Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 3484 for “"Scanning electron microscopy (SEM)"”.

  1. In-situ scanning electron microscopy (sem) observations of the tensile and tensile-creep deformation of Titanium-8Aluminum-1mo-1v (wt.%) alloy

    … (RT) to 650<super>O</super>C inside a scanning electron microscope (SEM), which allowed for the observation of the surface deformation evolution. Electron Back Scattered Diffraction (EBSD) was used to identify the distribution of the active deformation systems.In this thesis efforts …

    msu Repository record for In-situ scanning electron microscopy (sem) observations of the tensile and tensile-creep deformation of Titanium-8Aluminum-1mo-1v (wt.%) alloy (opens in a new tab)

  2. Rheological studies and percolation modeling of microstructure development of fresh cement paste

    This study combines rheology, scanning electron microscopy (SEM) and cement hydration studies as well as theoretical modeling to gain fundamental understanding about the microstructure, its control of flow behavior, its development due to hydration, and setting.

    uiuc Repository record for Rheological studies and percolation modeling of microstructure development of fresh cement paste (opens in a new tab)

  3. O efeito do tratamento da atapulgita no desenvolvimento de compósito com o polietileno reciclado

    … fluorescence (XRF), particle size analysis, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and determining the area specific surface (BET). The composites were characterized by thermogravimetry (TG), differential scanning calorimetry (DSC), Xray diffraction (XRD), …

    brazil-ufrn Repository record for O efeito do tratamento da atapulgita no desenvolvimento de compósito com o polietileno reciclado (opens in a new tab)

  4. Filament-Assisted Chemical Vapor Deposition of Diamond and Its Mechanism

    … spectroscopy, X-ray diffraction (XRD), Auger electron spectroscopy (AES), and scanning electron microscopy (SEM).

    uiuc Repository record for Filament-Assisted Chemical Vapor Deposition of Diamond and Its Mechanism (opens in a new tab)

  5. Surfaces of weathered minerals associated with soil drainage: A quantitative microscopic evaluation

    The use of scanning electron microscopy (SEM) has allowed the viewing of the surfaces of silt and sand sized soil minerals. These surfaces are a record of the weathering history of the grain in a particular pedochemical environment. The objective of this dissertation was to develop SEM techniques …

    uiuc Repository record for Surfaces of weathered minerals associated with soil drainage: A quantitative microscopic evaluation (opens in a new tab)

  6. Algorithms and Architectures for Some Problems in Multibeam Electron Beam Lithography and SEM Metrology

    … need for computation power is driving the semiconductor industry towards innovative solutions to reduce integrated circuit sizes. Multibeam mask writers and accurate scanning electron microscopy (SEM) metrology are two such innovative solutions. Multibeam mask writers enable next-generation …

    tamu Repository record for Algorithms and Architectures for Some Problems in Multibeam Electron Beam Lithography and SEM Metrology (opens in a new tab)

  7. Evaluation of the Biocompatibility and Micromechanical Properties of Experimental Dental Adhesives

    … properties, and surface micro-hardness. Scanning electron microscopy (SEM) was used for interfacial characterization. Human extracted molars were used as a substrate for bonding adhesives for the micro-tensile bond strength (MTBS) and scanning electron microscopy (SEM) studies. Twenty …

    buff-state Repository record for Evaluation of the Biocompatibility and Micromechanical Properties of Experimental Dental Adhesives (opens in a new tab)

  8. Field stabilization of Ponca City shale /

    … was studied using X-ray diffraction (XRD) and scanning electron microscopy (SEM) in conjunction with energy dispersive spectroscopy (EDS). The non basal (hkl) reflections in stabilized oriented specimens suggest that the clay particles in the stabilized shale acquired high resistance to …

    oklahoma-thes Repository record for Field stabilization of Ponca City shale / (opens in a new tab)

  9. The Role of Impact Driven Chemistry on the Lithosphere of Mars

    … analysed using Raman Spectroscopy and Scanning Electron Microscopy (SEM) to characterise the behaviour of these minerals during planetary impacts.

    kent Download PDF for The Role of Impact Driven Chemistry on the Lithosphere of Mars (opens in a new tab)

  10. 1, 2, 3-Triazole Based Core Structure in the Application of Corrosion Inhibition

    … between the triazole compounds and the electron flow between electrodes. These interactions can be tested using Electrical Impedance Spectroscopy (EIS). The steel plates were submerged in the HCl mixed with different concentrations of the inhibitor in order to view differences in the …

    gsu Repository record for 1, 2, 3-Triazole Based Core Structure in the Application of Corrosion Inhibition (opens in a new tab)

