Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 369 for “"Scanning probe microscopy"”.

  1. Surface studies with scanning probe microscopy.

    Using scanning probe microscopy, several studies were carried out to characterize surface topographies and properties. First, utilizing scanning tunneling microscopy (STM), we characterized fullerenes deposited onto gold foils and highly oriented gold films. On gold foils, we found that C₆₀ packed …

    arizona-thes Repository record for Surface studies with scanning probe microscopy. (opens in a new tab)

  2. Scanning probe microscopy of protein nanowires

    … of these protein nanowires using the toolbox of scanning probe microscopy, specifically scanning tunneling microscopy and point tunneling spectroscopy. These measurements were performed at 77 K and at room temperature. The measured data are compared to theoretical calculations.Density of states …

    msu Repository record for Scanning probe microscopy of protein nanowires (opens in a new tab)

  3. Scanning probe microscopy investigation of bilayered manganites

    … K and 20 K by using a home-built low temperature scanning tunneling microscope (STM) and the evolution of the ferromagnetic domains with temperature and magnetic field in the x = 0.32 compound from 30 K to 110 K by using a home-built low temperature magnetic force microscope (MFM). STM topographic …

    texas Repository record for Scanning probe microscopy investigation of bilayered manganites (opens in a new tab)

  4. Collective electronic effects in scanning probe microscopy

    … are calculated for a metal coated dielectric probe above a dielectric half space with and without metal coating. Employing prolate spheroidal coordinate system this configuration was modeled as confocal single-sheeted hyperboloids of revolution superimposed on planar domains. The involved …

    utk-theses Repository record for Collective electronic effects in scanning probe microscopy (opens in a new tab)

  5. Scanning Probe Microscopy: Applications for Genomic Research

    … of the 1980’s coincided with the development of scanning probe microscopy (SPM). SPM was a good fit as one of the new technologies that might be implemented to sequence or map DNA and perhaps make a major contribution toward the goal of sequencing the entire human genome. Although the scanning …

    utk-theses Repository record for Scanning Probe Microscopy: Applications for Genomic Research (opens in a new tab)

  6. Scanning probe microscopy of poly-atomic molecules

    This thesis presents studies on the adsorption of chlorobenzene using STS, non-local desorption of chlorobenzene and the atomic manipulation of the PCB molecule using STM. The atomic manipulation of the mucin molecule on HOPG surfaces under different conditions has also been investigated. …

    birmingham Download PDF for Scanning probe microscopy of poly-atomic molecules (opens in a new tab)

  7. Optically Induced Forces In Scanning Probe Microscopy

    … interfaces. This is accomplished using a scanning probe microscope (SPM), which has the advantage of already having a sensitive force detector integrated into the system. The two microscopies we focus on here are atomic force microscopy (AFM) and nearfield scanning optical microscopy …

    ucf Repository record for Optically Induced Forces In Scanning Probe Microscopy (opens in a new tab)

  8. Scanning probe microscopy studies of nanoscale ferroelectrics

    Scanning Probe Microscopy (SPM) has emerged as an indispensable tool to probe and characterise materials, correlate local responses spatially, and manipulate and write features directly. Concurrently, nanoscale ferroelectrics have seen a surge in interest in the past decade for photovoltaic, …

    unsw Repository record for Scanning probe microscopy studies of nanoscale ferroelectrics (opens in a new tab)

  9. Scanning probe microscopy study of adsorbed conjugated molecules

    … such SAM in future molecular electronic devices. Scanning Tunneling Microscopy (STM) and Atomic Force Microscopy (AFM) are used in a controlled liquid environment for the characterization. The set-up and method to measure local conductivity of surfaces using Conducting AFM is also described.SAMs …

    nus Repository record for Scanning probe microscopy study of adsorbed conjugated molecules (opens in a new tab) Download file for Scanning probe microscopy study of adsorbed conjugated molecules (opens in a new tab)

