Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 1842 for “"Screw"”.

  1. A comprehensive study on screw design and process optimization of single-screw and twin-screw extrusion of polypropylene

    … to make the proper recommendations on overall screw design of both single-screw extruders (SSE) and twin-screw extruders (TSE). In this paper, we present a detailed approach to comparing the screw designs of a 30 L/D Brabender SSE and a 32 L/D Japan Steel Works TSE on their effectiveness of …

    jhu Repository record for A comprehensive study on screw design and process optimization of single-screw and twin-screw extrusion of polypropylene (opens in a new tab)

  2. The effect of screw torque maintenance and re-applying screw torque on the retention of prosthetic screw for multi-unit implant restorations

    … compare different multi unit abutment prosthetic screw tightening protocols in terms of reverse torque values (RTV). Additionally, the effect of torquing and retorquing the same screw on RTV is also investigated. Methods: Nine implants (Nobel Replace Select, Nobel Biocare) with straight multiunit …

    manitoba Repository record for The effect of screw torque maintenance and re-applying screw torque on the retention of prosthetic screw for multi-unit implant restorations (opens in a new tab)

  3. Pedicle Screw Insertion Surgical Simulator

    … is required to straighten the spine. Pedicle screw insertion is a common procedure for scoliosis surgery. The technique requires the placement of screws from the pedicle into the spine. A rod is used to connect all the pedicle screws. The spine is straightened during the connection process. …

    waterloo Repository record for Pedicle Screw Insertion Surgical Simulator (opens in a new tab)

  4. Rotordynamics of Twin-Screw Pumps

    Twin-screw pumps are positive displacement machines. Two meshing screws connected by timing gears convey the fluid trapped in the screw chambers axially from suction to discharge and force it out against the back pressure. Because of the screw geometry, the circumferential pressure field around the …

    tamu Repository record for Rotordynamics of Twin-Screw Pumps (opens in a new tab)

  5. Delamination in screw cap closures

    Thesis (M.S.)--Michigan State University of Agriculture and Applied Science. Department of Forest Products, 1957

    msu Repository record for Delamination in screw cap closures (opens in a new tab)

  6. Modelling forces in milling screw rotors

    The deflections of screw rotors under machining forces cause mismatch between the male and female rotors and, consequently, accelerated wear and suboptimal efficiency in their performance. Optimizing the machining process to minimize the generated forces and accounting for the resulting mismatch in …

    uvic Repository record for Modelling forces in milling screw rotors (opens in a new tab)

  7. Experimental Analysis of Archimedes Screw Turbines

    … how power and efficiency in Archimedes screw turbines (AST) is impacted by varying parameters including; length, inner and outer diameter, pitch and number of flights. An index was created that determined how important some variables were over others by testing a number of laboratory …

    guelph Repository record for Experimental Analysis of Archimedes Screw Turbines (opens in a new tab)

  8. Clearance management in twin screw compressors

    Although the performance of twin screw compressors is heavily dependent on the rotor clearances within them, chamber models, used as design aids, allow for the specification of their magnitude and distribution but do not account for how these may vary during operation, as a result of internal …

    city-london Download PDF for Clearance management in twin screw compressors (opens in a new tab)

  9. TWIN SCREW WET AND DRY GRANULATION

    Twin screw granulation has gained wide interest by pharmaceutical manufacturing and the industry is still trying to expand its application. This thesis will further explore this technique and try to develop a new granulation strategy based on similar machinery setups. This thesis is firstly focused …

    mcmaster Repository record for TWIN SCREW WET AND DRY GRANULATION (opens in a new tab)

  10. Twin screw extrusion of Teff flour

    Thesis (M.S.)--Michigan State University. Department of Agricultural Engineering, 1995

    msu Repository record for Twin screw extrusion of Teff flour (opens in a new tab)

  11. Understanding the Relationship Between the Bimodal Particle Size Distribution and Screw Design for Twin-Screw Wet Granulation

    … considered an undesirable characteristic of twin-screw wet granulation by the pharmaceutical industry, though its causes are still being investigated. Under a new hypothesis that its source was attributed to the function of kneading block elements in the screw design, this work examined the effect …

    mcmaster Repository record for Understanding the Relationship Between the Bimodal Particle Size Distribution and Screw Design for Twin-Screw Wet Granulation (opens in a new tab)

  12. Load Resistance of Monolithic Zirconia Screw-Retained Implant-Supported Single Crowns with Straight and Angulated Screw Channel Designs

    Recently popular angulated screw channel (ASC) crowns provide a prosthetic alternative to cement retention when implant trajectory is incompatible with traditionally designed screw- retained crowns. This study aimed to evaluate the fracture toughness of monolithic zirconia screw-retained …

    buffalo Repository record for Load Resistance of Monolithic Zirconia Screw-Retained Implant-Supported Single Crowns with Straight and Angulated Screw Channel Designs (opens in a new tab)

  13. Computer aided design of twin screw compressors

    The twin screw refrigeration compressor is required to run over a large range of working conditions. In order to design an advanced and high-efficiency compressor economically, computer aided design techniques are required. This thesis presents such techniques, which include profile generation, …

    strathclyde Repository record for Computer aided design of twin screw compressors (opens in a new tab)

Page 1 of 93