectroscopy, and vii) optical microscopy. Each one of these techniques provided information on certain aspects of the corrosion phenomena …
-
Solidification of Hot-Dip Galvanized Coatings
… microstructures were characterized via optical microscopy and Scanning Electron Microscopy (SEM). In addition, the zinc grain orientation distribution was investigated using Electron Backscattered Diffraction (EBSD). Furthermore, Scanning Auger Microscopy (SAM) was carried out on the coating …
-
High temperature interactions of alkali vapors with solids during coal combustion and gasification.
… before and after alkali adsorption using scanning Auger microscopy, X-ray diffraction analysis, mercury porosimetry and atomic emission spectrophotometry. The results show that the process is not a simple physical condensation, but a complex combination of several diffusion steps and …
-
Surface science studies of conversion coatings on 2024-T3 aluminum alloy
… permanganating were characterized especially by scanning Auger microscopy (SAM), X-ray photoelectron spectroscopy, and scanning electron microscopy . The objective was to learn about growth (nm level) as a function of time for different coating baths, as well as a function of lateral position …
-
Studies of some technologically important interfaces
… X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) were used to assess the effects of pre-treatment on the direct Al-O-Si covalent bonding and the strength of adhesive bonding. Applying a sulphuric-chromic (FPL--Forest Products Laboratory) pre-treatment to native …
-
Organosilane adsorption on light metal alloys
… X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM)). One project involved comparing the adsorption of bis-1,2-(triethoxysilyl)ethane (BTSE) on high-purity Al, and on anodized 7075-Al alloy, for different pre-treatments involving chemical and heating procedures, and …
-
Surface science studies of organosilane and zinc phosphate coatings on 2024-T3 aluminum alloy
… by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) , energy dispersive X-ray (EDX ) spectroscopy and scanning Auger microscopy (SAM). Some studies of corrosion protection were also made using electrochemical polarization measurements, especially for comparing …
-
Laser Induced Surface Modification of Aluminium Alloys
… the thermal conditions during laser processing. Scanning Auger microscopy, transmission electron microscopy and x-ray diffraction techniques indicated a reaction between oxide particles and aluminum-forming FeAl intermetallic compounds, Al<sub>2</sub>O<sub>3</sub>, and various intermediate …
-
Design and Simulation of a Miniature Cylindrical Mirror Auger Electron Energy Analyzer with Secondary Electron Noise Suppression
… Cylindrical Mirror Analyzer, (CMA), and Auger Electron Spectrometer, (AES). The CMA includes an integrated coaxial thermionic electron source. Electron optics simulations were performed using the Finite Element Method, (FEM), software COMSOL. To address the large Secondary Electron, (SE), …