Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 27 for “"Screw press"”.

  1. Predicting dewatering equipment performance from laboratory tests

    … characteristics of a bench-scale belt filter press and a full-scale screw press, and to develop a suitable bench-scale test to simulate dewatering in a full-scale screw press. Tests were conducted to determine the effect of pressure and shear on dewatering of anaerobically digested, alum, …

    vt Repository record for Predicting dewatering equipment performance from laboratory tests (opens in a new tab)

  2. Optimization of Jatropha Oil Extraction and Its By-Product Utilization by Pyrolysis Method

    … condition of Jatropha seed extraction via a screw press and its by-product utilization by a pyrolysis method for achieving the maximum mass conversion and energy recovery. In this study, Jatropha seeds were first extracted by a screw press with different discharge aperture sizes, namely, …

    tamu Repository record for Optimization of Jatropha Oil Extraction and Its By-Product Utilization by Pyrolysis Method (opens in a new tab)

  3. Mechanical dewatering of chopped alfalfa

    … major objective of this research is to find the pressure levels required to remove some of the initial moisture from shredded alfalfa and the quality of the pressed pulp and juice if alfalfa is mechanically dewatered in a pressure cell. The results from dewatering using the pressure cell are used …

    sask Repository record for Mechanical dewatering of chopped alfalfa (opens in a new tab)

  4. Sugarcane juice extraction and preservation, and long-term lime pretreatment of bagasse

    New technologies, such as an efficient vapor-compression evaporator, a stationary lime kiln (SLK), and the MixAlco process, compelled us to re-evaluate methods for producing sugar from cane. These technologies allow more water and lime to be used, and they add more value to bagasse. Extracting and …

    tamu Repository record for Sugarcane juice extraction and preservation, and long-term lime pretreatment of bagasse (opens in a new tab)

  5. Studies on the Quality of Soybean Oil: Extraction Method, Soybean Type, and Oxidative Stability

    The Extrusion Aided Screw Press process is an alternative method for the production of soybean oil. It combines short time high temperature extrusion with a conventional screw press to obtain soy oil and meal of high quality. Different soybean varieties (some with altered fatty acid, lipoxygenase, …

    uiuc Repository record for Studies on the Quality of Soybean Oil: Extraction Method, Soybean Type, and Oxidative Stability (opens in a new tab)

  6. Energy recovery from anaerobic digestate combined with nutrient management

    … used separators: decanter centrifuge, and screw press. Operational parameters of the separators were varied to determine the most efficient method of operation for each and achieve the best separation efficiency. Separation by decanter centrifuge was shown to partition up to 71.5% …

    qu-belfast Repository record for Energy recovery from anaerobic digestate combined with nutrient management (opens in a new tab) Download PDF for Energy recovery from anaerobic digestate combined with nutrient management (opens in a new tab)

  7. Conditioning for shear in sludge dewatering

    … studies were performed using a plate and frame press, a centrifuge, and a screw press to determine the amount of shear within each device and to develop a means of estimating polymer dose for each device. It was determined that increased molecular charge of polymer decreased chemical dose …

    vt Repository record for Conditioning for shear in sludge dewatering (opens in a new tab)

  8. Novel experimental methodology for the investigation of recrystallisation during industrial hot forging of Inconel 718

    … of double truncated cones (DTC)on a hydraulic press, DTC forging on a screw press (high strain rates) and complex geometrydisc forging on the screw press. As part of the proposed methodology, the notion of the zerorecrystallization boundary was introduced; experimentally constructed and …

    strathclyde Repository record for Novel experimental methodology for the investigation of recrystallisation during industrial hot forging of Inconel 718 (opens in a new tab)

  9. EXPLORING THE IMPACT OF PRESSING: FROM GRAPE COMPOSITION TO SPARKLING WINE PRODUCTION.

    Pressing has a relevant impact on the characteristics of the must and, consequently, the wine produced with it. Therefore, the appropriate management of pressing leads to balanced chemical characteristics, in particular in terms of organic acid, potassium and pH, as well as the adequate extraction …

    milano Repository record for EXPLORING THE IMPACT OF PRESSING: FROM GRAPE COMPOSITION TO SPARKLING WINE PRODUCTION. (opens in a new tab)

  10. Optimization of sweet sorghum processing parameters

    … extraction expected to provide higher juice expression efficiencies than previous methods. The sweet sorghum stalks are chopped and the sugar-laden pith fraction is separated from the fibrous rind-leaf. The pith portion only is then fed through a screw press for juice extraction. Several …

    vt Repository record for Optimization of sweet sorghum processing parameters (opens in a new tab)

