Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 19 of 19 for “"Scanning Kelvin Probe Microscopy"”.
-
Investigation of Surface States and Device Surface Charging in Nitride Materials Using Scanning Kelvin Probe Microscopy
In this work Scanning Kelvin Probe Microscopy (SKPM) was used to characterize surface states and device surface charging in nitride materials. Samples grown by Molecular Beam Epitaxy (MBE), Metal Organic Chemical Vapor Deposition (MOCVD) and Hydride Vapor Phase Epitaxy (HVPE) typically show a high …
-
A PROOF-OF-CONCEPT EXPERIMENT TO INVESTIGATE FAST CHARGING TRANSIENTS BY SCANNING KELVIN PROBE MICROSCOPY AND 2) STUDIES ON BRIDGED RUTHENIUM COMPLEXES
Scanning kelvin probe microscopy has been to used to understand the operation of, and optimize the performance of both organic and inorganic photovolataic materials on the 10’s of nm scale. Most studies have only examined the spatial distribution of the electronic phenomena – including potential, …
-
Nano Thermal and Contact Potential Analysis with Heated Probe Tips
This work describes two closed-loop atomic force microscopy methods that utilize the heated silicon probe to interrogate surfaces. The first method identifies the softening temperatures of a selected polymer and organic substrate as a function of contact force and surface hardness. Motivation …
-
2D medžiagų nanoelektrinių savybių tyrimas /
This work describes the use of scanning probe microscopy techniques to investigate the properties of 2D materials on 3D metal contacts. The main focus is drawn to the van der Waals gap of the aforementioned structures in order to investigate them under mechanical and thermal stress in nanoscale …
-
Local Charging Behavior on GaN Surfaces
… studied by measuring the surface potential with scanning Kelvin probe microscopy (SKPM). The charging and discharging behavior of the surface appears to be strongly influenced by surface preparation and the presence of a surface oxide layer. If a substantial oxide layer exists, then both positive …
-
Exploring Charge Transport Mechanisms and Conduction Limits in Rubrene Single Crystals
… electronic and structural disorder using scanning Kelvin probe microscopy. Chapter 7 focuses on the use of dipolar liquid to accumulate charge at rubrene crystal surfaces while maintaining the high mobility. Chapter 8 explores charge transport phenomena near the maximum conductivity of …
-
Surface Electrostatic Properties of Organic Semiconductors
… organic semiconductors. To this end, a number of scanning probe microscopy (SPM) techniques are employed to examine thin films and single crystals of prototypical organic semiconductors. In particular, strong variations of interfacial polarization at the organic/insulator interfaces are quantified …
-
Preparation and characterization of plasma-fluorinated epitaxial graphene
… epitaxial graphene were performed using scanning Kelvin probe microscopy (SKPM). The results of SKPM characterization of plasma-fluorinated epitaxial graphene demonstrated that the increase in the work function of epitaxial graphene after plasma-treatment is independent of its surface …
-
Microscopic Studies Of The Fate Of Charges In Organic Semiconductors: Scanning Kelvin Probe Measurements Of Charge Trapping, Transport, And Electric Fields In P- And N-Type Devices
… measurements. In this thesis, we present scanning-probe microscope studies of organic semiconductor devices in an effort to connect local properties with local device behavior. First, we study the chemistry of charge trapping in pentacene transistors. Working devices are doped with known …
-
Probing Underlying Processes in Organic Photovoltaics with Atomic Force Microscopies
… current, fill factor and lifetime. Atomic Force Microscopy is one unique tool to study the optoelectronic processes in organic photovoltaics (OPV), for it allows one to study the local morphology and electronic properties, e.g. photocurrent, carrier mobilities, charging rate, at the same time. I …
-
Investigation of Surface Properties for Ga- and N-polar GaN using Scanning Probe Microscopy Techniques
… device performance. In this work, atomic force microscopy (AFM) and related techniques have been used to characterize three unique sets of n-type GaN samples. The sample sets comprised freestanding bulk GaN with Ga polar and N polar surfaces, epitaxial GaN films with laterally patterned Ga- and …
-
Formation of screen-printed contacts on multicrystalline silicon (mc-Si) solar cells
… of phosphorous occurs during Si-Ag interaction. Scanning Kelvin Probe Microscopy profiles have been studied to measure the surface potential of the metal semiconductor region. Current Voltage characteristics of the fired cells are presented. An improved technique to cross-section large lengths of …
-
Understanding efficiency improvement in organic photovoltaics with molecular modifiers
… within operational solar cells, cross-sectional scanning Kelvin probe microscopy (X-SKPM), is tested in ambient and inert conditions. X-SKPM of organic photovoltaics in air reveals oxygen p-doping of the bulk heterojunction, as well as sensitivity to surface contamination of oxide interlayers, …
-
Cellulose Nanocrystals: Size Characterization and Controlled Deposition by Inkjet Printing
… and thickness distributions by atomic force microscopy (AFM) and dynamic light scattering. Aqueous CNC suspensions were characterized in terms of shear viscosity with a rheometer. Glass substrates were cleaned with a detergent solution, aqua regia, or a solvent mixture, and characterized in …
-
Non-destructive Electrical Characterization of Controlled Waspaloy Microstructures
… as Ultra Small Angle X-ray Scattering (USAXS), Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD) to gain a complete understanding of the microstructural transformations and the associated mechanisms. Three different sets of controlled microstructures were produced in this research. …
-
Interrogating Electronic and Ionic Carrier Motion in Halide Perovskites with Scanning Probe Microscopy
… contributor to the lowered stability. We used scanning probe microscopy (SPM) to further our understanding of ionic motion in lead halide perovskites. We first used scanning kelvin probe microscopy (SKPM) to investigate how ionic motion varies with dimensionality in 2D perovskite layers …
-
CHARGE TRAPPING IN POLYMER DIELECTRICS AND POTENTIALS AT ORGANIC DONOR-ACCEPTOR JUNCTIONS—THE ROLE OF INTERFACE AND BULK CONTRIBUTIONS
Organic electronics have attracted increasing interest during the past decade due to their potential applications in transparent, large-area, printable, and stretchable devices. Solution based material deposition considerably reduces processing costs, and allows the use of non-standard substrates …
-
Nanoscale electrical characterization of semiconductor and semiconductor-oxide junctions by scanning probe microscopy
… local mechanisms. This dissertation applies scanning probe microscopy---atomic force microscopy together with its electrical extensions, scanning Kelvin probe force microscopy (SKPM), scanning capacitance microscopy (SCM), and conductive atomic force microscopy (CAFM)---in combination with …
-
NANOSTRUCTURED SEMICONDUCTOR FILMS: SYNTHESIS, SURFACE FUNCTIONALIZATION AND INNOVATIVE APPLICATIONS
… temperatures (BET), high resolution transmission microscopy (HRTEM), Fourier transform infrared (FTIR) spectroscopy, and zeta potential determinations, providing an insight into the composite structure and into the specificity of the Bi2O3-TiO2 composites with respect to traditional sol-gel TiO2 …