  10. Microfabrication of silicon tips for scanning probe microscopy

    … the microfabrication of silicon tips for Scanning Probe Microscopy. First, a microfabrication process was developed to produce silicon tips over 100 um height with a sharp apex of ~10–20 nm. To prevent inadvertent contact between the substrate bearing the tip and the sample being probed, …

    birmingham Repository record for Microfabrication of silicon tips for scanning probe microscopy (opens in a new tab) Download PDF for Microfabrication of silicon tips for scanning probe microscopy (opens in a new tab)

  11. Scanning Probe Microscopy of Graphene and Carbon Nanotubes

    This dissertation presents research on scanning probe microscopy and spectroscopy of graphene and carbon nanotubes. In total three experiments will be discussed. The first experiment uses a scanning tunneling microscope (STM) to study the topographic and spectroscopic properties of graphene on …

    arizona-thes Repository record for Scanning Probe Microscopy of Graphene and Carbon Nanotubes (opens in a new tab)

  12. Scanning Probe Microscopy of Biomaterials and Nanoscale Biomechanics

    … and using a nanoneedle attached to the AFM probe as the sensing element in liquid. It was shown that this method in liquid maintained the harmonic dynamic characteristics of the cantilever similar to that in air and had an intrinsic high quality factor. The performance of the new method is …

    uiuc Repository record for Scanning Probe Microscopy of Biomaterials and Nanoscale Biomechanics (opens in a new tab)

  13. Scanning Probe Microscopy of Biomaterials and Nanoscale Biomechanics

    … performance of bone. Using piezoresposne force microscopy (PFM), the electromechanical properties of a collagen fibril was probed and it was revealed that a single collagen fibril behaves predominantly as a shear piezoelectric material, and has unipolar axial polarization throughout its entire …

    uiuc Repository record for Scanning Probe Microscopy of Biomaterials and Nanoscale Biomechanics (opens in a new tab)

  14. Scanning Probe Microscopy Studies of Petroleum Chemistry: Substrate-Dependent Catalytic Properties of MoS2 and Automating Scanning Probe Microscopy with Machine Learning

    … that emit fewer harmful gases when combusting. Scanning probe microscopy techniques have become a powerful tool to look into the chemical structures found in petroleum products, to understand catalytic reactions in refining processes, and to find new non-combustible uses for these products. In …

    unh-thes Repository record for Scanning Probe Microscopy Studies of Petroleum Chemistry: Substrate-Dependent Catalytic Properties of MoS2 and Automating Scanning Probe Microscopy with Machine Learning (opens in a new tab)

  15. Scanning probe microscopy study of thin film solar cells

    … thin film solar cells have been studied by using scanning probe microscopy based techniques. The scanning spreading resistance microscopy (SSRM) has been developed on the cross-section of CdTe solar cells to study the resistance and carrier concentration distribution in different layers of the …

    texas Repository record for Scanning probe microscopy study of thin film solar cells (opens in a new tab)

  16. Data-driven Scanning Probe Microscopy for Advanced Functional Materials

    … and various coupling at local length scales. Scanning Probe Microscopy (SPM) is a powerful tool to study a wide variety of physical properties at the nanoscale which can be directly traced to their microstructures and further linked to the performance on the device level. In this dissertation, …

    washington Repository record for Data-driven Scanning Probe Microscopy for Advanced Functional Materials (opens in a new tab)

  17. Study of Two Dimensional Materials by Scanning Probe Microscopy

    … temperature and low temperature ultrahigh vacuum scanning probe microscopy (scanning tunneling microscopy, scanning tunneling spectroscopy, atomic force microscopy) is used as the primary characterization method. The main findings in this thesis are: (a) observations of the atomic lattice and …

    ottawa-retro Repository record for Study of Two Dimensional Materials by Scanning Probe Microscopy (opens in a new tab)

  18. ELECTROMECHANICS OF BIOLOGICAL SYSTEMS STUDIED BY SCANNING PROBE MICROSCOPY

    … of such hierarchical electromechanical coupling, scanning probe microscopy-based techniques are considered. Piezoresponse force microscopy (PFM) becomes the specific focus of this work, and the nascent development of PFM is reviewed through its first applications in liquid environments and with …

    clemson Repository record for ELECTROMECHANICS OF BIOLOGICAL SYSTEMS STUDIED BY SCANNING PROBE MICROSCOPY (opens in a new tab)

Page 1 of 19