  11. Production of high quality soybean oil and meal: Studies on extraction methods, processing steps, deep-fat frying and optimization of extrusion aided screw pressing

    … frying time and optimization of extrusion aided screw pressing on the quality of soybean oil and meal. The Crude soybean oil was obtained by commercial hexane solvent extraction (SE), or extrusion aided screw pressing (EASP) or by low temperature screw pressing (SP) methods. Five gallons of each …

    uiuc Repository record for Production of high quality soybean oil and meal: Studies on extraction methods, processing steps, deep-fat frying and optimization of extrusion aided screw pressing (opens in a new tab)

  12. ASSESSMENT OF DIFFERENT SOLID-LIQUID SEPARATION TECHNIQUES FOR LIVESTOCK SLURRY

    … In particular, the separation efficiency of two screw press separators were compared to the separation efficiency of a decanting centrifuge, in order to evaluate the separation system that allow a better biological removal nitrogen. Both the screw press and the decanting centrifuge treated …

    milano Repository record for ASSESSMENT OF DIFFERENT SOLID-LIQUID SEPARATION TECHNIQUES FOR LIVESTOCK SLURRY (opens in a new tab)

  13. Determination Of Optimum Polymer Dose For Grand Forks Wastewater Treatment Plant Lagoon Sludge Dewatering

    … reason the GFWWTP is interested in introducing screw press system for the dewatering process. As a part of this upgrade plan, the existing lagoon will be decommissioned. Biosolids from this lagoon will be dewatered and will be used beneficially. Polymers are used for coagulating sludge solid …

    nodak Repository record for Determination Of Optimum Polymer Dose For Grand Forks Wastewater Treatment Plant Lagoon Sludge Dewatering (opens in a new tab)

  14. The Effect of Destoning and Enzymatic Pretreatments on the Biofuel Production from Olive Cake

    … centrifugation and screening by horizontal screw press, were first compared. Both methods removed an equal percentage of stones (95%), but centrifugation partitioned the majority (57 – 79%) of digestible solids (olive pulp) with the stones. Then, two strategies were compared to maximize both …

    calpoly Repository record for The Effect of Destoning and Enzymatic Pretreatments on the Biofuel Production from Olive Cake (opens in a new tab)

  15. Leaf protein concentrate from paunch grass and green waste: A technoeconomic analysis and lifecycle assessment

    … manufacturing method uses two passes through a screw press with intermediary maceration to extract the PG and GW leaf proteins into a liquor; the liquor is then acidified with hydrochloric acid and the protein coagulated by steam injection (85°C, 30 seconds), to achieve 45.9 to 62.0 mass percent …

    waikato-masters Repository record for Leaf protein concentrate from paunch grass and green waste: A technoeconomic analysis and lifecycle assessment (opens in a new tab) Download file for Leaf protein concentrate from paunch grass and green waste: A technoeconomic analysis and lifecycle assessment (opens in a new tab)

  16. A systems analysis of sweet sorghum harvest for a Piedmont ethanol industry

    … fractions, pass only the pith fraction through a screw press, and thus achieve an improvement in juice expression efficiency and press capacity. The operation of three alternative harvesting/processing systems were modeled and compared using computer simulation to determine which system could …

    vt Repository record for A systems analysis of sweet sorghum harvest for a Piedmont ethanol industry (opens in a new tab)

  17. Renewable energy in Sicily: sizing of a plant for Biogas production and energetic assessment of Biodiesel production from oilseed crops

    … sativa, with particular attention to the pressing of the seeds and the trans-esterification of vegetable oils. As regards the first topic the aim of the work was to develop a procedure for verifying the availability of biomass for biogas production in a territory of Ragusa province …

    catania Repository record for Renewable energy in Sicily: sizing of a plant for Biogas production and energetic assessment of Biodiesel production from oilseed crops (opens in a new tab)

  18. Computational generation of wear maps for H13 tool steel in open die hot forging

    … with furnace temperature and energy in the screw press as the main variables. The FEA results were validated with a series of physical trials. A similar experiment was repeated after nitriding the tool by 0.1mm case depth. The comparison between the FE simulations and physical trials showed …

    strathclyde Repository record for Computational generation of wear maps for H13 tool steel in open die hot forging (opens in a new tab)

Page 1 of 2