Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 50 for “"Scrape-off layer"”.

  1. Reduced simulations of scrape-off-layer turbulence

    … looks at models of plasma transport in the Scrape-Off Layer (SOL) of magnetic fusion devices, which sets critical heat loads on the components in the divertor. The cross-field plasma transport in the SOL is due to filamentary turbulence, carrying particles and energy radially within the SOL. …

    whiterose Download PDF for Reduced simulations of scrape-off-layer turbulence (opens in a new tab)

  2. 3D Simulations of Scrape-Off Layer Filaments

    In the Scrape-Off Layer (SOL) of magnetic confinement devices, cross-field transport of particles is dominated by the convection of filamentary plasma structures via self-generated E×B velocity fields. This thesis investigates the dynamics of such filaments using three dimensional simulations to …

    whiterose Download PDF for 3D Simulations of Scrape-Off Layer Filaments (opens in a new tab)

  3. Convective motions in the scrape-off layer of magnetically confined plasmas

    … fusion. At the plasma edge, in the so-called scrape-off layer (SOL), turbulent motions are responsible for transporting plasma from the core confinement region towards the material surfaces. It has been universally observed that SOL turbulence is characterised by large, intermittent …

    whiterose Download PDF for Convective motions in the scrape-off layer of magnetically confined plasmas (opens in a new tab)

  4. Power and momentum removal in the Scrape-Off Layer of ASDEX Upgrade

    … target temperatures, the momentum losses in the scrape-off layer (SOL) near the separatrix are up to two orders of magnitude stronger compared to the momentum losses in the far SOL in flux tubes with the same target temperature. In L-mode-like and H-mode-like SOLPS 5.0 simulations, the momentum …

    aalto Repository record for Power and momentum removal in the Scrape-Off Layer of ASDEX Upgrade (opens in a new tab)

  5. Investigations of radial transport in the scrape-off layer of JET-ILW

    … the open magnetic field line boundary plasma (or Scrape-Off Layer (SOL)) of tokamaks, the stronger than diffusive transport of particles is to a large extent due to the convection of coherent, filamentary like structures when operating in divertor configuration. Reliable predictions of this …

    whiterose Download PDF for Investigations of radial transport in the scrape-off layer of JET-ILW (opens in a new tab)

  6. The relationship between scrape-off layer filaments and density profiles in ASDEX Upgrade

    … the turbulence statistics of the ASDEX Upgrade scrape-off layer (SOL), and the filaments that populate it, for different L and H-mode discharges using the gas puff imaging (GPI) diagnostic. A synthetic GPI diagnostic is constructed and applied to a toy model to account for the smearing of …

    whiterose Download PDF for The relationship between scrape-off layer filaments and density profiles in ASDEX Upgrade (opens in a new tab)

  7. Measuring the Inboard Side Scrape-off Layer of DIII-D Plasmas using Swing-probes

    The scrape-off layer (SOL) plasma of a tokamak often has a complicated spatial dependence. The temperatures, densities and flow speeds can vary significantly on the same magnetic flux tube at different poloidal locations. To fully understand the plasma variation, we must make active measurements …

    toronto-retro Repository record for Measuring the Inboard Side Scrape-off Layer of DIII-D Plasmas using Swing-probes (opens in a new tab)

  8. Modelling tokamak power exhaust and scrape-off-layer thermal transport in high-power fusion devices

    Managing the steady-state power loading onto the divertor target plates remains a major unresolved challenge facing tokamak fusion energy, that will be crucial for the success of the next generation of high-power reactor-level devices. This thesis will tackle two topics within this wide research …

    whiterose Download PDF for Modelling tokamak power exhaust and scrape-off-layer thermal transport in high-power fusion devices (opens in a new tab)

  9. On the influence of background including neutrals on the dynamics of 3D scrape-off layer filaments in fusion devices

    … influence of background profiles and neutrals on scrape-off layer (SOL) filaments in fusion devices using 3D simulations. This was achieved by seeding filaments on steady-state background profiles including neutrals. In terms of the filament motion, both direct and indirect interaction between the …

    dcu Download PDF for On the influence of background including neutrals on the dynamics of 3D scrape-off layer filaments in fusion devices (opens in a new tab)

  10. Impurity transport modelling in the scrape off layer of the MAST tokamak using DIVIMP-OSM-EIRENE and carbon injection