  11. Estudo de um compósito Nb-15%pCu obtidos por moagem de alta energia e sinterizados por fase líquida

    … The results obtained by MAE were analyzed by scanning electron microscopy (SEM), according to the parameters of time and grinding speed. The samples were compacted under pressure of 200 MPa, were then sintered in liquid phase in a vacuum furnace at temperatures of 1100 ° C / 60 min and 1200 ° …

    brazil-ufrn Repository record for Estudo de um compósito Nb-15%pCu obtidos por moagem de alta energia e sinterizados por fase líquida (opens in a new tab)

  12. Assessment of the bond strength between resin cement and lithium disilicate based glass ceramics with different chemical composition and surface treatments

    … Celtra Duo, n!ce) were analyzed using X-ray photoelectron spectroscopy (XPS). In addition, scanning electron microscopy (SEM) was used to analyze the microstructure of LDGC. Part II: The effect of different surface treatments on the micromorphology and the roughness of four CAD/CAM lithium …

    manitoba Repository record for Assessment of the bond strength between resin cement and lithium disilicate based glass ceramics with different chemical composition and surface treatments (opens in a new tab)

  13. Produção de fitas cerâmicas via tape casting para aplicação biomédica

    … (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The slips were identified through the rheological test and then the ceramic tape was tape casting. These were characterized through X-ray diffraction analysis (XRD), thermogravimetric analysis (TGA), differential …

    brazil-ufrn Repository record for Produção de fitas cerâmicas via tape casting para aplicação biomédica (opens in a new tab)

  14. Estudo do efeito de intempéries regionais na deterioração de pás eólicas

    … tests, flexural tests, mass loss, roughness and scanning electron microscopy (SEM) were performed on all specimens after the tests. The computational simulation allowed to visualize the aerodynamic behavior inside the tunnel and to determine the most stable place for fixation of the specimen. The …

    brazil-ufrn Repository record for Estudo do efeito de intempéries regionais na deterioração de pás eólicas (opens in a new tab)

  15. Functionally Magnetic Gradient Copper-Nickel Material Fabricated via Directed Energy Deposition

    … mechanical testing include microscopic imaging, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and hardness test. In addition, compressive strength test was performed to analyze the interface bonding behaviors.

    wvu Repository record for Functionally Magnetic Gradient Copper-Nickel Material Fabricated via Directed Energy Deposition (opens in a new tab)

  16. Processing-Structure-Property Relationships of Reactive Spark Plasma Sintered Boron Carbide-Titanium Diboride Composites

    … and composition are characterized by scanning electron microscopy (SEM), x-ray microscopy (XRM) and x-ray diffraction (XRD). Starting powder size distribution effects on microstructure are present and effect the mechanical properties. Reactive spark plasma sintering introduces boron …

    unt Repository record for Processing-Structure-Property Relationships of Reactive Spark Plasma Sintered Boron Carbide-Titanium Diboride Composites (opens in a new tab)

  17. Passivation effects of surface iodine layer on tantalum for the electroless copper deposition.

    … practical importance in catalysis and microelectronics. In this work, the passivation effect of a surface iodine layer on air-exposed Ta for the copper electroless deposition was investigated by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Although the …

    unt Repository record for Passivation effects of surface iodine layer on tantalum for the electroless copper deposition. (opens in a new tab)

  18. Development of Ti-Si-N and Ta-Si-N as diffusion barriers

    … X-ray diffractometry (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), auger electron spectroscopy (AES) and annealing in a controlled ambient atmosphere"--Abstract, page iv.

    must-thes Repository record for Development of Ti-Si-N and Ta-Si-N as diffusion barriers (opens in a new tab)

  19. Sample preparation technique development for atom probe tomography of nanoparticles

    … The main characterizations were performed using scanning electron microscopy (SEM) and Focused Ion Beam (FIB). Electrophoresis and dispersions were trialed for parameter optimizations. The decrease in electrophoretic deposition time and voltage decreased the density of NPs and agglomerates …

    colo-mines Repository record for Sample preparation technique development for atom probe tomography of nanoparticles (opens in a new tab)

  20. Synthesis and characterization of metal chalcogenide and metal oxide nanostructures

    … and energy conversion applications due to their semiconducting properties. Nanostructures made from such materials, therefore, have potential to work as building blocks for nanoelectronics. Various synthetic methods have been developed for the preparation of different nanostructures. In this …

    colostate Repository record for Synthesis and characterization of metal chalcogenide and metal oxide nanostructures (opens in a new tab)

Page 1 of 175