    … the nature of transport in the plasma core and scrape-off layer. Direct measurements of impurity transport have been made by injecting carbon ions into the MAST tokamak using an electrical discharge between 2 carbon electrodes. The emission of the resultant carbon plumes was measured by 2 …

    dcu Download PDF for Impurity transport modelling in the scrape off layer of the MAST tokamak using DIVIMP-OSM-EIRENE and carbon injection (opens in a new tab)

  11. 2-D magnetic equilibrium and transport modeling of the X-divertor and super X-divertor for scrape-off layer heat flux mitigation in tokamaks

    … the X-Divertor (XD) and Super X-Divertor (SXD), offer a magnetic solution to the heat flux problem by (a) increasing the plasma-wetted area via flux expansion at the targets, and (b) possibly opening regimes of stable, detached operation of the divertor via flux tube flaring, as quantified by the …

    texas Repository record for 2-D magnetic equilibrium and transport modeling of the X-divertor and super X-divertor for scrape-off layer heat flux mitigation in tokamaks (opens in a new tab)

  12. The effect of ion-orbit-loss on the distribution of ion, energy and momentum from the edge plasma into the scrape-off layer in tokamaks

    … fluxes from the plasma edge into the tokamak scrape-off layer (SOL) are analyzed for a representative DIII-D H-mode discharge. IOL yields large fluxes of particle, energy and momentum, distributed poloidally over the SOL, but predominantly into the outboard SOL, significantly changing the …

    gatech Repository record for The effect of ion-orbit-loss on the distribution of ion, energy and momentum from the edge plasma into the scrape-off layer in tokamaks (opens in a new tab)

  13. The impact of separatrix conditions on pedestal-SOL coupling: an investigation with integrated transport solvers

    … plasma defined by its height and width, with the scrape-off layer. The scrape-off layer is a region of unconfined plasma adjacent to the pedestal that connects the main plasma to the material targets, known as the divertor. The pedestal and scrape off layer are intimately linked regions separated …

    aalto Repository record for The impact of separatrix conditions on pedestal-SOL coupling: an investigation with integrated transport solvers (opens in a new tab)

  14. Global Gyrokinetic Particle Simulations of Circular Limiter Tokamak Plasmas

    … to this, the ELMFIRE capability to simulate scrape-off layer plasmas is examined in a toroidal limiter-like configuration. The results of this study show a formation of sheath potential and plasma flows as well as a modification of density and temperature profiles in the scrape-off layer. A …

    aalto Repository record for Global Gyrokinetic Particle Simulations of Circular Limiter Tokamak Plasmas (opens in a new tab)

  15. An examination of the effects of neutral particles on the edge plasma in tokamaks

    … distributions throughout the edge pedestal, scrape-off layer and surrounding halo region, divertor, and private flux regions. The effectiveness of the different neutral sources for fueling the confined plasma is evaluated.

    gatech Repository record for An examination of the effects of neutral particles on the edge plasma in tokamaks (opens in a new tab)

  16. Ion temperature measurements in STOR-M boundary plasmas using a retarding field energy analyzer

    … technique to measure the ion temperature in the Scrape-Off Layer (SOL) and edge of magnetic fusion devices. Design and operation features of a single-sided (facing the ion down stream side) RFEA for ion temperature measurements in the STOR-M tokamak are described. Its compact size (21 × 15 × 20 …

    sask Repository record for Ion temperature measurements in STOR-M boundary plasmas using a retarding field energy analyzer (opens in a new tab)

  17. Validation of tungsten erosion and transport simulations in tokamaks

    … components, their ionisation in the scrape-off layer, and the transport of W ions parallel and perpendicular to the magnetic field in the scrape-off layer, pedestal, and core plasma regions. In this thesis, the predicted W erosion rate at the JET divertor targets is found to have a …

    aalto Repository record for Validation of tungsten erosion and transport simulations in tokamaks (opens in a new tab)

  18. Experimental Studies Of Neutral Particles And The Isotope Effect In The Edge Of Tokamak Plasmas

    … transport from the edge pedestal region into the Scrape-Off Layer. Current experiments typically use deuterium (H with amu=2 or D), however future fusion power plants may startup with hydrogen (H), and eventually burn a mixture of deuterium and tritium (H with amu=3 or T). As isotope mass …

    wm-mary Repository record for Experimental Studies Of Neutral Particles And The Isotope Effect In The Edge Of Tokamak Plasmas (opens in a new tab)

Page 1 of 3